Costway 3-Piece Kitchen Dining Set

Important Safety Information

Before You Start / Avant de Commencer

• ⚠️ Please read all instructions carefully.
• ⚠️ Retain instructions for future reference.
• ⚠️ Separate and count all parts and hardware.
• ⚠️ Read through each step carefully and follow the proper order.
• ⚠️ We recommend that, where possible, all items are assembled near to the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled.
• ⚠️ Always place the product on a flat, steady, and stable surface.
• ⚠️ Keep all small parts and packaging materials for this product away from babies and children as they potentially pose a serious choking hazard.

Important Notes for Assembly

• ℹ️ Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid scratching the parts.
• ℹ️ Kindly follow the assembly instructions step by step.
• ℹ️ Do not tighten all screws and bolts until the table and stools are fully assembled.

Parts List - Table

Hardware List - Table

Note: A Phillips Head Screw Driver is required but not included.

Assembly Instructions - Table

Step 01: Assemble Table Base

Attach the table rack supports (B and C) to the underside of the table top (A) using the provided hardware. This forms the base structure for the table. The diagram shows the placement of the long supports (B) and short supports (C) to create a rectangular frame. Hardware items 1, 2, 3, 4, 5, and 6 are indicated for this step. A Phillips Head Screw Driver is required.

Step 02: Attach Legs and Stretchers

Connect the left table legs (E) and right table legs (D) to the assembled table base. Attach the table stretchers (F) between the legs for stability. The diagram illustrates how the legs and stretchers are positioned and secured with hardware (bolts, washers, Allen key).

Step 03: Finalize Table Assembly

The diagram shows the fully assembled table. Note: Fully tighten all bolts. Remark: May require two people to turn the assembled unit upright.

Parts List - Stools

Hardware List - Stools

Assembly Instructions - Stools

Step 04: Assemble Stool Frame

Connect the left chair legs (I) and right chair legs (H) using the short (J) and long (K) chair stretchers. Secure these components with the provided bolts, washers, and Allen key (5). The diagram shows the arrangement of the legs and stretchers.

Step 05: Attach Chair Seats

Place the chair seats (G) onto the assembled stool frames. Secure the seats using the screws (2). The diagram illustrates this process.

Step 06: Finalize Stool Assembly

The diagram shows the fully assembled stool. Note: 1. Fully tighten all bolts. 2. The stool can be hung on the shelf under the table to save storage space. (See diagram on page 7).

Return and Damage Claim Instructions

• ❌ DO NOT discard the box / original packaging. In case a return is required, the item must be returned in the original box. Without this, your return will not be accepted.
• ? Take a photo of the box markings. A photo of the markings (text) on the side of the box is required in case a part is needed for replacement. This helps staff identify your product number to ensure you receive the correct parts.
• ? Take a photo of the damaged part (if applicable). A photo of the damage is always required to file a claim and get your replacement or refund processed quickly. Please make sure you have the box even if it is damaged.
• ✉️ Send us an email with the images requested. Email directly from the marketplace where your item was purchased with the attached images and a description of your claim.

Contact Information

If you're having difficulty, our friendly customer team is always here to help.

• USA office: Fontana | Email: cs.us@costway.com
• AUS office: Truganina | Email: cs.au@costway.com
• GBR office: FDS Corporation Limited, Unit 4, Blackacre Road, Great Blakenham, Ipswich, Ip6 0FL, United Kingdom | Email: cs.uk@costway.com
• FRA office: Saint Vigor d'Ymonville | Email: cs.fr@costway.com