ALLPOWERS R2500 Portable Power Station

1. Safety Instructions

• Operate in a dry, well-ventilated place; dry thoroughly if wet before use.
• Close supervision required when used near children to reduce injury risk.
• Do not insert fingers into the product to avoid electric shock or other hazards.
• Avoid touching AC interface with metal to prevent electric shock, fire, or other hazards.
• Do not block product vents during charging or use to prevent permanent damage.
• Do not expose the product to rain or snow.
• Do not use in environments with strong static electricity or strong magnetic fields.
• Use the product's specially designed cable; the company is not liable for damage caused by third-party equipment.
• Do not disassemble the product. Seek qualified repair for service or maintenance.
• Improper use, drops, or excessive force can damage the product.
• Separate batteries of different electrochemical systems when disposing of used batteries.
• In case of fire, use dry powder extinguisher or submerge in water.
• Keep the product away from fire and heat sources.

2. Specifications

General Information

Input Ports

• AC Input: (100~120)V ~ 15A Max, (220~240)V ~ 10A Max
• Solar Input: (12~150)V = 13A, 1000W Max
• Car Charger Input: 12V/24V DC

Output Ports

• AC Output: 100-120V/220-240V 2500W Max (Surge 4000W)
• USB-A*2: 5V 2.4A, 24W Max
• USB-A*2: 5V 3A, 9V 2A, 12V 1.5A, 36W Max
• USB-C*2: 5/9/12/15V 3A, 20V 5A, 200W Max
• DC5525*2: 12V 5A, 120W Max
• Car Port: 12V 10A, 120W Max

Battery Information

• Battery Type: Lithium Iron Phosphate LFP
• Protection Type: High temperature, low temperature, discharge, overcharge, overload, short circuit, overcurrent protection.

Environmental Operating Temperature

• Charging: 0°C ~ 40°C (32°F ~ 104°F)
• Discharging: -10°C ~ 40°C (14°F ~ 104°F)
• Storage: -20°C ~ 40°C (-4°F ~ 104°F) *Recommend: 20 ~ 30°C
• Operating Humidity: 10 - 90%

Certifications: CE, FCC, RoHS, IC, UKCA, WEEE symbols [Recycling symbol].

3. User Guide

3.1 Product Appearance Introduction

Description of product ports:

• Overload protector [Protection symbol]
• USB-C Output*2
• USB-A Output*4
• LED Display
• Car Port Output
• DC Output
• AC Input
• Solar Input
• Power On/Off [Power symbol]
• AC Output*4
• RV Output
• USB On/Of
• AC On/Of
• DC On/Of
• Extra Battery Connector

3.2 Screen Icon Introduction

Description of screen icons:

• Icon 1: Battery percentage display [Battery icon].
• Icon 2: Input power display [Power input icon].
• Icon 3: Output power display [Power output icon].
• Icon 4: Mains frequency display [Frequency icon].
• Icon 5: Time remaining, fault code display [Clock/Code icon].
• Icon 6: Power saving mode indicator [Leaf/Eco icon].
• Icon 7: Fast charge indicator [Lightning bolt icon].
• Icon 8: Mute charge indicator [Mute symbol].
• Icon 9: Output overload indicator [Overload symbol].
• Icon 10: High temperature warning icon [Thermometer/Warning icon].
• Icon 11: Extra battery active indicator [Plus/Battery icon].
• Icon 12: DC connect active indicator [DC plug icon].
• Icon 13: AC connect active indicator [AC plug icon].
• Icon 14: UPS active indicator [UPS symbol].
• Icon 15: Fan operating indicator [Fan icon].
• Icon 16: KFZ output icon [Car icon].
• Icon 17: Bluetooth icon [Bluetooth symbol].
• Icon 18: WIFI icon [Wi-Fi symbol].

3.3 AC Cargo

The product uses AP-Power fast charging technology with adjustable modes: fast, standard, and mute. Maximum input power can reach 1500W in mute mode, 1000W in standard mode, and 650W in mute auto-adjusting mode for silence. The default input power mode is mute. The charging power is adjusted via the mode switch in the application; refer to "Operation Guide 3.7" for details. If the AC input current continuously exceeds 10A (220-240V) or 15A (100-120V), the power station will activate its overload protector. After confirming the product is not defective, press the AC overload reset button to resume charging. If the AC input current is too high, it may trip the PowerProtection switch. After confirming the product is not defective, turn on the power protection to resume operation. Use the original standard AC charging cable. The company assumes no liability for damage caused by using unofficial charging cables. Please connect directly to the wall socket. Connecting through an extension cord is not recommended. Ensure your home wiring can support 10A (220-240V) or 15A (100-120V). If these conditions are not met, switch to standard or mute charging mode.

Note: For low voltage, charge within 24 hours when power is below 5% [Low voltage warning symbol].

3.4 Solar Charging

Users can charge the product by connecting solar panels in series as shown in the figure. [Diagram description: An ALLPOWERS Solar Panel is connected via an XT60 connector to the power station's solar input port. Specifications for the connection are (100~120)V~15A, (220~240)V~10A Max (Fast charge).] When using the product for solar panel charging, connect according to the user manual specifications. Before connecting the solar panel, confirm that the panel's output voltage specification is within 150V, the maximum current is 13A, and the maximum charging power is within 1000W.

3.5 Smart Extra Battery

The R2500 can use the ALLPOWERS Smart Extra Battery to expand its capacity to meet higher demands. When connecting an extra battery, follow the specifications in the user manual. Note that the maximum output power does not change in the connected state; only the battery capacity is added. Use the connection cable provided by ALLPOWERS to avoid product damage. Users can connect the power station's capacity as shown in the figure. [Diagram description: The R2500 unit is shown stacked or connected to an ALLPOWERS Extra Battery unit.]

Normal Operation: When fully charged, the mains supply directly powers the device. [Diagram description: Mains power symbol connected to the power station's AC input, and the power station's AC output powering electrical appliances.]

3.6 UPS Function (Uninterruptible Power Supply)

This product supports UPS functionality. Connect the mains power to the product's AC input port, and electrical devices can use the product's AC output port for power. In this state, the AC power comes from the mains, not the battery. If the mains power is suddenly cut off, the product will automatically switch to battery power supply within 15ms. It is recommended to use only one device at a time to avoid triggering the product's overload protection. If the power station malfunctions or data is lost due to operations not following instructions, ALLPOWERS is not responsible.

NOTE 1: When AC charging and AC output are active, the UPS function icon illuminates automatically. [UPS active icon symbol].

NOTE 2: To ensure UPS functionality, the maximum power of the AC output ports should not exceed 1500W for a 100~120V mains voltage range, or 2000W for a 220~240V mains voltage range. Otherwise, the mains and the power station will supply power to devices simultaneously until the power station's power drops to 5% and it switches to AC output.

Power Outage: The R2500 automatically powers the device. [Diagram description: Power outage symbol indicating no mains power, and the power station's AC output powering electrical appliances.]

3.7 App Operation Guide

3.7.1 Download the App:

Use your mobile phone to scan the QR codes below to download and install the app. [QR code for iOS] [QR code for Android]

3.7.2 Bluetooth Connection Station:

1. Confirm the power station and mobile phone Bluetooth are turned on. Refer to "4. FAQ: Q10" for Bluetooth operation. [Bluetooth symbol].

2. Click the Bluetooth device icon in the mobile app's Bluetooth device bar to enter the Bluetooth connection interface.

3. Click next to scan and search for a power station.

4. Select the corresponding power station and click to connect.

5. After successful connection, "AP R2500 V2.0" will be displayed in the Bluetooth device bar.

[Diagram description: A sequence of mobile app screenshots showing Bluetooth connection steps: adding a device, selecting a device, connecting, and confirming connection.]

3.7.3 Wi-Fi Connection:

1. Click the data on the power station and click the "AllPowers" name to display the Wi-Fi connection code. [Wi-Fi symbol]. Refer to "4. FAQ: Q10" for Wi-Fi operation.

2. Click the Wi-Fi device icon in the mobile app's device bar to enter the Wi-Fi connection interface.

3. Select the portable power station to enter the connection page.

4. Click SCAN, scan the QR code on the device to connect and link the peripheral.

5. After linking, the power station's name and online status will be displayed as shown in the figure below. [Diagram description: Mobile app screenshots showing Wi-Fi connection steps: adding a device, placing the device near the router, network distribution success, and connected device confirmation.]

3.7.4 Mobile App Operation Instructions:

The mobile app interface displays:

• Display output remaining time [Clock icon].
• Display remaining battery capacity [Battery icon].
• Display input power [Power input icon].
• Display output power [Power output icon].

Controls include:

• AC switch [AC symbol/switch].
• DC switch [DC symbol/switch].
• Car Port switch [Car symbol/switch].

Settings options:

• Work Mode: Can be configured to Fast, Standard, or Mute mode.
• ECO Mode: Configure AC or DC auto-shutdown time (1, 2, 4, or 6 hours). When the power station operates in this mode, AC or DC will automatically shut down after the set time.

Other options include Firmware upgrade and Delete User Device.

4. FAQ

Q1. What type of battery does the product use?

This product uses high-quality Lithium Iron Phosphate (LFP) batteries.

Q2. What devices can the R2500 power?

The AC output port of this product has a rated power of 100V-120V 2500W (4000W peak) or 220V-240V 2500W (4000W peak), which can power most household appliances. It is recommended to confirm the power consumption of your appliance and ensure the total power of all connected devices is less than the rated power.

Q3. How do I know how long the product can supply power?

The product's LCD screen will display the remaining battery duration, which can be estimated for devices with stable power consumption.

Q4. How can I tell if the product is charging?

When charging, the LCD screen will show the remaining charging time, and the battery indicator circle will have a breathing animation effect.

Q5. How do I clean the product?

Clean this product with a soft, dry cloth or paper towel.

Q6. How should I store the product?

When storing, turn off the product first and then store it in a dry, ventilated place at room temperature. Do not place the product near water. For long-term storage, it is recommended to discharge the battery to 30% and recharge it to 60% every three months to prolong the product's lifespan.

Q7. Can this product be brought on an airplane?

No.

Q8. Can the R2500 be charged while in use?

Yes, the product supports simultaneous charging and discharging.

Q9. Is the product's actual output capacity consistent with the target capacity in the User Manual?

The capacity indicated in the user manual is the nominal capacity of the product's battery pack. Due to certain efficiency losses during the charging and discharging process, the actual output capacity of the product is slightly lower than the specified capacity. The display shows the input power.

Q10. How do I turn the power station's Bluetooth & Wi-Fi on/off?

Bluetooth & Wi-Fi are turned off by default from the factory. In this state, the icon disappears. To turn on/off: after powering on the device, press and hold the "USB+AC Output" button for 3 seconds until you hear a beep.

Q11. How do I turn the button beep on/off?

The button beep is turned on by default from the factory. To turn on/off: after powering on the device, press and hold the "USB+AC Output" button for 3 seconds until you hear the sound.

5. Troubleshooting

Fault codes are displayed on the screen. The related fault types and recovery methods are as follows:

6. Package Contents

The package includes:

• ALLPOWERS R2500 unit.
• AC Charging cable.
• User Manual and Warranty Card.

[Diagram description: An image showing the ALLPOWERS R2500 unit, an AC charging cable, and the User Manual and Warranty Card.]

7. Declaration

Before using this product, please read the user manual thoroughly to ensure correct operation. Improper use may cause serious personal injury or damage to the product and property. By using this product, you acknowledge that you have understood, recognized, and accepted all terms and conditions of this document. The user agrees to be responsible for their own actions and all consequences arising from them. ALLPOWERS is not responsible for any losses caused by the user's failure to use the product according to the user manual.

In compliance with laws and regulations, the Company reserves the right to the final interpretation of this document and all related product documents. For updates, revisions, or terminations, please visit the official ALLPOWERS website for the most current product information.

This product is not intended for use in applications requiring extremely high reliability and safety, such as aerospace equipment, trunk communication equipment, nuclear power control equipment, and medical equipment. Please judge the suitability of this product and device yourself. If this product is used in the aforementioned equipment or applications, ALLPOWERS will not be liable for any personal injury, fire, or equipment malfunction caused by the failure of this product.

8. Contact Us

If you have any questions or need assistance with our products and services, please email us at support@allpowers.com. Our official website is: www.allpowers.com.