HW69931 说明书 英语 有邮箱 单页 许颖 2023-12-14
29861473 5Pcs Furniture Set with Table
HW69931
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Before You Start
Please read all instructions carefully. Retain instructions for future reference. Separate and count all parts and hardware. Read through each step carefully and follow the proper order. We recommend that, where possible, all items are assembled near to the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled. Always place the product on a flat, steady and stable surface. Keep all small parts and packaging materials for this product away from babies and children as they potentially pose a serious choking hazard.
02
D B G
H I
x4
A
C
E F
03
Notice
1. 50% Tighten before fixing all screws, Allen wrench is recommended instead of an electric drill.
2. Place the item on a flat ground to adjust and make sure it remains stable.
3. Tighten up all screws with tools gradually. 4. If the screws are not aligned with holes during assembly, please
loosen all the other screws to 50% and continue the assembly process. 5. If the item is not stable, please loosen all the screws, adjust it on a flat ground and tighten up all screws again. 6. Note: If one or some screws are fully tightened during assembly, chances are the others will not be aligned with holes. In addition, all the holes are designed to be relatively larger to provide more space for the adjustment of the screws.
A x4 C x4
Front frame of armless chair
Seat frame of armless chair
B x8
Side frame of armless chair
D x4
Back frame of armless chair
E x2 G x1
Long frame of Table
Wooden Table Top
F x2 H x4
Short frame of Table
Long pillow
04
I x4
Seat cushion
1 x80
Bolt M6 X 30 mm
2 x52
Washers Ø6x14x1mm
3 x20
Block foot
4 x20
Foot cap M6x35mm
5 x6
Screw M6x15mm
6 x2
Allen key M4
05
1 Armless assembly
B
1
Connect Side frame (B)
& Front frame (A) with
Bolt (1) & Washer (2)
1
A
x4
2
C
Connect part from Step1
1
& Seat frame (C) with
Bolt (1) & Washers (2)
1
1 1
1
1
x4
06
3
D
11
1
1
Connect part from Step2 & Back frame (D) with Bolt (1) & Washers (2)
x4
4
3
1
4
3
1 4
3
1
1
4
Connect part from Step 3 & Block foot (3) with Bolt (1) & Foot cap(4)
3
1 14
07
5
H
I
Complete single chair
x4
6 Table assembly
E
1 1
F
1
1
Connect Long frame (E) & Short frame (F) with Bolt (1),& Washers (2)
08
7
5 5
G
5 5
5 5
Connect part from Step 5 & Wooden Table Top (G) with Screw (5)
8
3 1 4
3 1
4
Connect part from Step 6 (D) & Block foot (3) with Bolt (1), Foot cap(4)
3 1 4
09
9
Complete the table
FINISHED
10
Return / Damage Claim Instructions
DO NOT discard the box / original packaging. In case a return is required, the item must be returned in original box. Without this your return will not be accepted. Take a photo of the box markings. A photo of the markings (text) on the side of the box is required in case a part is needed for replacement. This helps our staff identify your product number to ensure you receive the correct parts.
Take a photo of the damaged part (if applicable). A photo of the damage is always required to file a claim and get your replacement or refund processed quickly. Please make sure you have the box even if it is damaged. Send us an email with the images requested. Email us directly from marketplace where your item was purchased with the attached images and a description of your claim.
11
USA office: Fontana
AUS office: Truganina
GBR office: FDS Corporation Limited,Unit 4, Blackacre Road, Great Blakenham,Ipswich, Ip6 0FL,United Kingdom
If you're having difficulty, our friendly customer team is always here to help.
USA:cs.us@costway.com AUS:cs.au@costway.com GBR:cs.uk@costway.com
Adobe PDF library 15.00 Adobe Illustrator 24.3 (Windows)