ALLPOWERS R1500 Portable Power Station

1. Safety Instructions

This product is a power station battery. Please follow basic safety precautions:

1. Ensure the product is operated in a dry, well-ventilated area. If it gets wet, dry it thoroughly before use.
2. For reduced risk of injury, close monitoring is required when this product is used near children.
3. Do not insert fingers into the product to avoid electric shock or other hazards.
4. Avoid touching AC terminals with metal, as this may cause electric shock, fire, or other dangers.
5. Do not block the product's vents during charging or use, as this can cause permanent damage.
6. Do not expose the product to rain or snow.
7. Do not use this product in environments with strong static electricity or strong magnetic fields.
8. Use the cable specifically designed for the product. The company is not responsible for damage caused by third-party equipment.
9. Do not disassemble the product. If service or maintenance is required, seek a qualified repair technician.
10. Improper use, drops, or excessive force can damage the product.
11. When disposing of used batteries, separate batteries of different electrochemical systems.
12. In case of fire, use a dry powder extinguisher or immerse in water.
13. Keep the product away from fire sources and heat.

2. Specifications

General Information

Input Ports

• AC Input: (100~120)V ~ 15A Max, (220~240)V ~ 6.8A Max
• Solar Input: 12~60V 13A, 650W Max
• Car Charger Input: 12V/24V DC

Output Ports

• AC Output*4: 100-120V/220-240V 1800W Max (Surge 3000W)
• USB-A*2: 5V/3A, 9V/2A, 12V/1.5A, 36W Max
• USB-C*2: 5/9/12/15V/3A, 20V/5A, 200W Max
• Car Port Output: 12V/10A, 120W Max
• Wireless Charger*2: 30W Max

Battery Information

• Battery Type: Lithium Iron Phosphate (LFP)
• Protection Type: High temperature protection, low temperature protection, over-discharge protection, over-charge protection, short circuit protection, over-current protection.

Environmental Operating Temperature

• Charge Temperature: 0°C ~ 40°C (32°F ~ 104°F)
• Discharge Temperature: -10°C ~ 40°C (14°F ~ 104°F)
• Storage Temperature: -20°C ~ 40°C (-4°F ~ 104°F) (Recommended: 20°C ~ 30°C)
• Operating Humidity Range: 10% - 90%

Certification

The product complies with CE, FCC, RoHS, and IC standards.

3. User Guide

3.1 Product Appearance Introduction

The power station features several ports and indicators:

• Front Panel: LCD Display, [USB-A Output]*2, [USB-C Output]*2, [AC Output]*4, [Power Button], [DC On/Off Button], [Overload Protector].
• Rear/Side Panel: [AC Input], [Solar/Car Input], [Extra Battery Connector]*2, [Wireless Charger]*2.

3.2 LCD Screen Icon Introduction

The LCD screen displays various status icons:

• Battery Percentage Icon: Shows remaining battery charge.
• Input Power Icon: Displays the power being drawn into the station.
• Output Power Icon: Shows the power being supplied by the station.
• Mains Frequency Display: Indicates the AC frequency (e.g., 50Hz/60Hz).
• Time Remaining/Fault Code: Displays estimated time left or error codes.
• Power Saving Mode Icon: Indicates if power saving mode is active.
• Fast Charge Icon: Shows when fast charging is enabled.
• Mute Charge Icon: Indicates if charging is in mute mode.
• Output Overload Icon: Alerts if the output is overloaded.
• High Temperature Warning Icon: Signals if the unit is overheating.
• Extra Battery Active Icon: Shows when an extra battery is connected and active.
• DC Connect Active Icon: Indicates an active DC output connection.
• AC Connect Active Icon: Indicates an active AC output connection.
• UPS Active Icon: Shows when the UPS function is engaged.
• Fan Operating Icon: Indicates if the cooling fan is running.
• KFZ Output Icon: Likely relates to a specific output type (e.g., car port).
• Bluetooth Icon: Shows Bluetooth connectivity status.
• WIFI Icon: Shows Wi-Fi connectivity status.

3.3 AC Cargo

The R1500 utilizes AP-Power fast charging technology, allowing adjustment between Fast, Standard, and Silent charging modes. The maximum input power can reach 1500W in Fast mode, 1000W in Standard mode, and 400W in Silent mode (self-adjusting technology). The default input mode is Silent. For AC input current exceeding 20A (100-120V) or 15A (220-240V), the power station will activate overload protection. After confirming the product is not defective, press the AC overload protector to resume charging. If the AC input current is too high, it may trip the power ratio switch. After confirming the product is not defective, ensure power protection and flow protection are active. Use the original AC charging cable and plug directly into a wall socket. Avoid using extension cords. Ensure your home wiring can support 7A (220V-240V) or 15A (100V-120V). If not, switch to Standard or Silent charging mode.

*To prevent the power station from operating at low voltage, charge it within 24 hours if the battery level is below 5%.

3.4 Solar Charging

Users can charge the product by connecting solar panels in series as shown in the diagram. When using solar charging, ensure the solar panel's output voltage is within 60V, the current is within 13A, and the maximum charging power is within 650W. Connect according to the user manual specifications.

3.5 Smart Extra Battery

The R1500 can connect up to two ALLPOWERS Smart Extra Batteries to expand its capacity. When connecting, follow the specifications in the user manual. Note that the maximum rated output power does not change; only the battery capacity is added. Use the provided connection cable to avoid product damage.

3.6 UPS Function (Uninterruptible Power Supply)

This product supports UPS functionality. Connect the mains power to the product's input port via the AC charging cable. Connected electrical appliances can then use the product's AC output port. In this mode, AC power is supplied directly from the mains. If the mains power is suddenly cut off, the product will automatically switch to battery power within 15 milliseconds. It is recommended to use only one device at a time to avoid overloading the product. If the power station malfunctions or data is lost due to improper operation, the company is not liable.

NOTE 1: When AC charging and AC output are active, the UPS function icon will illuminate.

NOTE 2: For the UPS to function correctly, the maximum power of the AC output ports should not exceed 1500W for a 100-120V mains voltage range. Otherwise, the power station will supply power until its battery reaches 5% capacity and then shut off AC output. For a 220-240V mains voltage range, the maximum power of the AC output ports should not exceed 1800W.

Normal Operation: When fully charged, mains power directly supplies the device.

Power Outage: The R1500 automatically powers the device using its battery.

3.7 App Operation Guide

3.7.1 Download App

Use your mobile phone to scan the QR codes provided in the original document to download and install the ALLPOWERS app from the iOS App Store or Google Play Store.

3.7.2 Bluetooth Connection

1. Ensure the power station and your mobile phone's Bluetooth are turned on.
2. Open the ALLPOWERS app and tap the Bluetooth icon in the device list to enter the Bluetooth connection interface.
3. Tap to scan for and search for a power station.
4. Select the corresponding power station and tap to connect.
5. Once connected successfully, 'AP R1500 v2.0' will appear in the Bluetooth device list.

3.7.3 WiFi Connection

1. In the power station's data interface, tap the ALLPOWERS name to display the WiFi connection QR code.
2. Open the ALLPOWERS app and tap the Wi-Fi icon in the device list to enter the Wi-Fi connection interface.
3. Select the portable power station to proceed to the connection page.
4. Tap 'Scan', scan the QR code on the device to connect and pair it.
5. After successful pairing, the power station's name and online status will be displayed.

3.7.4 Mobile App Operation Instructions

The mobile app interface allows you to monitor and control the power station. Key features include:

• Display Output Remaining Time: Shows the estimated time the station can power connected devices.
• Display Remaining Battery Capacity: Visualizes the current battery charge level.
• Display Input Power: Shows the power being drawn into the station.
• Display Output Power: Shows the power being supplied to connected devices.
• AC Switch: Toggle the AC output on or off.
• DC Switch: Toggle the DC outputs on or off.
• Frequency Switching Options: Select between 50Hz and 60Hz for AC output.

4. FAQ

Q1. What type of battery does the product use?

This product uses high-quality Lithium Iron Phosphate (LFP) batteries.

Q2. What devices can the R1500 power?

The R1500's AC output port has a rated power of 1800W (3000W surge). It can power most household appliances. Ensure the total power consumption of all connected devices is less than the rated power.

Q3. How can I know how long the product can supply power?

The LCD display shows the remaining battery time, which can be estimated for devices with stable power consumption.

Q4. How do I know if the product is charging?

While charging, the LCD display shows the remaining charging time, and the battery indicator circle animates.

Q5. How should I store the product?

Clean the product with a dry, soft cloth. Store it in a dry, ventilated place at room temperature. Do not store it near water.

Q6. How should I store the product for long-term use?

For long-term storage, it is recommended to discharge the battery to 30% and recharge it to 60% every three months to prolong its lifespan.

Q7. Can this product be brought on an airplane?

No.

Q8. Can the R1500 be charged while in use?

Yes, the product supports simultaneous charging and discharging.

Q9. Is the actual output capacity consistent with the manual?

The capacity indicated in the user manual is the nominal battery pack capacity. Due to efficiency losses during charging and discharging, the actual output capacity may be lower than specified.

Q10. How do I turn on/off the Bluetooth & Wi-Fi on the power station?

Bluetooth and Wi-Fi are turned off by default. To turn them on/off, press and hold the 'DC Output' button for 3 seconds after powering on the device. The Bluetooth & Wi-Fi icon will change status accordingly.

Q11. How do I turn the button beep on/off?

The button beep is enabled by default. To turn it on/off, press and hold the 'DC+AC Output' button for 3 seconds after powering on the device until you hear a sound.

5. Troubleshooting

If a fault code is displayed on the screen, refer to the following table for the related fault type and recovery method.

6. Package Contents

• ALLPOWERS R1500 Portable Power Station
• AC Charging Cable
• User Manual and Warranty Card

7. Declaration

Before using this product, please read the user manual thoroughly to ensure correct operation. Failure to operate correctly may cause serious injury to yourself or others, or result in damage to the product and property. By using this product, you acknowledge that you have understood, recognized, and accepted all terms and contents of this document. The user agrees to be responsible for their own actions and all consequences arising from them. ALLPOWERS is not liable for any losses caused by the user's failure to use the product according to the manual.

In compliance with laws and regulations, the Company reserves the right of final interpretation of this document and all related product documents. The company may update or revise this information without prior notice. Please visit the official ALLPOWERS website for the latest product information.

This product is not intended for use in applications requiring extremely high reliability and safety, such as aerospace equipment, trunk communication equipment, nuclear power control equipment, or medical equipment. Please judge the suitability of this product for your intended use. If this product is used in such critical equipment or applications, ALLPOWERS will not be responsible for any personal injury, fire, or equipment malfunction caused by product failure.

8. Contact Us

If you have any questions or need assistance with our products and services, please email us at support@allpowers.com. You can also visit our official website at www.allpowers.com.