PUB TABLE STOOL SET HW63991
User's Manual
Important Safety Information
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Contact Information & Preparation
Contact Us!
Do NOT return this item. Contact our friendly customer service department for help first. Replacements for missing or damaged parts will be shipped ASAP!
Email: US: cs.us@costway.com, UK: cs.uk@costway.com
Before You Start
Read each step carefully before starting. It is very important to ensure each step followed in correct order, otherwise assembly difficulties may occur.
Most of board parts are labeled or stamped on the raw edges. Have a check to make sure all parts are included.
Work in a spacious area, preferably on a carpet close to where the unit will be used.
Keep the hand tools close at hand. Do not use power tools to assemble your furniture. They may scratch or damage the parts.
Illustration: A box labeled "Hardware inside".
Assembly Instructions for HW63991 (Pub Table with Stools)
Read this instruction carefully. Refer hardware and furniture parts list for guidance. Be sure all parts are complete before assembling. Place all wooden furniture part on a clean and flat soft surface to prevent scratches. Refer steps provided as assembling guide.
Parts List (HW63991)
- A: Table Top with Apron (x1)
- B: Table Leg (Left) (x2)
- C: Table Leg (Right) (x2)
- D: Long Stretcher (x1)
- E: Short Stretcher (x2)
Hardware List (HW63991)
| Item | Description | Quantity |
|---|---|---|
| 1 | JCBC Screw (M6x60MM) | x 8 |
| 2 | Spring Washer (M6x13MM) | x 8 |
| 3 | Flat Washer (M7x19MM) | x 8 |
| 4 | Allen Key (M4x110MM) | x 1 |
| 5 | CSK Screw (M4x38MM) | x 6 |
Step 1
Illustration: Two Table Legs (B, C) are shown being attached to the Long Stretcher (D) using JCBC Screws (1), Spring Washers (2), and Flat Washers (3). A note indicates: "Do not tighten the hardware completely!".
Connect two Table Legs (B, C) to the Long Stretcher (D) using JCBC Screws (1), Spring Washers (2), and Flat Washers (3). Do not tighten the hardware completely.
Step 2
Illustration: Short Stretchers (E) are shown being attached to the Table Legs (B, C) using JCBC Screws (1), Spring Washers (2), and Flat Washers (3).
Attach the Short Stretchers (E) to the Table Legs (B, C) using JCBC Screws (1), Spring Washers (2), and Flat Washers (3).
Step 3
Illustration: The Table Top with Apron (A) is shown being attached to the assembled leg structure using JCBC Screws (1), Spring Washers (2), and Flat Washers (3). The text indicates to tighten all hardware completely after alignment.
Attach the Table Top with Apron (A) to the assembled leg structure using JCBC Screws (1), Spring Washers (2), and Flat Washers (3). Tighten all hardware completely after alignment is done.
Illustration: The completed pub table and two stools.
COMPLETED ASSEMBLY
Assembly Instructions for Stool Set (Separate Product)
Read this instruction carefully. Refer hardware and furniture parts list for guidance. Be sure all parts are complete before assembling. Place all wooden furniture part on a clean and flat soft surface to prevent scratches. Refer steps provided as assembling guide.
Parts List (Stool Set)
- F: Cushion Seat (x1)
- G: Long stretcher (x2)
- H: Short Stretcher (x2)
- I: Leg (x4)
Hardware List (Stool Set)
| Item | Description | Quantity |
|---|---|---|
| 1 | JCBC Screw (M6x50MM) | x 4 |
| 2 | Spring Washer (M6x13MM) | x 4 |
| 3 | Flat Washer (M7x19MM) | x 4 |
| 4 | Allen Key (M4x55MM) | x 1 |
| 5 | CSK Screw (M4x38MM) | x 8 |
Step 1
Illustration: Two Legs (I) are shown being attached to a Long Stretcher (G) using JCBC Screws (1), Spring Washers (2), and Flat Washers (3). A note indicates: "Do not tighten the hardware completely!".
Attach two Legs (I) to a Long Stretcher (G) using JCBC Screws (1), Spring Washers (2), and Flat Washers (3). Do not tighten the hardware completely.
Step 2
Illustration: The remaining two Legs (I) are shown being attached to the other Long Stretcher (G) and the Short Stretchers (H) using JCBC Screws (1), Spring Washers (2), and Flat Washers (3). A note indicates: "Tighten part (G) & part (H) completely."
Attach the remaining two Legs (I) to the other Long Stretcher (G) and the Short Stretchers (H) using JCBC Screws (1), Spring Washers (2), and Flat Washers (3). Tighten part (G) & part (H) completely.
Step 3
Illustration: The assembled leg structure is shown. The Cushion Seat (F) is being attached to the structure using JCBC Screws (1), Spring Washers (2), and Flat Washers (3). A note indicates: "Tighten part (I) with part (F) completely after alignment is done."
Attach the Cushion Seat (F) to the assembled leg structure using JCBC Screws (1), Spring Washers (2), and Flat Washers (3). Tighten part (I) with part (F) completely after alignment is done.
Illustration: The completed stool.
COMPLETED ASSEMBLY
Care and Maintenance
Use a soft, clean cloth that will not scratch the surface when dusting. Use of furniture polish is not necessary. Should you choose to use polish, test first in an inconspicuous area. Using solvents of any kind on your furniture may damage the finish. Never use water to clean your furniture as it may cause damage to the finish.
Liquid spills should be removed immediately. Using a soft clean cloth, blot the spill gently. Avoid rubbing.
Check bolts/screws periodically and tighten them if necessary.
Further advice about wood furniture care
It is best to keep your furniture in a climate-controlled environment. Extreme temperature and humidity changes can cause fading, warping, shrinking and splitting of wood.
It is advised to keep furniture away from direct sunlight as sun may damage the finish.
Proper care and cleaning at home will extend the life of your purchase. Following these important and helpful tips will enhance your furniture as it ages.
Customer Information
Welcome to visit our website and purchase our quality products!
Your suggestions and comments for COSTWAY are really important to us! We sincerely solicit you to go back to our shop and leave a good rating in just a simple click. It would be quite encouraging if you could kindly do so like below:
Example Feedback: "Great products so far February 24, 2019 Great products so far. Fast delivery, easy setup, and working without any issues."
With your inspiring rating, COSTWAY will be more consistent to offer you EASY SHOPPING EXPERIENCE, GOOD PRODUCTS and EFFICIENT SERVICE!
US office: Fontana, California
UK office: Ipswich
Website: www.costway.com
Benefits of shopping with Costway:
- Reward Points
- Exclusive Customer Service
- Personalized Recommendations
- Permanent Shopping Cart
- Order History
Illustration: A computer monitor showing the Costway website.
Illustration: A "Five Star Rating" graphic.
We would like to extend our heartfelt thanks to all of our customers for taking time to assemble this product and giving us valuable feedbacks.
Thank you
Follow Costway
Visit us: www.costway.com
[Facebook icon] [Twitter icon] [YouTube icon] [Instagram icon]
Assembly Requirement
Illustration: Icon indicating "1 person".
ASSEMBLED BY 1 ADULT
Floor Area Recommendation
Illustration: A square labeled "1MX1M".
FLOOR AREA 1MX1M
