ALLPOWERS R1500 Portable Power Station User Manual

The products and materials described in this manual are subject to change at any time due to technical upgrades. The company reserves the right to change and explain the content of the manual.

1. Safety Instructions

This product is a power station battery. Ensure you follow basic precautions, including:

1. Ensure the product is operated in a dry and well-ventilated area. If it gets wet, dry it thoroughly before use.
2. To reduce the risk of injury, close supervision is necessary when using this product near children.
3. Do not insert your fingers into the product, as this may cause electric shock or other dangers.
4. Do not touch the AC interface with metal, as this may cause electric shock, fire, or other dangers.
5. During charging or use, do not block the product's vents, as this may cause permanent damage to the product.
6. Please do not expose the product to rain and snow.
7. It is prohibited to use this product in an environment with strong static electricity or a strong magnetic field.
8. Please use the cable specially designed for the product. The company assumes no responsibility for damage caused by third-party equipment.
9. Do not disassemble the product at will. If this product requires service or maintenance, please find a qualified repairer.
10. Misuse, dropping, or excessive force can damage the product.
11. When disposing of used batteries, please separate batteries of different electrochemical systems.
12. In case of fire, a dry powder extinguisher can be used or it can be submerged in water.
13. Ensure the product is kept away from fire and heat sources.

2. Specifications

General Information

• Net Weight: Approximately 16.7 kg (36.8 lbs)
• Dimensions: 413 * 312 * 265 mm (16.25 * 12.28 * 10.43 inches)
• Battery Capacity: 1152Wh (48V = 24AH)
• Wi-Fi: Supported
• Bluetooth: Supported
• UPS (Uninterruptible Power Supply): Supported

Input Ports

• AC Input: (100 ~ 120)V ~ 15A Max, (220 ~ 240)V ~ 6.8A Max
• Solar Input: (12 ~ 60)V 13A, 650W Max
• Car Charger Input: 12V / 24V DC

Output Ports

• AC Output * 4: 100-120V / 220-240V 1800W MAX (Surge 3000W)
• USB-A * 2: 5V 3A, 9V 2A, 12V 1.5A, 36W Max
• USB-C * 2: 5/9/12/15V 3A, 20V 5A, 200W Max
• Car Port: 12V 10A, 120W Max
• Wireless Charger * 2: 30W Max

Battery Information

• Battery Type: Lithium Iron Phosphate LFP
• Protection Type: High temperature protection, low temperature protection, discharge protection, charging protection, overload protection, short-circuit protection, overcurrent protection.

Environmental Operating Temperature

• Charging Temperature: 0°C ~ 40°C (32°F ~ 104°F)
• Discharging Temperature: -10°C ~ 40°C (14°F ~ 104°F)
• Storage Temperature: -20°C ~ 40°C (-4°F ~ 104°F) *Recommendation: 20°C ~ 30°C
• Operating Humidity Range: 10% - 90%

Certification

CE, FCC, RoHS, IC, [Recycling Symbol] [Battery Symbol]

3. User Guide

3.1 Product Appearance Introduction

The power station features a robust design with various ports and indicators:

• Front Panel: Includes USB-A outputs (x2), USB-C outputs (x2), AC Input, Solar/Car Input, DC On/Off button, Power On/Off button, AC On/Off button, and Extra Battery Connector (x2). An LCD display shows operational status. It also has an overload protector.
• Side Panels: Feature vents for cooling.
• Top Panel: Houses the LCD display, Car Port Output, and Wireless Charger pads (x2).

3.2 Display Icon Introduction (Touch)

The LCD display shows various status icons:

3.3 AC Charging

The R1500 supports AP-Power fast charging technology with adjustable modes: standard, fast, or mute. The default setting is mute mode, with a charging power of 400W. The fast charging mode can reach 1000W. The charging power can be adjusted via the app. Refer to section 3.7 for app operation details.

If the AC input current exceeds 20A (100-120V) or 15A (220-240V), the unit's overload protection will activate. To resume charging, press the AC overload protector button after the issue is resolved. If the AC input current is too high, it may trigger PowerProtection. The product will resume operation after the protection is reset.

Use the original standard AC charging cable. ALLPOWERS is not responsible for damages caused by using unofficial charging cables. Connect directly to a wall outlet; extension sockets are not recommended. Ensure household wiring can support 7A (220V-240V) / 15A (100V-120V). If these conditions are not met, use standard or mute charging modes.

*To prevent the power station from operating at low voltage, please charge it within 24 hours if the power drops below 5%.

3.4 Solar Charging

Users can charge the product by connecting solar panels in series. Ensure the solar panel's output voltage is within 60V, the maximum current is 13A, and the maximum charging power is less than 650W.

Diagram Description: Shows ALLPOWERS Solar Panel connected via XT60 cable to the R1500's Solar/Car Input port.

3.5 Smart Extra Battery

The R1500 can be expanded using ALLPOWERS Smart Extra Batteries, supporting up to 2 additional battery packs. Connect them using the provided cable. Note that while the total capacity increases, the maximum output power remains the same. Ensure correct connection to avoid product damage.

Diagram Description: Illustrates two scenarios. In "Normal" operation, the power station is charged by the grid and powers an electrical appliance. In "Power Cut Off" operation, when the grid power is lost, the R1500 automatically powers the electrical appliance from its battery. The diagram also shows the R1500 connected to an Extra Battery.

3.6 UPS Function (Uninterruptible Power Supply)

This product supports UPS functionality. When connected to mains power, the unit draws power from the grid. If the mains power is suddenly cut off, the product automatically switches to battery power within 15ms. It is recommended to use only one device at a time to avoid overload protection. If the power station malfunctions or data is lost due to improper operation, ALLPOWERS is not responsible.

Note:

1. When AC charging and AC output are active, the UPS function icon (⚡) will light up automatically.
2. For UPS operation:
• AC output ports should not exceed 1500W for 100-120V mains voltage.
• AC output ports should not exceed 1800W for 220-240V mains voltage.

If these limits are exceeded, the power station will limit output to 5% of its capacity and turn off AC output.

3.7 App Operation Guide

3.7.1 App Download

Scan the QR codes below to download and install the ALLPOWERS mobile application for iOS and Android.

[QR Code for iOS] [QR Code for Android]

3.7.2 Bluetooth Connection

To connect your mobile device via Bluetooth:

1. Ensure Bluetooth is enabled on both the power station and your mobile phone.
2. Open the ALLPOWERS app and click the Bluetooth device bar icon to enter the connection interface.
3. Tap the scan icon to search for available power stations.
4. Select the "ALLPOWERS R1500" from the list and tap to connect. The device will appear in the Bluetooth device list upon successful connection.

3.7.3 Wi-Fi Connection

To connect your mobile device via Wi-Fi:

1. In the app, click on the power station's data and then the "ALLPOWERS" name to display the Wi-Fi Connection QR code.
2. Alternatively, click the ⚙️ icon in the Wi-Fi device bar within the app to access the Wi-Fi connection interface.
3. Select the portable power station to enter the connection page.
4. Tap "SCAN", then scan the QR code displayed on the device to pair.
5. Upon successful pairing, the power station's name and online status will be displayed.

Diagram Description: Shows steps for Wi-Fi connection, including displaying QR code, scanning, and successful connection confirmation. Includes prompts like "Please place the device as close to the router as possible" and "connected device successfully."

3.7.4 App Operation Instructions

The mobile app provides control and monitoring of the power station:

• Display Output Remaining Time: Shows estimated time left based on current output.
• Display Remaining Battery Capacity: Shows the current battery percentage.
• Display Input Power: Shows the power being received (e.g., from AC or solar).
• Display Output Power: Shows the total power being delivered to connected devices.
• AC Switch: Toggle AC output on/off.
• DC Switch: Toggle DC outputs (USB, Car Port) on/off.
• Frequency Switching Options: Select between 50Hz and 60Hz output frequencies.

4. FAQ

1. Q1. What type of battery does the product use?
   This product uses high-quality Lithium Iron Phosphate (LFP) batteries.
2. Q2. What appliances can the R1500 power station support?
   The AC output ports have a rated power of 1800W (3000W surge) for both 100-120V and 220-240V. It can power most household appliances, provided the total charging power of all connected devices is less than the rated power.
3. Q3. How do I know how long the product can provide power?
   The LCD screen displays the remaining battery life, which can be estimated for devices with stable power consumption.
4. Q4. How do I know if the product is charging?
   When charging, the LCD screen will show the remaining charging time, and the battery indicator circle will animate.
5. Q5. How do I clean the product?
   Wipe the product with a dry, soft, and clean cloth or paper.
6. Q6. How should I store the product?
   Turn off the product before storing it in a dry, ventilated place at room temperature. Do not place it near water. For long-term storage, it is recommended to discharge the battery to 30% and recharge to 60% every three months to prolong its lifespan.
7. Q7. Can this product be taken on an airplane?
   No.
8. Q8. Can the R1500 be charged while in use?
   Yes, the product supports simultaneous charging and discharging.
9. Q9. Is the actual output capacity of the product consistent with the target capacity in the user manual?
   The capacity indicated in the user manual is the nominal battery capacity. Due to efficiency losses during charging and discharging, the actual output capacity may be slightly lower than specified. The display shows the input power.
10. Q10. How to activate/deactivate the power station's Bluetooth & Wi-Fi?
    Bluetooth & Wi-Fi are disabled by default from the factory. The corresponding icons disappear when they are turned off.
11. Q11. How to activate/deactivate the button beep?
    The button beep is enabled by default from the factory.

5. Troubleshooting

Error codes displayed on the screen indicate specific faults. The table below lists common indicators, problems, and solutions:

6. Package Contents

The package includes:

• ALLPOWERS R1500 Portable Power Station
• AC Charging Cable
• User Manual and Warranty Card

7. Statement

Before using this product, please read the user manual thoroughly to ensure correct operation. Improper use may lead to serious personal injury, harm to others, or damage to the product and property. By using this product, you acknowledge and accept all terms and conditions outlined in this document. The user is responsible for their actions and any consequences thereof. ALLPOWERS is not liable for losses resulting from the user's failure to operate the product according to the manual.

The company reserves the final right of interpretation for this document and all related product documentation, in accordance with applicable laws and regulations. Updates, revisions, or cancellations may occur without prior notice; please visit the official ALLPOWERS website for the latest product information.

This product is not intended for use in applications requiring extremely high reliability and safety, such as aerospace equipment, trunk communication equipment, nuclear control equipment, or medical equipment. Users must exercise their own judgment to confirm the suitability of this product for their intended use.

If this product is used in the aforementioned applications, ALLPOWERS will not be held responsible for any injuries, fires, or equipment malfunctions caused by product failure.

8. Contact Us

For any questions or assistance with ALLPOWERS products and services, please contact us:

• Email: support@allpowers.com
• Official Website: www.allpowers.com