Yaheetech 592974 Cat Tree
Model Number: 592974
Introduction
Please read this instruction manual carefully before attempting to install the Yaheetech 592974 Cat Tree.
Important Information
- ??? Assembly Recommendation: 1 or more people.
- ⏰ Estimated Assembly Time: 1 hour.
- ?? Not intended for use by children.
- ?❌ Keep away from fire or other heat sources.
- ?✔️ We recommend wearing protective gloves during assembly.
Preparation: Follow the instruction manuals and use a pad or protective covering on your floor to avoid damage during assembly.
Diagram Description: The initial setup involves unpacking the carton. It is recommended to place the product components on a protective pad on the floor before assembly to prevent scratches.
Parts List
Identify all parts before beginning assembly:
- Part 1: Base Cube (x1)
- Part 2: Shelf (x2)
- Part 3: Shelf (x1)
- Part 4: Circular Platform (x1)
- Part 5: Short Pole (27CM) (x4)
- Part 6: Long Pole (38CM) (x2)
- Part 7: Long Pole (38CM) (x1)
- Part 8: Short Pole (38CM) (x2)
- Part 9: Top Cap (x1)
- Part 10: Decorative Top Piece (x1)
- Part A: Spring Mechanism (x1)
- Part B: Screw (x4)
- Part C: Screw (x1)
- Part D: Screw (x1)
- Part E: Screw (x8)
- Part F: Washer (x2)
- Part G: Washer (x2)
- Part H: Allen Wrench (x1)
- Part I: Bracket (x1)
- Part J: Wall Anchor & Screw (x1)
Assembly Instructions
Follow these steps carefully to assemble your cat tree:
Step 1: Base Assembly
Attach the base cube (Part 1) to the floor using eight screws (Part E). Secure two short poles (Part 5) vertically to the sides of the cube using screws (Part E).
Diagram Description: Shows the base cube with screws being inserted from the bottom and poles being attached to the sides.
Step 2: First Pole Attachment
Screw a long pole (Part 6) into the top center of the base cube using screw (Part D).
Diagram Description: Shows a long pole being screwed into the top of the base cube.
Step 3: First Shelf and Pole
Place a shelf (Part 2) onto the pole. Attach a short pole (Part 8) to the shelf using screw (Part B).
Diagram Description: Shows a shelf being placed on a pole, and a shorter pole being attached to the shelf.
Step 4: Second Shelf and Pole
Place another shelf (Part 2) onto the pole (Part 6). Attach a short pole (Part 6) to this shelf using screw (Part B).
Diagram Description: Shows a second shelf being placed on a pole, and another pole attached to it.
Step 5: Third Shelf and Pole
Place a shelf (Part 3) onto the pole (Part 8). Attach a short pole (Part 8) to this shelf using screw (Part B).
Diagram Description: Shows a third shelf being placed on a pole, and another pole attached to it.
Step 6: Circular Platform
Place a circular platform (Part 4) onto the pole (Part 7). Attach a short pole (Part 7) to this platform using screw (Part B).
Diagram Description: Shows a circular platform being placed on a pole, and another pole attached to it.
Step 7: Top Cap Assembly
Assemble the top cap (Part 9) with the spring mechanism (Part A), washers (Part F, Part G), and attach this assembly to the top of pole (Part 7).
Diagram Description: Shows the top cap, spring mechanism, and washers being assembled and then attached to the top pole.
Step 8: Final Top Piece
Place the decorative top piece (Part 10) onto the assembled structure.
Diagram Description: Shows the decorative top piece being placed on the very top of the cat tree.
Step 9: Height Adjustment
Adjust the height of the top section to fit securely between the floor and ceiling. Ensure a proper fit (✔️) and avoid an improper fit (❌).
Diagram Description: Illustrates adjusting the top section for ceiling height, showing correct and incorrect methods.
Step 10: Final Tightening
Note: Tighten all screws completely after assembly.
Diagram Description: Shows a hand tightening screws.
Step 11: Hanging Toy
Attach the hanging toy (fur ball) to the designated spot.
Important Note: Please remove the bell(s) on the hanging fur ball(s) if your cats tend to eat foreign objects.
Optional: A bracket (Part I) and wall anchor/screw (Part J) are provided, which may be used for additional stability or securing the unit.
Product Care Instructions
- Use a soft, clean cloth or sponge to gently wipe the outer surface of the product to remove dust and dirt.
- Avoid using chemical cleaners or harsh solvents to prevent damage to the appearance of the product.
- Inspect the fittings (bolts, screws, nuts, etc.) every 3 months and re-tighten them every 6 months.
- Avoid direct sunlight.
Safety Notice: If the product shows structural damage or poses a safety hazard, stop using it until it is repaired.
Customer Satisfaction & Contact
If you are not entirely satisfied with your purchase, please feel free to contact us by following the steps provided on the order page of your account.
Contact Information:
- USA: YAHEE TECHNOLOGIES CORP, Address: 1532 S VINEYARD AVE ONTARIO CA 91761
- UK: Monumart Limited, Address: Europa House, Europa Way, IP15DL, Ipswich.
- Importer (Germany): Yahee GmbH, Address: Höpfigheimer Straße 11, 74321 Bietigheim-Bissingen.
- France: Yahee SAS, Address: 6, Place de la Madeleine, 75008 Paris.
- Italy: Yahee SRL, Address: Via Generale Gustavo Fara, 26, 20124 Milano.
Download Manual
You can also download the electronic Installation Manual from the Product guides and documents section of the advertising page.
