LINDBYN Mirror

Step 1: Mark Mounting Points

Gather the necessary tools: a spirit level, a pencil, and a tape measure.

Diagram shows a person holding a spirit level, pencil, and tape measure, indicating they are needed for marking.

Measure and mark two points on the wall where the mirror will be hung. Ensure these points are level. The distance between the two marked points should be 65.5 cm (25 3/4 inches).

Diagram shows a mirror outline on the wall, with two 'X' marks indicating screw points. A spirit level is shown positioned horizontally above the mirror outline, and a tape measure indicates the distance between the two 'X' marks as 65.5 cm (25 3/4"). A pencil is shown marking one of the points.

Step 2: Prepare Wall Fixings

Select appropriate screws and wall anchors based on your wall material. If unsure, consult a specialist.

Diagram shows various types of screws and wall anchors. A [STOP] symbol is present, indicating caution or the need for specific fasteners.

Note: Ensure you use fasteners suitable for your wall type. Incorrect fixings can lead to damage or the mirror falling.

Step 3: Hang the Mirror

Carefully hang the mirror onto the wall fixings.

Diagram shows the mirror being placed onto the previously marked points on the wall, with arrows indicating the direction of placement.