LINDBYN Mirror
[IKEA logo] Design and Quality IKEA of Sweden
Important Information Regarding Wall Mounting
This product requires wall mounting. As wall materials vary greatly, screws for fixing to the wall are not included. For advice on suitable screw systems and fixings for your specific wall type, please contact your local specialized dealer or IKEA store.
Tools and Preparation
Before you begin, gather the necessary tools:
- [Spirit level]
- [Pencil]
- [Tape measure]
If you are unsure about the correct mounting hardware, seek advice from a specialist.
Assembly Steps
Step 1: Marking
Measure and mark two points on the wall for mounting. The distance between these points should be 98.2 cm (38 5/8 inches). Use a spirit level to ensure the marks are horizontal.
Step 2: Selecting Fixings
Note: Screws and wall fixings are not included. It is crucial to use screws and fixings that are appropriate for your wall material. The diagram indicates a "STOP" symbol [stop symbol], emphasizing the need to select the correct hardware to ensure safe and secure mounting.
Step 3: Mounting the Mirror
Carefully attach the mirror to the wall using the selected screws and fixings.