Schneider Electric Altivar Machine ATV320 Variable Speed Drive
Product Data Sheet
Specifications
Product Name: Altivar Machine ATV320, 0.18kW, 200 to 240V, 1 phase, compact
Product Reference: ATV320U02M2C
Product Availability: Stock - Normally stocked in distribution facility
Main
| Range of Product | Altivar Machine ATV320 |
|---|---|
| Product or Component Type | Variable speed drive |
| Product Specific Application | Complex machines |
| Variant | Standard version |
| Format of the drive | Compact |
| Mounting Mode | Wall mount |
| Communication Port Protocol | Modbus serial, CANopen |
| Option card |
|
| [Us] rated supply voltage | 200...240 V - 15...10% |
| Nominal output current | 1.5 A |
| Motor power kW | 0.18 kW (heavy duty) |
| EMC filter | Class C2 EMC filter integrated |
| IP degree of protection | IP20 |
Complementary
| Attribute | Value |
|---|---|
| Discrete input number | 7 |
| Discrete input type | STO safe torque off, 24 V DC (1.5 kOhm); DI1...DI6 logic inputs, 24 V DC (30 V); D15 programmable as pulse input 0...30 kHz, 24 V DC (30 V) |
| Discrete input logic | Positive logic (source), Negative logic (sink) |
| Discrete output number | 3 |
| Discrete output type | Open collector DQ+ 0...1 kHz (30 V DC, 100 mA); Open collector DQ- 0...1 kHz (30 V DC, 100 mA) |
| Analogue input number | 3 |
| Analogue input type | Al1 voltage 0...10 V DC (30 kOhm, 10 bits); Al2 bipolar differential voltage +/- 10 V DC (30 kOhm, 10 bits); Al3 current 0...20 mA (or 4-20 mA, x-20 mA, 20-x mA or other patterns by configuration) (250 Ohm, 10 bits) |
| Analogue output number | 1 |
| Analogue output type | Software-configurable current AQ1 0...20 mA (800 Ohm, 10 bits); Software-configurable voltage AQ1 0...10 V DC (470 Ohm, 10 bits) |
| Relay output type | Configurable relay logic R1A (1 NO, 100000 cycles); Configurable relay logic R1B (1 NC, 100000 cycles); Configurable relay logic R1C; Configurable relay logic R2A (1 NO, 100000 cycles); Configurable relay logic R2C |
| Maximum switching current | Relay output R1A, R1B, R1C resistive, cos phi = 1: 3 A 250 V AC; Relay output R1A, R1B, R1C resistive, cos phi = 1: 3 A 30 V DC; Relay output R1A, R1B, R1C, R2A, R2C inductive, cos phi = 0.4, 7 ms: 2 A 250 V AC; Relay output R1A, R1B, R1C, R2A, R2C inductive, cos phi = 0.4, 7 ms: 2 A 30 V DC; Relay output R2A, R2C resistive, cos phi = 1: 5 A 250 V AC; Relay output R2A, R2C resistive, cos phi = 1: 5 A 30 V DC; Relay output R1A, R1B, R1C, R2A, R2C: 5 mA 24 V DC |
| Minimum switching current | Relay output R1A, R1B, R1C, R2A, R2C: 5 mA 24 V DC |
| Method of access | Slave CANopen |
| 4 quadrant operation possible | True |
| Asynchronous motor control profile |
|
| Synchronous motor control profile | Vector control without sensor |
| Maximum output frequency | 0.599 kHz |
| Acceleration and deceleration ramps |
|
| Motor slip compensation | Automatic whatever the load, Adjustable 0...300% |
| Switching frequency | 2...16 kHz adjustable, 4...16 kHz with derating factor |
| Nominal switching frequency | 4 kHz |
| Braking to standstill | By DC injection |
| Brake chopper integrated | True |
| Line current | 3.4 A (200 V heavy duty), 2.8 A (240 V heavy duty) |
| Maximum Input Current per Phase | 3.4 A |
| Maximum output voltage | 240 V |
| Apparent power | 0.7 kVA (240 V heavy duty) |
| Network Frequency | 50-60 Hz |
| Relative symmetric network frequency tolerance | 5% |
| Prospective line Isc | 1 kA |
| Base load current at high overload | 6.9 A |
| Power dissipation in W | Self-cooled 17.0 W (200 V, 4 kHz) |
| With safety function Safely Limited Speed (SLS) | True |
| With safety function Safe brake management (SBC/SBT) | False |
| With safety function Safe Operating Stop (SOS) | False |
| With safety function Safe Position (SP) | False |
| With safety function Safe programmable logic | False |
| With safety function Safe Speed Monitor (SSM) | False |
| With safety function Safe Stop 1 (SS1) | True |
| With sft fct Safe Stop 2 (SS2) | False |
| With safety function Safe torque off (STO) | True |
| With safety function Safely Limited Position (SLP) | False |
| With safety function Safe Direction (SDI) | False |
| Protection type |
|
| Width | 2.8 in (72.0 mm) |
| Height | 5.6 in (143.0 mm) |
| Depth | 4.3 in (109.0 mm) |
| Net Weight | 1.8 lb(US) (0.8 kg) |
| Transient overtorque | 170...200 % of nominal motor torque |
Environment
| Attribute | Value |
|---|---|
| Operating position | Vertical +/- 10 degree |
| Product Certifications |
|
| Marking |
|
| Standards | IEC 61800-5-1 |
| Electromagnetic compatibility |
|
| Environmental class (during operation) | Class 3C3 according to IEC 60721-3-3 |
| Maximum acceleration under shock impact (during operation) | 150 m/s² at 11 ms |
| Maximum acceleration under vibrational stress (during operation) | 10 m/s² at 13...200 Hz |
| Maximum deflection under vibratory load (during operation) | 1.5 mm at 2...13 Hz |
| Permitted relative humidity (during operation) | Class 3K5 according to EN 60721-3 |
| Overvoltage category | III |
| Regulation loop | Adjustable PID regulator |
| Speed accuracy | +/- 10% of nominal slip (0.2 Tn to Tn) |
| Pollution degree | 2 |
| Ambient air transport temperature | -13...158 °F (-25...70 °C) |
| Ambient air temperature for operation | 14...122 °F (-10...50 °C) without derating; 122...140 °F (50...60 °C) with derating factor |
| Ambient Air Temperature for Storage | -13...158 °F (-25...70 °C) |
Ordering and shipping details
| Attribute | Value |
|---|---|
| Category | US1CP4B22152 |
| Discount Schedule | CP4B |
| GTIN | 3606480966514 |
| Returnability | Yes |
| Country of origin | ID |
Packing Units
Package 1
| Attribute | Value |
|---|---|
| Unit Type of Package | PCE |
| Number of Units in Package | 1 |
| Package Height | 4.53 in (11.500 cm) |
| Package 1 Width | 7.28 in (18.500 cm) |
| Package 1 Length | 7.48 in (19.000 cm) |
| Package 1 Weight | 2.341 lb(US) (1.062 kg) |
Package 2
| Attribute | Value |
|---|---|
| Unit Type of Package | S06 |
| Number of Units in Package | 45 |
| Package 2 Height | 29.53 in (75.000 cm) |
| Package 2 Width | 23.62 in (60.000 cm) |
| Package 2 Length | 31.50 in (80.000 cm) |
| Package 2 Weight | 131.241 lb(US) (59.530 kg) |
Environmental Data
Schneider Electric aims to achieve Net Zero status by 2050 through supply chain partnerships, lower impact materials, and circularity via its ongoing "Use Better, Use Longer, Use Again" campaign to extend product lifetimes and recyclability.
Environmental footprint
| Attribute | Value |
|---|---|
| Carbon footprint (kg CO2 eq, Total Life cycle) | 661 |
| Environmental Disclosure | Product Environmental Profile |
Materials and Substances
| Attribute | Value |
|---|---|
| Packaging made with recycled cardboard | Yes |
| Packaging without single use plastic | Yes |
| EU RoHS Directive | Pro-active compliance (Product out of EU RoHS legal scope) |
| SCIP Number | Ee3fa745-edfd-40de-8348-1343b8a1770b |
| REACH Regulation | REACH Declaration |
| California proposition 65 | WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
Energy efficiency
| Attribute | Value |
|---|---|
| Product contributes to saved and avoided emissions | Yes |
Use Again
| Attribute | Value |
|---|---|
| Repack and remanufacture | Circularity Profile |
| Take-back | No |
| WEEE | The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins. |
Dimensions Drawings
Dimensions
Right View, Front View and Front View with EMC Plate
A textual description of the diagram showing the dimensions of the drive unit. The diagram displays measurements in both millimeters (mm) and inches (in.) for width, height, and depth, along with mounting hole details.
Diagram Description:
- Overall Dimensions: Width: 72.0 mm (2.83 in), Height: 143.0 mm (5.63 in), Depth: 109.0 mm (4.3 in)
- Front View Details: Shows the front panel with control buttons and display. Mounting holes are indicated as 4 x Ø5 (4 x Ø0.2 in).
- Side View Details: Shows the side profile of the drive.
- Front View with EMC Plate: Shows the drive with an EMC plate attached, indicating dimensions and mounting hole locations.
Mounting and Clearance
Mounting Types
Mounting Type A: Individual with Ventilation Cover
A diagram illustrating mounting type A, showing the drive installed individually with its ventilation cover. It indicates a minimum clearance of 50 mm (2 in.) on the top and bottom for ventilation.
Note: Only possible at ambient temperature less or equal to 50 °C (122 °F).
Mounting Type B: Side by Side, Ventilation Cover Removed
A diagram illustrating mounting type B, showing drives installed side-by-side with their ventilation covers removed. This configuration requires specific clearances as indicated in the diagram.
Mounting Type C: Individual, Ventilation Cover Removed
A diagram illustrating mounting type C, showing the drive installed individually with its ventilation cover removed. It indicates a minimum clearance of 50 mm (2 in.) on the top and bottom for ventilation.
Note: For operation at ambient temperature above 50 °C (122 °F).
Connections and Schema
Connection Diagrams
Single or Three-phase Power Supply - Diagram With Line Contactor
A wiring diagram showing a single or three-phase power supply connected to the ATV320 drive via a line contactor (KM1). It includes connections for power input (L1, L2, L3), motor output (U, V, W), and control signals. Notes indicate the use of a line choke (if used) and the function of relay output R1 to switch off the product in case of fault.
Single or Three-phase Power Supply - Diagram With Downstream Contactor
A wiring diagram showing a single or three-phase power supply connected to the ATV320 drive via a downstream contactor (KM2). It includes connections for power input (L1, L2, L3), motor output (U, V, W), and control signals. Notes indicate the use of a line choke (if used) and the function of relay output R1 to switch off the product in case of fault.
Control Block Wiring Diagram
A detailed wiring diagram for the control block of the ATV320 drive. It illustrates connections for analog output (AQ1), analog inputs (AI1, AI2, AI3), digital inputs (DI1-DI6), and communication ports (COM, COM). It also shows connections for external power supplies and potentiometers. Notes provide details on analog output, analog inputs, potentiometer usage, and digital input shielding instructions.
Digital Inputs Wiring
Switch Set to SRC (Source) Position Using the Output Power Supply for the Digital Inputs
Diagram showing digital inputs configured for source mode using the drive's internal power supply.
Switch Set to SRC (Source) Position and Use of an External Power Supply for the Digital Inputs
Diagram showing digital inputs configured for source mode using an external power supply.
Switch Set to SK (Sink) Position Using the Output Power Supply for the Digital Inputs
Diagram showing digital inputs configured for sink mode using the drive's internal power supply.
Switch Set to EXT Position Using an External Power Supply for the Digital Inputs
Diagram showing digital inputs configured for sink mode using an external power supply.
NOTE:
- STO input is also connected by default on a 24 Vdc terminal. If the external power supply is switched off, the function STO will be triggered.
- To avoid triggering the STO function when switching-on the product, the external power supply must be previously switched on.
Performance Curves
Derating Curves
A graph illustrating derating curves for the Altivar Machine ATV320 drive. The graph shows the relationship between switching frequency (kHz) on the x-axis and the percentage of nominal drive current (Mn) on the y-axis. Different curves represent different ambient temperatures and mounting types:
- 40 °C (104 °F) - Mounting type A, B and C
- 50 °C (122 °F) - Mounting type C
- 60 °C (140 °F) - Mounting type C
In: Nominal Drive Current
SF: Switching Frequency
Technical Illustration
Dimensions
A textual description of the diagrams showing the dimensions of the drive unit. The diagrams display measurements in both millimeters (mm) and inches (in.) for width, height, and depth, along with mounting hole details.
Diagram Description:
- Dimensions without EMC Plate: Shows the overall dimensions and mounting hole locations.
- Dimensions with EMC Plate: Shows the drive with an EMC plate attached, indicating dimensions and mounting hole locations.
Image of product / Alternate images
Alternative
Images of the Altivar Machine ATV320 drive, showing different views and details of the product, including the front panel with controls and safety warnings.
