Momcozy Wearable Breast Pump

Front: Installation and Usage

Installation Instructions

Wash hands before installation.

1. Attach the membrane and valve to the connector.

   Diagram showing a flexible membrane and a valve component being attached to a connector piece.

2. Attach the assembled connector to the milk collector. Align the "ear" with the groove.

   Diagram showing the assembled connector being attached to the milk collector. An inset highlights aligning a tab ('ear') with a groove for proper connection.

3. Attach the breast shield to the milk collector.

   Diagram showing the breast shield being attached to the milk collector.

4. Assemble the pump and milk collector.

   Diagram showing the pump unit being attached to the assembled milk collector.

Pouring Milk

Hold the milk collector upright when pouring milk.

Illustration showing the correct way to hold the milk collector upright (✓) when pouring milk, versus an incorrect tilted position (X).

For more information on troubleshooting, watch the troubleshooting video. Scan the QR code to access the troubleshooting video. [QR Code for troubleshooting video]

Back: Pumping Tips and Care

Preventing Milk Leaks and Breast Milk Pumping Tips

1. Lean forward and ensure your nipple is centered within the breast shield. The breast pump must form a tight seal against your breast.

   Diagram illustrating leaning forward and ensuring proper nipple alignment within the breast shield for a tight seal.

2. It is recommended to use supportive nursing bras that help create a tight seal between your breasts and the breast shield.

3. Ensure the pump is assembled correctly.

4. Sit or stand while pumping; do not lie down.

Cleaning and Sterilization

Non-washable parts: Pump motor

Washable parts: Milk collector, Breast shield, Membrane, Connector, Valve

We recommend cleaning washable parts with soapy water (40-60°C / 104-140°F) for 3-5 minutes. For sterilization, use boiling water, steam, or a sterilizer at a temperature not exceeding 100°C (212°F). Boil and sterilize parts for 5-10 minutes.

It is not recommended to sterilize breast pump parts in a microwave, as this can shorten their lifespan.

Tips

• The expected lifespan of washable parts is 1-3 months. It is recommended to replace washable parts after prolonged storage or before pumping for another child.
• The breast pump automatically shuts off after 30 minutes of inactivity. If irritation or discomfort occurs, discontinue use and consult a healthcare professional.

For any questions, please contact us via email: support@momcozy.com