Yaheetech 51-Inch Cat Tree Assembly Instructions
Important Information
We recommend 1 or more people to install this product.
The expected assembly time is 1 hour.
Safety Warnings:
- Not intended for use by children.
- Keep away from fire or other heat sources.
- We recommend wearing protective gloves.
Please follow the instruction manuals and use a pad to avoid damage during assembly. Protect the product and the floor during installation.
Parts List
The following parts are included in the package:
- Part 1: Base Platform (x1)
- Part 2: Middle Platform (x1)
- Part 3: Ladder (x1)
- Part 4: Top Perch (x1)
- Part 5: Cylindrical Tunnel (x1)
- Part 6: Cube House (x1)
- Part 7: Support Posts (46cm) (x3)
- Part 8: Support Post (39cm) (x1)
- Part 9: Support Post (44cm) (x1)
- Part 10: Short Support Posts (27cm) (x4)
- Part 11: Hammock (x1)
- Part 12: Screws (M8*12mm) (x2)
- Part 13: Screws (M8*25mm) (x9)
- Part 14: Screws (M8*35mm) (x7)
- Part 15: Screw (M8*80mm) (x1)
- Part 16: Washer (x1)
- Part 17: Screws and Wall Anchors (x1 set)
- Part 18: Allen Wrench (x1)
Assembly Steps
Step 1: Attach the cube house (6) to the base platform (1) using screws (13) and washers (16). Insert screws (13) through the holes in the base platform and into the cube house. Use the Allen wrench (18) to tighten. Ensure the cube house is oriented correctly with the arched openings facing outwards.
Step 2: Attach three support posts (7) to the base platform (1) using screws (14). Insert screws (14) through the holes in the base platform and into the bottom of the support posts. Use the Allen wrench (18) to tighten.
Step 3: Attach the middle platform (2) to the top of the three support posts (7) using screws (12). Insert screws (12) through the holes in the middle platform and into the top of the support posts. Use the Allen wrench (18) to tighten.
Step 4: Attach the ladder (3) to the middle platform (2) using screws (12). Insert screws (12) through the holes in the ladder and into the middle platform. Use the Allen wrench (18) to tighten.
Step 5: Attach the remaining support posts (9, 8, and 10) to the structure. Attach the longer support post (9) to the middle platform (2) using screws (14). Attach the shorter support posts (10) to the middle platform (2) using screws (14). Attach the support post (8) to the cube house (6) using screws (13).
Step 6: Attach the hammock (11) to the designated points on the structure using the provided fasteners.
Step 7: Attach the top perch (4) to the top of the support post (9) using screws (13) and washers (16). Insert screws (13) through the holes in the top perch and into the top of the support post. Use the Allen wrench (18) to tighten.
Step 8: Secure the structure to the wall using the provided screws and wall anchors (17) for added stability, especially if the cat is very active. Follow the instructions for wall mounting carefully.
Customer Support
If you are not entirely satisfied with your purchase, please feel free to contact Yaheetech customer support:
- Go to Your Orders.
- Find your order in the list.
- Select "Problem with order".
- Choose your topic from the list displayed.
- Select "Contact seller".
You can also download the electronic Installation Manual from the "Product guides and documents" section of the advertising page.
