Yaheetech 615090 Cat Tree Assembly Instructions
This document provides detailed instructions for assembling your Yaheetech 615090 cat tree.
Safety Information
- We recommend 1 or more people to install. ???
- The expected assembly time is 1 h. ⏰
- Not intended for use by children. ??
- Keep away from fire or other heat sources. ??
- We recommend wearing protective gloves. ?
Assembly Tips
Please follow the instruction manuals and use a pad to avoid damage during assembly. This involves opening the product box, avoiding incorrect placement (indicated by a red cross ❌), and using a protective pad (indicated by a green checkmark ✔️) to safeguard the product and floor during installation.
Parts List
| Part Number | Description | Quantity |
|---|---|---|
| 1 | L-shaped Allen Wrench | 1x |
| 2 | Screw (16mm) | 4x |
| 3 | Screw (25mm) | 2x |
| 4 | Screw (35mm) | 19x |
| 5 | Screw (long, threaded rod) | 5x |
| 6 | Metal Bracket | 2x |
| 7 | Base Panel | 1x |
| 8 | Top Panel | 1x |
| 9 | Support Bracket | 1x |
| 10 | Hanging Toy Ball with String | 3x |
| 11 | Side Panel with Opening | 1x |
| 12 | Cubby Module with Opening | 2x |
| 13 | Bowl Attachment | 1x |
| 14 | Sisal-wrapped Post (45cm) | 3x |
| 15 | Sisal-wrapped Post (22.3cm) | 1x |
| 16 | Sisal-wrapped Post (22.3cm) | 1x |
| 17 | Small Post (15cm) | 1x |
| 18 | Sisal-wrapped Post (35cm) | 3x |
| 19 | Post (27cm) | 6x |
| 20 | Post (45cm) | 1x |
| 21 | Wall Mounting Kit (screws and anchors) | 1x |
Assembly Instructions
Step 1
Assemble two cubby modules (part 12). Attach them to the base panel (part 7) using six screws (part 4) and three posts (part 19).
Step 2
Attach the base panel (part 7) to four sisal-wrapped posts (part 14) and one post (part 20) using four screws (part 4).
Step 3
Attach two metal brackets (part 6) to the top panel (part 8) using two screws (part 2). Attach one hanging toy ball (part 10) to the top panel (part 8) using one screw (part 3). Attach the side panel with opening (part 11) to the top panel (part 8) using one screw (part 4).
Step 4
Attach two sisal-wrapped posts (part 15) and one sisal-wrapped post (part 14) to the base panel (part 7) using screws (part 4) and (part 5). Attach the top panel (part 8) to these posts using screws (part 5).
Step 5
Attach three sisal-wrapped posts (part 3), (part 16), (part 17) to the structure using screws (part 4) and (part 5). Attach the bowl attachment (part 13) and one hanging toy ball (part 10) using screws (part 3) and (part 17).
Step 6
Attach two support brackets (part 9) to the structure using screws (part 4) and (part 5). Attach the two cubby modules (part 12) using two screws (part 18).
Step 7
Attach two hanging toy balls (part 10) and two sisal-wrapped posts (part 18) to the top platforms using screws (part 3), (part 4), (part 10), and (part 18).
Step 8
Attach the final hanging toy ball (part 10) to the top platform using one screw (part 10).
Product Care Instructions
- Use a soft, clean cloth or sponge to gently wipe the outer surface to remove dust and dirt.
- Avoid using chemical cleaners or harsh solvents to prevent damage to the appearance.
- Inspect fittings (bolts, screws, nuts) every 3 months and re-tighten every 6 months.
- Avoid direct sunlight.
- If the product shows structural damage or poses a safety hazard, stop using it until repaired.
Contact Information
For customer support or if you are not entirely satisfied with your purchase, please contact us:
US: YAHEE TECHNOLOGIES CORP, 1532 S VINEYARD AVE ONTARIO CA 91761
UK: Monumart Limited, Europa House, Europa Way, IP15DL, Ipswich.
Manufacturer Information
Made in PRC for Yahee GmbH.
Yahee GmbH Höpfigheimer Straße 11, 74321 Bietigheim-Bissingen.
E-Mail: info@yaheetech.shop
You can also download the electronic Installation Manual from the Product guides and documents section of the advertising page.
