ALLPOWERS R1500 Portable Power Station User Manual

1. Safety Instructions

• This product is a power station battery. Take basic precautions, including operating in a dry, well-ventilated place. If it gets wet, dry thoroughly before use.
• Close monitoring is required when using this product near children to reduce the risk of injury.
• Do not insert fingers into the product, as it may cause electric shock or other dangers.
• Do not touch the AC interface with metal, as it may cause electric shock, fire, or other dangers.
• Do not block the product vents during charging or use, as it may cause permanent damage.
• Do not expose the product to rain and snow.
• It is forbidden to use this product in environments with strong static electricity or strong magnetic fields.
• Use only the cable specially designed for the product. The company is not responsible for damage caused by third-party equipment.
• Do not disassemble the product at will. For service or maintenance, contact a qualified repairer.
• Improper use, falling, or excessive force may damage the product.
• When disposing of used batteries, separate batteries of different electrochemical systems.
• In case of fire, use a dry powder fire extinguisher or immerse in water.
• Keep the product away from fire and heat sources.

2. Specifications

General Information

Input Ports

Output Ports

Battery Info

Environmental

Certification

3. User Guide

3.1 Product Appearance Introduction

The front panel features two USB-A output ports, two USB-C output ports, a car port output, a wireless charger output (36W max), an LCD display, AC input, solar input, four AC output ports, a Power On/Off button, a DC On/Off button, and an AC On/Off button. An Extra Battery Connector is also present.

3.2 Introduction of Display (Touch) Icons

• Percentage of charge: Displays the remaining battery percentage.
• Input Power: Shows the current input power.
• Output Power: Shows the current output power.
• AC output hertz number: Displays the AC output frequency.
• Time remaining, fault code: Indicates estimated remaining time or displays fault codes.
• Power saving mode icon: Indicates power saving mode is active.
• Fast charge mode icon: Indicates fast charging is active.
• Mute mode icon: Indicates mute mode is active.
• Output overload icon: Indicates an output overload condition.
• High temperature warning mark: Indicates a high-temperature warning.
• Battery pack merge icon: Indicates battery pack expansion.
• DC indicates the icon: Shows DC output status.
• AC indicates the icon: Shows AC output status.
• The UPS indicates the ID: Shows UPS mode status.
• Fan operating ID: Indicates the fan is operating.
• Car charge output icon: Indicates car charger output.
• Bluetooth connection icon: Shows Bluetooth connection status.
• WIFI connection icon: Shows Wi-Fi connection status.

3.3 AC Charging

The product uses AP-POWER fast charging technology. Charging power can be adjusted via Fast Mode (max 1500W input), Standard Mode (max 1000W input), or Mute Mode (400W input, self-adjusting for quiet operation). The default input power is Mute Mode; adjust charging power in the APP. If the AC input current exceeds 20A (100-120V) or 10A (220-240V), the power station will protect itself, and the overload protector button will pop up. Press it again after confirming no product fault to resume charging. If the AC input current is too high, the power protection switch may trip; turn it back on after confirming no fault. Use the original standard AC charging cable. Connect directly to a wall socket; extension sockets are not recommended. Ensure your household wiring can support 7A (220V-240V) / 15A (100V-120V). If not, switch to Standard or Mute mode.

Note: To avoid low voltage, charge within 24 hours when power is less than 5%.

3.4 Solar Charging

Users can charge the product by connecting solar panels in series via the XT60 input port. Ensure the solar panel's output voltage is within 60V, maximum current is 13A, and maximum charging power is within 650W.

3.5 Smart Extra Battery

The R1500 can expand its capacity using ALLPOWERS Smart Extra Batteries, supporting up to two additional battery packs. The rated maximum output power remains unchanged; only the battery capacity is increased. Use the provided connection cable to avoid product damage.

3.6 UPS Function (Uninterruptible Power Supply)

Connect the power grid to the product's AC input port and the appliance to the product's AC output port. The appliance will draw power from the grid via the power station. If the grid power is suddenly cut off, the product will automatically switch to battery power within 15ms. It is recommended to use only one device at a time to avoid overload. For UPS function, the AC output power should not exceed 1500W (100-120V) or 2000W (220-240V) to ensure proper operation. If these limits are exceeded, the mains and power station will supply power simultaneously until the power station reaches 5% capacity and turns off AC output.

Note: Turn on AC output first, then plug into the wall outlet. Ensure the UPS icon is lit. UPS function activates automatically during a power outage.

3.7 APP Operation Guide

3.7.1 APP Download

Scan the QR code to download and install the ALLPOWERS APP for iOS and Android devices.

3.7.2 Bluetooth Connection

Ensure Bluetooth is enabled on both the power station and your mobile phone. Open the mobile APP, tap the Bluetooth icon, enter the connection interface, scan for the power station, select it, and connect. Upon successful connection, 'AP R1500 V2.0' will be displayed.

3.7.3 WIFI Connection

Access the device data on the power station and tap the ALLPOWERS name to display the Wi-Fi connection QR code. Enable Wi-Fi on your mobile phone. Open the mobile APP, tap the Wi-Fi icon, select the portable power station, scan the QR code on the device to connect and bind. After successful binding, the power station's name and online status will be displayed.

3.7.4 Mobile APP Operation Instructions

The mobile APP allows you to view the remaining output time, remaining battery capacity, and input power. You can also adjust settings such as charging power modes (Fast, Standard, Mute) and set the ECO mode with automatic AC or DC shutdown timers (1, 2, 4, or 6 hours). Other functions include firmware upgrades and device removal.

4. FAQ

Q1. What type of battery does the product use?

This product uses high-quality lithium iron phosphate batteries (LFP).

Q2. What devices can R1500 power?

The AC output port has a rated power of 1800W (peak 3000W) and can power most household appliances. Ensure the total power consumption of all connected devices is less than the rated power.

Q3. How to know how long the product can supply power?

The LCD screen displays the estimated remaining battery life, which can be used to gauge runtime for devices with stable power consumption.

Q4. How to judge the product is charging?

When charging, the LCD screen shows the remaining charging time, and the battery indicator circle around the percentage has a breathing animation effect.

Q5. How to clean the product?

Wipe the product with a dry, soft, clean cloth or paper towel.

Q6. How to store the product?

Turn off the product and store it in a dry, ventilated place at room temperature. Do not store near water. For long-term storage, it is recommended to discharge the battery to 30% and recharge to 60% every three months to prolong its service life.

Q7. Can this product be brought on the plane?

No.

Q8. Can the R1500 be charged while using?

Yes, the product supports simultaneous charging and discharging.

Q9. Is the actual output capacity consistent with the target capacity in the user manual?

The capacity specified in the manual is the rated capacity. The actual output capacity is lower than the rated capacity due to efficiency losses during charging and discharging.

Q10. How to turn on/off Bluetooth & WIFI?

Bluetooth and Wi-Fi are off by default. Turn them on/off by pressing and holding the "DC OUTPUT" button for 3 seconds after turning on the device. The icon on the display indicates the status (always on means on, icon disappears means off).

Q11. How to turn on/off the beep?

The button beep is on by default. Turn it on/off by pressing and holding the "DC OUTPUT + AC OUTPUT" button for 3 seconds after turning on the device until the prompt sound is heard.

5. Troubleshooting

Fault codes are displayed on the screen. Refer to the table below for fault types and solutions.

6. Package Contents

• ALLPOWERS R1500
• AC Charging cable
• MC4 to XT60 charging cable
• User Manual and Warranty Card

7. Statement

Before using this product, please read the user manual thoroughly to ensure correct use. Incorrect operation may cause serious injury or damage. By using this product, you acknowledge and accept all terms and conditions. The user is responsible for their actions and consequences. ALLPOWERS is not liable for losses due to improper use. The company reserves the right to interpret this document and related product documents. Visit the ALLPOWERS official website for the latest product information.

This product is not intended for applications requiring extremely high reliability and safety, such as aerospace equipment, trunk communication equipment, nuclear power control equipment, or medical equipment. Users must independently judge the suitability of this product for their specific devices. ALLPOWERS is not responsible for any personal injury, fire, or equipment malfunction resulting from the failure of this product in such applications.

8. Contact Us

For questions or assistance with products and services, please email support@allpowers.com. Visit the official website: www.allpowers.com.