LINDBYN Mirror
Assembly Instructions from IKEA
General Information
This document provides assembly instructions for the LINDBYN mirror. The content is presented in English, consolidating information originally available in Spanish, Catalan, Basque, and Galician.
Due to the wide variety of wall materials, screws for wall mounting are not included with this product. For recommendations on suitable fixing systems, please consult a specialist.
Assembly Steps
Step 1: Marking
Mark two points on the wall for mounting. The distance between these points should be 98.2 cm (38 5/8 inches). Use a spirit level and pencil for accuracy. The diagram shows a mirror outline with two hanging points indicated.
Visual Aid: Tools required for assembly include a spirit level, a pencil, and a tape measure. Another illustration shows a person looking confused at furniture parts, then making a phone call to IKEA, presumably for assistance.
Step 2: Wall Preparation
Prepare the wall. Insert appropriate wall fixings (e.g., screws and wall plugs, not included) into the marked points. A 'STOP' symbol is shown, indicating caution or the need for specific types of fasteners suitable for the wall material.
Visual Aid: Diagram shows two wall plugs and screws. A magnified view shows a screw being inserted into a wall plug, with a 'STOP' symbol indicating a caution or specific fastener requirement.
Step 3: Hanging the Mirror
Hang the mirror. Carefully attach the mirror to the wall fixings.
Visual Aid: Diagram shows the mirror being hung onto the wall fixings.
