Pabobo Aqua Dream Whale Projector

Introduction

Thank you for choosing Aqua Dream, the smart solution to help your child fall asleep. Please read this Instruction Manual carefully before use.

In the box, you will find:

• An ocean atmosphere projector module
• A plush base to house the module
• These instructions

Initial Use / Insert Batteries

1. Remove the module (projector) from the plush base.
2. Unscrew the battery compartment cover.
3. Insert 3 AA/LR6 batteries (not included), ensuring correct polarity.
4. Close and screw the cover back into place.
5. Replace the module in the plush base, making sure the elastic border is properly inserted into the rim. For easier insertion, start with the front and follow the rim around, gradually sliding the elastic border into place.
6. Your projector is now ready for use.

Operation (See Diagram)

The projector has several buttons to control its functions:

• Button A (Main Button - On/Off): Activates the animated projections for 25 minutes, after which it stops automatically.
• Button B (Lullaby Button): Press once for Lullaby 1, twice for Lullaby 2, and a third time to turn off the sound. Subsequent presses cycle through the same options. The sound stops automatically after 15 minutes.
• Button C (Background Sound Button): Press once to activate the first ambient sound (waves), twice for white noise, and a third time for heartbeats. The sound stops automatically after 15 minutes.

Key Features:

• Projections and sounds operate independently; you can choose projections only, sound only, or both.
• Background sounds and lullabies cannot be activated simultaneously. For example, if a lullaby is playing, activating the wave sound will turn off the lullaby.
• The automatic stop timer (for music and projections) resets with each button press. Music restarts with auto-stop after 15 minutes, and projections restart with auto-stop after 25 minutes.
• You can adjust light intensity (D) through 3 levels (30%, 60%, 100%) and sound level (E) through 4 levels by pressing the respective buttons.

Tip: To conserve battery power, it is recommended to use the lowest light intensity and sound level.

For the best projection effect, place the projector approximately 1.5 meters from the ceiling.

Troubleshooting

If the projector experiences issues such as reduced intensity or sound problems, it may be due to low battery power. Before contacting customer service, try installing new, non-rechargeable batteries. Do not use rechargeable batteries, as they may not provide sufficient power for the projector.

Cleaning the Plush Base

• Attention: Before any cleaning, even superficial, remove the plastic projector module from the plush base.
• Washing by hand or machine at 30°C is recommended.
• Warning: Do not tumble dry.

Guarantee

Please keep your proof of purchase, as it is required for warranty claims.

Environment

Batteries contain elements that are difficult to recycle. To protect the environment, please dispose of used batteries at designated collection points, not in household waste. Empty batteries must be removed from the projector.

Security Information

• The projector module is designed for indoor use only and is not water-resistant.
• Always use a clean, dry cloth to clean the device.
• Do not attempt to recharge non-rechargeable batteries.
• Batteries should only be changed by an adult.
• Do not mix different types of batteries or used and new batteries. Insert batteries according to polarity markings.
• Do not short-circuit the power supply.
• This product is not a toy.
• In case of malfunction, do not attempt to disassemble the product. Doing so will void the warranty. Contact customer service at www.pabobo.com.