Costway 3-Piece Wicker Bistro Sofa Set - User's Manual
Model: HW68667
This instruction booklet contains important safety information. Please read and keep for future reference.
If you are missing parts or have damaged parts, please contact our customer service department before returning the item. Replacements will be shipped as soon as possible.
Customer Service Contact:
- US: cs.us@costway.com
- UK: cs.uk@costway.com
- AU: cs.au@costway.com
Before You Start
- Read each step carefully before starting. Ensure each step is followed in the correct order to avoid assembly difficulties.
- Check that all parts are included. Most parts are labeled or stamped on the raw edges.
- Work in a spacious area, preferably on a carpet near where the unit will be used.
- Keep hand tools close at hand. Do not use power tools for assembly as they may scratch or damage the parts.
Parts List
| Label | Description | Quantity |
|---|---|---|
| A | Armrest Panel | 2 pcs |
| B | Side Panel | 2 pcs |
| C | Back Panel | 2 pcs |
| D | Seat Support Panel | 2 pcs |
| E | Seat Panel | 2 pcs |
| F | Table Top | 1 pc |
| G | Cushion | 2 pcs |
| H | Side Frame | 2 pcs |
| I | Bottom Frame | 1 pc |
| J | Table Side Panel | 2 pcs |
| K | Table Top | 1 pc |
| Hardware | Description | Quantity |
|---|---|---|
| 1 | M6x25 mm Screw | 20 pcs |
| 2 | M6x70 mm Screw | 8 pcs |
| 3 | M6x55 mm Screw | 12 pcs |
| 4 | Ø6x14x1 mm Washer | 44 pcs |
| 5 | Foot Pad | 8 pcs |
| 6 | M6x30 mm Screw | 12 pcs |
Assembly Steps
- Step 1: Attach Side Panels (B) to Armrest Panels (A) using Screws (2) and Washers (4). Repeat for the other side.
- Step 2: Connect the Back Panel (C) to the assembled Armrest Panels (A) using Screws (2) and Washers (4).
- Step 3: Assemble the Seat Support Panel (D) and Seat Panel (E) to the frame using Screws (1) and Washers (4). Repeat for the second chair.
- Step 4: Assemble the table frame. Attach Side Frames (H) to the Bottom Frame (I) using Screws (1) and Washers (4). Repeat for the other side.
- Step 5: Attach the Table Side Panels (J) to the assembled table frame using Screws (1) and Washers (4). Repeat for the other side.
- Step 6: Attach the table top support structure using Screws (6) and Washers (4).
- Step 7: Attach the table top (K) to the assembled table frame using Screws (6) and Washers (4).
- Step 8: Attach the Foot Pads (5) to the bottom of the chairs using Screws (3).
- Step 9: Attach the Foot Pads (5) to the bottom of the table using Screws (3).
- Step 10: Place the Seat Panels (E) into the chair frames.
- Step 11: Place the Cushions (G) onto the seats.
- Step 12: Place the Table Top (F) onto the table frame.
Care and Maintenance
- Use a soft, clean cloth that will not scratch the surface when dusting. Furniture polish is not necessary. If polish is used, test first in an inconspicuous area.
- Avoid using solvents of any kind, as they may damage the finish. Never use water to clean furniture as it may damage the finish.
- Remove liquid spills immediately by blotting gently with a soft, clean cloth. Avoid rubbing.
- Check bolts/screws periodically and tighten if necessary.
- Protect your outdoor furniture with a cover when not in use. Long-term sunlight exposure can damage the surface. Wood and metal frames can also be affected by extremes in temperature and humidity.
- Proper care and cleaning at home will extend the life of your purchase.
