Schneider Electric Altivar Process ATV630D18Y6 Variable Speed Drive
Product Type: Variable Speed Drive
Model: ATV630D18Y6
Power Rating: 18.5 kW / 25 hp
Supply Voltage: 500 to 690 V
Main Specifications
Attribute | Value |
---|---|
Range of Product | Altivar Process ATV600 |
Product Specific Application | Process and utilities |
Product or Component Type | Variable speed drive |
Variant | Standard version |
Device short name | ATV630 |
Mounting Mode | Wall mount |
Communication Port Protocol | Ethernet, Modbus serial, Modbus TCP |
[Us] rated supply voltage | 500...690 V - 15...10% |
Relative symmetric mains voltage tolerance | 10% |
Relative symmetric network frequency tolerance | 5% |
Nominal output current | 24.0 A |
IP degree of protection | IP21 (EMC filter integrated), IP00 (IEC 61800-5-1), IP00 (IEC 60529), IP20 with kit VW3A9705 |
Product destination | Asynchronous motors, Synchronous motors |
EMC filter | Integrated 82.02 ft (25 m) IEC 61800-3 category C3 |
Type of cooling | Forced convection |
Supply frequency | 50...60 Hz - 5...5% |
Motor power kW | 15 kW (500 V normal duty), 11 kW (500 V heavy duty), 18.5 kW (690 V normal duty), 15 kW (690 V heavy duty) |
Maximum Horse Power Rating | 20 hp (500 V normal duty), 15 hp (500 V heavy duty), 25 hp (690 V normal duty), 20 hp (690 V heavy duty) |
Line current | 23.1 A (500 V normal duty), 23 A (690 V normal duty), 18.4 A (500 V heavy duty), 19.2 A (690 V heavy duty) |
Continuous output current | 18 A (4 kHz heavy duty), 24 A (4 kHz normal duty) |
Complementary Specifications
Attribute | Value |
---|---|
Speed drive output frequency | 0.1...500 Hz |
Safety function | STO (safe torque off) SIL 3 |
Option card slots | Slot A communication modules (Profibus DP V1, PROFINET, DeviceNet, Modbus TCP/EtherNet/IP, CANopen, Ethernet IP/Modbus TCP/MD-Link, Ethernet Powerlink), Slot A/slot B digital and analog I/O extension module, Slot A/slot B output relay extension module |
Discrete input number | 8 |
Discrete input type | DI1...DI8 programmable as pulse input (0...30 kHz, 24 V DC <= 30 V) |
Discrete input logic | 16 preset speeds; Positive logic (source) DI1...DI8), < 5 V, > 11 V; Negative logic (sink) DI1...DI8), > 16 V, < 10 V |
Discrete output number | 0 |
Discrete output type | Relay outputs R1A, R1B, R1C (250 V AC 3000 mA, 30 V DC 3000 mA); Relay outputs R2A, R2C (250 V AC 5000 mA, 30 V DC 5000 mA); Relay outputs R3A, R3C (250 V AC 5000 mA, 30 V DC 5000 mA) |
Analogue input number | 3 |
Analogue input type | Al1, Al2, Al3 software-configurable voltage (0...10 V DC, -10...10 V DC); Al1, Al2, Al3 software-configurable current (0...20 mA) |
Analogue output number | 2 |
Analogue output type | Software-configurable voltage (AQ1, AQ2 0...10 V DC); Software-configurable current (AQ1, AQ2 0...20 mA); Software-configurable current (DQ-, DQ+ 30 V DC, 100 mA) |
Relay output number | 3 |
Relay output type | Configurable relay logic R1 fault relay (NO/NC 100000 cycles); R2 sequence relay (NO 100000 cycles); R3 sequence relay (NO 100000 cycles) |
Maximum switching current | 3 A (resistive, cos phi = 1) for R1, R2, R3; 2 A (inductive, cos phi = 0.4, 7 ms) for R1, R2, R3 |
Minimum switching current | 5 mA 24 V DC for R1, R2, R3 |
Phase | 3 phase |
Physical interface | Ethernet, 2-wire RS 485 |
Method of access | Slave Modbus TCP |
Transmission Rate | 10, 100 Mbits |
Transmission frame | RTU |
Output voltage | <= power supply voltage |
Permissible temporary current boost | 1.1 x In (60 s normal duty), 1.5 x In (60 s heavy duty) |
Data format | 8 bits, configurable odd, even or no parity |
Electrical Connection & Details
Attribute | Value |
---|---|
Type of polarization | No impedance |
Frequency resolution | Display unit 0.1 Hz, Analog input 0.012/50 Hz |
Electrical connection | Control removable screw terminals (0.5...1.5 mm² AWG 20...AWG 16), Motor screw terminal (6...10 mm² AWG 10...AWG 8), Line side screw terminal (6...10 mm² AWG 10...AWG 8) |
Connector type | RJ45 on the remote graphic terminal (Ethernet/Modbus TCP, Modbus serial) |
Exchange mode | Half duplex, full duplex, autonegotiation (Ethernet/Modbus TCP) |
Number of addresses | 1...247 (Modbus serial) |
Supply | External supply for digital inputs (24 V DC, 19...30 V), <1.25 mA overload and short-circuit protection; Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5%, <10 mA overload and short-circuit protection; Internal supply for digital inputs and STO (24 V DC, 21...27 V), <200 mA overload and short-circuit protection |
Local signalling | 3 LEDs for local diagnostic; 3 LEDs (dual colour) for embedded communication status; 4 LEDs (dual colour) for communication module status; 1 LED (red) for presence of voltage |
Input compatibility | DI1...DI6 discrete input level 1 (PLC IEC 61131-2, IEC 65A-68); STOA, STOB discrete input level 1 (PLC IEC 61131-2) |
Discrete input logic | Positive logic (source) DI1...DI8), < 5 V, > 11 V; Negative logic (sink) DI1...DI8), > 16 V, < 10 V |
Sampling duration | 2 ms +/- 0.5 ms (DI1...DI4); 5 ms +/- 1 ms (DI5, DI6); 5 ms +/- 0.1 ms (Al1, Al2, Al3) |
Accuracy | +/- 0.6% (Al1, Al2, Al3) for temperature variation 60 °C (analog input); +/-1% (AO1, AO2) for temperature variation 60 °C (analog output) |
Linearity error | Al1, Al2, Al3 +/- 0.15% of maximum value (analog input); AO1, AO2 +/- 0.2% (analog output) |
Refresh time | Relay output R1, R2, R3) 5 ms +/- 0.5 ms |
Isolation | Between power and control terminals |
Enclosure mounting | Wall mounted |
4 quadrant operation possible | False |
Asynchronous motor control profile | Optimized torque mode, Variable torque standard, Constant torque standard |
Synchronous motor control profile | Permanent magnet motor, Synchronous reluctance motor |
Maximum output frequency | 500 kHz |
Acceleration and deceleration ramps | Linear adjustable separately from 0.01...9999 s, S, U or customized |
Motor slip compensation | Adjustable; Not available in permanent magnet motor law; Can be suppressed; Automatic whatever the load |
Switching frequency | 2...8 kHz adjustable; 4...8 kHz with derating factor |
Nominal switching frequency | 4 kHz |
Braking to standstill | By DC injection |
Brake chopper integrated | False |
Performance and Electrical Data
Attribute | Value |
---|---|
Maximum Input Current per Phase | 23.1 A |
Maximum output voltage | 690.0 V |
Apparent power | 27.5 kVA (690 V normal duty), 22.9 kVA (690 V heavy duty) |
Maximum transient current | 27 A (60 s heavy duty), 26.4 A (60 s normal duty) |
Network Frequency | 50-60 Hz |
Prospective line Isc | 70 kA |
Base load current at high overload | 18.0 A |
Base load current at low overload | 24.0 A |
Power dissipation in W | Natural convection 124 W (500 V, 4 kHz); Forced convection 376 W (500 V, 4 kHz) |
With safety function Safely Limited Speed (SLS) | False |
With safety function Safe brake management (SBC/SBT) | False |
With safety function Safe Operating Stop (SOS) | False |
With safety function Safe Position (SP) | False |
With safety function Safe programmable logic | False |
With safety function Safe Speed Monitor (SSM) | False |
With safety function Safe Stop 1 (SS1) | False |
With sft fct Safe Stop 2 (SS2) | False |
With safety function Safe torque off (STO) | True |
With safety function Safely Limited Position (SLP) | False |
With safety function Safe Direction (SDI) | False |
Protection type | Thermal protection motor, Safe torque off motor, Motor phase break motor, Thermal protection drive, Safe torque off drive, Overheating drive, Overcurrent between output phases and earth drive, Overload of output voltage drive, Short-circuit protection drive, Motor phase break drive, Overvoltages on the DC bus drive, Line supply overvoltage drive, Line supply undervoltage drive, Line supply phase loss drive, Overspeed drive, Break on the control circuit drive |
Dimensions
Diagram: Drives without Top Cover
Includes Front View with EMC Plate, Front View without EMC Plate, Left View, and Rear View.
Key dimensions:
- Height: 542 mm (21.34 in)
- Width: 246 mm (9.68 in)
- Depth: 242 mm (9.53 in)
Diagram: Drives with IP20 Top Cover
Includes Front View, Left View, and Rear View.
Key dimensions:
- Height: 562 mm (22.13 in)
- Width: 246 mm (9.68 in)
- Depth: 242 mm (9.53 in)
Additional dimensions shown in diagrams include 206 mm (8.11 in) and 403 mm (15.9 in) for specific views.
Mounting and Clearance
Diagram: Clearances
Shows required clearances around the drive for proper ventilation and operation.
- X1 (Front clearance): ≥ 100 mm (3.94 in.)
- X2 (Side clearance): ≥ 100 mm (3.94 in.)
- X3 (Rear clearance): ≥ 10 mm (0.39 in.)
Diagrams: Mounting Types
Illustrates different mounting configurations:
- Mounting Type A: Individual IP21 - Standard individual mounting.
- Mounting Type B: Side by Side IP20 - Units mounted adjacent to each other.
- Mounting Type C: Individual IP20 - Standard individual mounting.
The diagrams show spacing requirements labeled 'a', indicating 'a ≥ 0'.
Connections and Schematics
Three-Phase Power Supply with Upstream Breaking via Line Contactor
Connection diagram conforming to standards EN 954-1 category 1 and IEC/EN 61508 capacity SIL1, stopping category 0 in accordance with standard IEC/EN 60204-1. The diagram illustrates the power supply connection through a line contactor (KM1), circuit breakers (Q2, Q3), pushbuttons (S1, S2), and a transformer (T1) for the control part. It notes that a line choke may be used and that relay R1 can be set to the 'Fault' state to switch off the product.
Three-Phase Power Supply with Downstream Breaking via Contactor
Similar to upstream breaking, this diagram shows the power supply connection with downstream breaking via a contactor (KM1). It also includes circuit breakers, pushbuttons, and a transformer, with similar notes regarding line chokes and the use of relay R1 for fault indication.
Control Block Wiring Diagram
This diagram details the internal wiring of the control block, showing connections for Safe Torque Off (STO), Analog Output (AQ1, AQ2), Digital Inputs (DI1-DI8), Reference potentiometer, Analog Input (Al1-Al3), and COM terminals. It also indicates the function of relays R1A/R1B/R1C (Fault relay), R2A/R2C (Sequence relay), and R3A/R3C (Sequence relay). A 'Sensor Connection' note mentions the possibility of connecting one or three sensors on terminals Al2 or Al3.
Sink / Source Switch Configuration
This section explains the Sink/Source switch used to adapt logic input operation to programmable controller outputs. It specifies setting the switch to 'Source' for PLC outputs with PNP transistors and to 'Ext' for PLC outputs with NPN transistors. Diagrams illustrate:
- Switch Set to SRC (Source) Position Using the Output Power Supply for the Digital Inputs.
- Switch Set to SRC (Source) Position and Use of an External Power Supply for the DIs.
- Switch Set to SK (Sink) Position Using the Output Power Supply for the Digital Inputs.
- Switch Set to EXT Position Using an External Power Supply for the DIs.
Performance Curves
Derating Curves
The derating curves illustrate the drive's performance (In = Nominal Drive Current) at different switching frequencies (0 kHz, 4 kHz, 6 kHz) and ambient temperatures. The curves show derating factors for:
- 40 °C (104 °F) - Mounting type A, B, and C
- 50 °C (122 °F) - Mounting type A, B, and C
- 60 °C (140 °F) - Mounting type B and C
SF denotes Switching Frequency.
Environmental Data
Attribute | Value |
---|---|
Environmental footprint (Carbon footprint) | 7228 (kg CO2 eq, Total Life cycle) |
Packaging made with recycled cardboard | Yes |
Packaging without single use plastic | No |
EU RoHS Directive | Pro-active compliance (Product out of EU RoHS legal scope) |
SCIP Number | 075941f9-bf60-4e63-ae5c-6fe3c8035357 |
REACH Regulation | REACH Declaration |
California proposition 65 | WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
Product contributes to saved and avoided emissions | Yes |
Take-back | No |
WEEE | The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins. |
Ordering and Shipping Details
Attribute | Value |
---|---|
Category | US1CP4E22276 |
Discount Schedule | CP4E |
GTIN | 3606481325167 |
Returnability | Yes |
Packing Units
Attribute | Value |
---|---|
Unit Type of Package 1 | PCE |
Number of Units in Package 1 | 1 |
Package 1 Height | 29.53 in (75.000 cm) |
Package 1 Width | 23.62 in (60.000 cm) |
Package 1 Length | 31.50 in (80.000 cm) |
Package 1 Weight | 46.297 lb(US) (21.000 kg) |
Related Documents
![]() |
Schneider Electric Altivar Process ATV630 Variable Speed Drive - 2.2kW, 3hp, 500-690V, IP00 Detailed product data sheet for the Schneider Electric Altivar Process ATV630 variable speed drive. Includes specifications, electrical data, environmental information, dimensions, mounting types, connection diagrams, and performance curves for the ATV630U22Y6 model. |
![]() |
Schneider Electric Altivar Process ATV630 Variable Speed Drive (ATV630C25N4) - Product Data Sheet Detailed specifications, features, dimensions, and environmental data for the Schneider Electric Altivar Process ATV600 and ATV630 variable speed drives, including model ATV630C25N4. Covers electrical connections, mounting, safety functions, performance curves, and environmental compliance. |
![]() |
Schneider Electric Altivar Machine ATV320 Variable Speed Drive - 0.18kW Technical data sheet for the Schneider Electric Altivar Machine ATV320 variable speed drive. This compact 0.18kW, 200-240V, 1-phase drive is designed for complex applications and offers various communication options, safety features, and environmental specifications. |
![]() |
Schneider Electric Altivar Process ATV630D11Y6 Variable Speed Drive - Technical Data Detailed technical specifications, dimensions, electrical connections, and environmental data for the Schneider Electric Altivar Process ATV630D11Y6 variable speed drive. |
![]() |
Schneider Electric Altivar Process ATV630 Variable Speed Drive - Product Data Sheet Detailed technical specifications, dimensions, environmental data, and connection diagrams for the Schneider Electric Altivar Process ATV630 variable speed drive, including models ATV600, ATV630, 55kW, 75hp, 500-690V, IP00. |
![]() |
Schneider Electric Altivar Process ATV630D18N4 Variable Speed Drive - Technical Data Detailed technical specifications for the Schneider Electric Altivar Process ATV630D18N4 variable speed drive, including electrical, environmental, and performance data. This 18.5kW (25hp) drive operates at 380-480V with IP21 protection and UL Type 1 rating. |
![]() |
Schneider Electric Altivar Machine ATV320 Variable Speed Drive - 3kW, 380-500V Detailed product data sheet for the Schneider Electric Altivar Machine ATV320 variable speed drive. Includes specifications, dimensions, electrical data, environmental information, and performance curves for the 3kW, 380-500V, 3-phase model. |
![]() |
Schneider Electric Altivar Machine ATV320 Variable Speed Drive - 0.75kW, 200-240V, 1 Phase Detailed product data sheet for the Schneider Electric Altivar Machine ATV320 variable speed drive. This document provides comprehensive specifications, technical data, dimensions, and connection diagrams for the 0.75kW, 200-240V, 1-phase enclosed drive, model ATV320U07M2W. |