Costway 7-Piece Bar Table Set User's Manual

Contact Us!

Do NOT return this item. Contact our friendly customer service department for help first.

E-mail: US: cs.us@costway.com, UK: cs.uk@costway.com

Please give us a chance to make it right and do better! Replacements for missing or damaged parts will be shipped ASAP!

Follow Costway on social media: [Facebook icon] [Twitter icon] [Instagram icon] [YouTube icon]

Before You Start

• Read each step carefully before starting. It is very important to ensure each step is followed in the correct order, otherwise assembly difficulties may occur.
• Most of the board parts are labeled or stamped on the raw edges. Have a check to make sure all parts are included.
• Work in a spacious area, preferably on a carpet close to where the unit will be used.
• Keep the hand tools close at hand. Do not use power tools to assemble your furniture. They may scratch or damage the parts.

Hardware inside:

A: M4x15mm Screw (x14 pcs)

B: M4x40mm Screw (x54 pcs)

C: M6 x 15mm Bolt (x12 pcs)

D: M6 x 20mm Bolt (x72 pcs)

E: M6 x 25mm Bolt (x12 pcs)

F: M6x18x2 Washer (x12 pcs)

G: Allen key (x2 pcs)

Component List:

1. Bar table top with dowels (x1 pc)

2. Bar table top with holes (x1 pc)

3. Table leg (x2 pcs)

4. Table stretcher (x2 pcs)

5. Table Apron 1 (x2 pcs)

6. Table Apron 2 (x2 pcs)

7. Apron connector (x6 pcs)

8. Left Chair leg (x6 pcs)

9. Right Chair leg (x6 pcs)

10. Cross bar (x6 pcs)

11. Chair seat (x6 pcs)

12. Front Chair apron (x6 pcs)

13. Chair back (x6 pcs)

14. Parasol cap (x1 pc)

Assembly Instructions

STEP 1: X6

Attach table legs (9) to the table apron connectors (7) using bolts (D) and washers (F). Ensure 50% tightness initially, then fully tighten to 100%.

Visual Description: This step shows the assembly of the chair legs to the apron connectors. The diagram indicates using 6 sets of parts, with specific hardware (D, F) and components (7, 9) labeled.

STEP 2: X6

Attach chair legs (8, 9) to the chair seat (11) using bolts (D). Ensure 50% tightness initially, then fully tighten to 100%.

Visual Description: This step illustrates attaching the chair legs to the chair seat. The diagram shows using 6 sets of parts, with components (8, 9, 11) and hardware (D) indicated.

STEP 3: X6

Attach the assembled chair legs and seat to the cross bars (10) using screws (B).

Visual Description: This step shows the assembly of the chair frame, connecting the legs and crossbars with screws (B).

STEP 4: X6

The completed bar stool is shown.

Visual Description: A fully assembled bar stool is depicted.

STEP 5: X2

Assemble the table frame by connecting the table legs (3) to the table aprons (5, 6) using bolts (E) and screws (A).

Visual Description: This step shows the assembly of the table base, connecting legs and aprons with specific hardware (A, E).

STEP 6

Attach the table stretchers (4) to the table legs (3) using bolts (C).

Visual Description: This step illustrates attaching the table stretchers to the table legs using bolts (C).

STEP 7

Connect the two table top pieces (1) and (2).

Visual Description: This step shows joining the two parts of the table top.

STEP 8

Attach the assembled table top to the table frame using screws (A).

Visual Description: This step shows securing the table top to the table base with screws (A).

STEP 9

Attach the assembled chair legs and seat to the table legs (3) using screws (A).

Visual Description: This step shows connecting the chair frames to the table legs using screws (A).

STEP 10

Attach the assembled chair frames to the table frame using screws (B).

Visual Description: This step shows further securing the chair frames to the table structure with screws (B).

STEP 11

Attach the parasol cap (14) to the table top using screws (B).

Visual Description: This step shows the attachment of the parasol cap to the table top with screws (B).

STEP 12

The assembled bar table is shown.

Visual Description: A fully assembled bar table is depicted.

STEP 13

The complete 7-piece bar table set is shown.

Visual Description: An illustration of the fully assembled 7-piece bar table set, including the table and six stools.

STEP 14

The complete 7-piece bar table set is shown from a different angle.

Visual Description: A different perspective of the fully assembled 7-piece bar table set.

STEP 15

The complete 7-piece bar table set is shown from yet another angle.

Visual Description: Another angle of the fully assembled 7-piece bar table set.

Care and Maintenance

• Use a soft, clean cloth that will not scratch the surface when dusting.
• Use of furniture polish is not necessary.
• Should you choose to use polish, test first in an inconspicuous area.
• Using solvents of any kind on your furniture may damage the finish.
• Liquid spills should be removed immediately. Using a soft clean cloth, blot the spill gently. Avoid rubbing.
• Check bolts/screws periodically and tighten them if necessary.

Further advice about wood furniture care

Please protect your outdoor furniture with a cover when not in use since long-term sunlight exposure will result in damage to the surface.

In addition to sunlight damage, wood and metal frames suffer when exposed to extremes in temperature and humidity.

Proper care and cleaning at home will extend the life of your purchase. Following these important and helpful tips will enhance your furniture as it ages.

Welcome to visit our website and purchase our quality products!

With your inspiring rating, Costway will be more consistent to offer you EASY SHOPPING EXPERIENCE, GOOD PRODUCTS and EFFICIENT SERVICE!

US office: Fontana, California

UK office: Ipswich

Benefits of shopping with Costway:

• Reward Points
• Exclusive Customer Service
• Personalized Recommendations
• Permanent Shopping Cart
• Order History

5 Star Rating

We would like to extend our heartfelt thanks to all of our customers for taking time to assemble this product and giving us valuable feedbacks. THANK YOU!