LINDBYN Mirror
IKEA
Important Information Regarding Wall Mounting
As wall materials vary, screws for fixing the mirror to the wall are not included. For advice on suitable screw systems and wall anchors, please contact your local specialized dealer.
Assembly Steps
Step 1: Measure and Mark
Gather your tools: a spirit level ?, pencil ✏️, and tape measure ?. Measure and mark the desired mounting points on the wall. Ensure these marks are level. The recommended distance between the mounting points is approximately 53 cm (21 inches) or 51.5 cm (20 1/4 inches), depending on the mirror's design and your chosen mounting method.
Step 2: Install Wall Anchors and Screws
Insert appropriate wall anchors (not included) into the marked points on the wall. Then, securely fasten the screws (not included) into the anchors. Ensure the screws are firmly in place, but do not overtighten. A STOP ? symbol indicates caution during this step.
Step 3: Hang the Mirror
Carefully lift the LINDBYN mirror. Align the mounting brackets on the back of the mirror with the installed screws on the wall. Gently slide the mirror into place.
Step 4: Adjust and Level
Use a screwdriver ? to adjust the screws. This allows for fine-tuning the mirror's angle and ensuring it is perfectly level and securely positioned on the wall. The information icon ⓘ indicates this adjustment step.
