Welcome
Thank you for choosing Aqua Dream, the smart solution to help your baby sleep. Please read this manual carefully before use.
What's Included
- An ocean atmosphere projector module
- A plush base for the module
- This instruction manual
Initial Use & Battery Installation
- Remove the projector module from the plush base.
- Unscrew the battery compartment cover.
- Insert 3 AA/LR6 batteries (not included), ensuring correct polarity (+ and -).
- Close and screw the cover back into place.
- Replace the module in the plush base, ensuring the elastic rim is properly inserted into the groove. For ease, start from the front and follow the groove around, gradually sliding the elastic border into place.
- Your projector is now ready for use.
Operating Your Aqua Dream
The projector features several controls:
- Button A (Main On/Off): Activates animated projections for 25 minutes, then stops automatically.
- Button B (Lullaby): Cycles through Lullaby 1, Lullaby 2, and then turns sound off. Each press follows the same cycle. (Automatic stop after 15 minutes).
- Button C (Background Sound): Cycles through ambient sounds: waves, white noise, heartbeat. (Automatic stop after 15 minutes).
- Button D (Brightness): Adjusts light intensity through 3 levels (30%, 60%, 100%).
- Button E (Volume): Adjusts sound level through 4 levels.
Projections and sounds operate independently. You can choose projections only, sound only, or both. Background sounds and lullabies cannot be activated simultaneously; for example, activating wave sounds while a lullaby plays will turn off the lullaby.
Pressing any button during operation resets the automatic timer for music (15 min) or projections (25 min).
Usage Tips
- To conserve battery power, use the lowest light intensity and sound level.
- For the best effect, place the projector approximately 1.5 meters (about 5 feet) from the ceiling.
Troubleshooting
If the projector experiences issues like reduced intensity or music problems, it may be due to weak batteries. Before contacting customer service, try using new, non-rechargeable batteries. Rechargeable batteries may not provide sufficient power over time.
Cleaning the Plush Base
Important: Before any cleaning, even superficial, remove the plastic projector module from the plush base.
We recommend hand washing or machine washing at 30°C (86°F). Do not tumble dry.
Guarantee Information
Please keep your proof of purchase, as it is essential for warranty claims.
Environmental Information
Batteries contain materials that are difficult to recycle. To protect the environment, please dispose of used batteries at designated collection points and not in household waste. Empty batteries must be removed from the projector.
Safety Precautions
- The projector module is designed for indoor use and is not water-resistant.
- Always use a clean, dry cloth to clean the unit.
- Do not charge non-rechargeable batteries.
- Batteries should only be changed by an adult.
- Do not mix different types of batteries or new and used batteries.
- Insert batteries according to polarity (+ and -).
- Do not short-circuit the power supply.
- This product is not a toy.
- In case of malfunction, do not attempt to disassemble the product. Opening the product will void the warranty.
Manufacturer & Contact
For assistance, please contact our customer service: www.pabobo.com.
Made in PRC.
Pabobo, 38 rue René Boulanger, 75010 PARIS.
Pabobo is a registered trademark. All rights and models reserved. Illustrations are non-binding.
Keep this manual for future reference. Keep packaging out of reach of children.
