Aqua Dream Ocean Projector

Thank you for choosing Aqua Dream, the smart solution to getting baby to sleep. Please read this Instruction Manual carefully before use. In the box you will find:

• An ocean atmosphere projector module
• A plush base for the module
• These instructions

Initial Use / Insert Batteries

1. Remove the module (projector) from the plush base.
2. Unscrew the battery compartment cover.
3. Insert 3 AA/LR6 batteries (not included), ensuring correct polarity.
4. Close and screw the cover back into place.
5. Replace the module in the plush base, making sure the elastic rim is properly inserted all around. For ease, start at the front and follow the rim around, gradually sliding the elastic border into place.
6. Your projector is ready for use – sleepy time!

Use

The projector features several controls:

• A. Main button (on-off): Activates animated projections for 25 minutes, then stops automatically.
• B. Lullaby button: Press once for Lullaby 1, twice for Lullaby 2, and a third time to turn off the sound. Subsequent presses cycle through the options. (Auto-stop after 15 minutes).
• C. Background sound button: Press once for the first ambient sound (waves), twice for white noise, and a third time for heart beat. (Auto-stop after 15 minutes).
• D. Brightness adjustment: Adjusts light intensity through 3 levels (30%, 60%, 100%).
• E. Sound level adjustment: Adjusts sound volume through 4 levels.

Projections and sounds operate independently. You can select projections only, sound only, or both projections and sound.

White noise and lullabies cannot be activated together. For instance, if a lullaby is playing, activating the wave sound will disable the lullaby.

The automatic stop timer resets with each button press. Any press during operation restarts the music (auto-stop after 15 min) or projections (auto-stop after 25 min).

Tip: To conserve battery life, use the lowest light intensity and sound level.

For optimal effect, place the projector approximately 1.5 meters from the ceiling.

Troubleshooting

If batteries weaken, the projector may malfunction (e.g., loss of intensity, music issues). Before contacting customer service, test with new, non-rechargeable batteries. Do not use rechargeable batteries, as they may lack sufficient power over time.

Cleaning the Plush Base

• Attention: Before cleaning (even superficially), remove the plastic module (projector) from the plush base.
• We recommend hand washing or machine washing at 30°C.
• Warning: Do not tumble dry.

Guarantee

Keep your proof of purchase, as it is essential for warranty claims.

Environment

Batteries contain elements that are difficult to recycle. To protect the environment, dispose of them at designated collection points, not in household waste. Remove empty batteries from the projector.

Security Information

The projector module is designed for indoor use and is not water-resistant. Always clean the unit with a clean, dry cloth.

Do not charge non-rechargeable batteries. Batteries must be changed only by an adult. Do not mix different or used batteries. Insert batteries according to polarity (+ and –). Do not short-circuit the power supply.

If the product malfunctions, do not attempt to disassemble it. Opening the product will void the warranty. Contact customer service: www.pabobo.com.

Manufacturer & Other Information

Made in PRC

Pabobo, 38 rue René Boulanger, 75010 PARIS

Pabobo is a registered trademark. All rights and models reserved. Illustrations are approximate and non-binding.

Keep this manual for future reference. Keep packaging out of reach of children.

In environments with electrostatic discharge, the product may temporarily turn off (EUT may not operate correctly). Normal operation will resume after pressing the button again.