ALLPOWERS R600 Portable Power Station User Manual

1. Safety Instructions ⚠️

1. Ensure the product is used in a dry, well-ventilated location. If it gets wet, dry it thoroughly before use.
2. To reduce the risk of injury, close supervision is necessary when this product is used near children.
3. Do not insert fingers into the product, as this may cause electric shock or other hazards.
4. Do not touch the AC interface with metal, as this may cause electric shock, fire, or other hazards.
5. During charging or use, do not block the product's air vents, as this may cause permanent damage.
6. Please do not expose the product to rain or snow.
7. Using this product in an environment with strong static electricity or a strong magnetic field is prohibited.
8. Please use the cable specifically designed for the product. The company assumes no responsibility for damage caused by third-party equipment.
9. Do not disassemble the product at will. If this product requires service or maintenance, find a qualified repairer.
10. Improper use, drops, or excessive force may cause damage to the product.
11. When disposing of used batteries, please separate batteries of different electrochemical systems.
12. In case of fire, a dry powder fire extinguisher can be used or the product can be immersed in water.
13. Ensure the product is kept away from fire and heat sources.

2. Specifications ?

General Information

• Net Weight: Approx. 5.6 kg (12.34 lbs)
• Dimensions: 285x195x190mm (11.2x7.6x7.5 inches)
• Battery Capacity: 299Wh (25.6V-11.68Ah)
• Bluetooth: Supported
• UPS (Uninterruptible Power Supply): Supported

Input Ports

• AC Input: (100~120)V ~ 4A max, (220~240)V ~ 2A max, 50Hz/60Hz
• Solar Input: (12~60)V 8.8A, 220W max
• Car Charger Input: 12V/24V DC

Output Ports

• AC Output*2: 100-120V/220-240V 600W MAX (Surge 1200W)
• US: 110-120V 5A
• CN: 220V 2.7A
• EU: 230V 2.6A
• AU: 240V 2.5A (max.)
• USB-A Output*2: 5V 3A, 9V 2A, 12V 1.5A, 36W Max
• USB-C Output*2: 5/9/12/15V 3A, 20V 5A, 200W Max
• Car Port: 12V 10A, 120W Max
• Wireless: 15W Max
• AC+DC Total Output: 700W max

Battery Information

• Battery Type: Lithium Iron Phosphate (LFP)
• Protection Type: High temperature protection, low temperature protection, overload protection, over-discharge protection, over-voltage protection, short circuit protection, over-current protection.

Environmental Operating Temperature

• Charging Temperature: 0°C ~ 40°C (32°F ~ 104°F)
• Discharge Temperature: -10°C ~ 40°C (14°F ~ 104°F)
• Storage Temperature: -20°C ~ 40°C (-4°F ~ 104°F) *Recommended: 20~30°C
• Operating Humidity Range: 10-90%

Certification

CE, FC, ROHS, IC

3. User Guide ?

3.1 Product Appearance Introduction

The front panel of the ALLPOWERS R600 features various ports and displays:

• Car Port Output: For DC output via a car charger socket.
• Power On/Off: Button to turn the unit on or off.
• LED light On/Off: Button to control the LED light.
• LCD Display: Shows battery status, input/output power, remaining time, and fault codes.
• LED light: Integrated light.
• Wireless Charger: Built-in wireless charging pad (15W).
• Overload protector: Indicates overload status.
• AC*2 Output: Two AC outlets for powering devices.
• AC On/Off: Button to enable/disable AC output.
• USB-A Output*2: Two standard USB-A ports.
• USB-C Output*2: Two USB-C ports.
• DC On/Off: Button to enable/disable DC output.
• AC Input: Port for AC charging.
• Solar Input: Port for solar panel charging (XT60 connector).

3.2 Display Icon Introduction (Touch) ?️

3.3 AC Charging

The AC charging utilizes AP-POWER rapid charging technology and PowerCan regulation, supporting Fast, Standard, and Mute modes. Mute mode offers 100W charging. The default custom charging mode is Mute. It is recommended to use the original AC charging cable. Using unofficial cables may void warranty and cause damage. Ensure your home's electrical line can support 10A current. If conditions are not met, switch to Standard mode or Mute charging.

*To prevent low voltage issues, please charge within 24 hours if the power is below 5%.

AC Charging Connection: Connect the AC charging cable to the AC input port on the power station and a wall outlet.

3.4 Solar Charging ☀️

Users can charge the product by connecting solar panels in series. Ensure the solar panel's output voltage is within 12-60V, with a maximum current of 8A and a maximum charging power of 220W. Connect the solar panel to the Solar Input port (XT60 connector).

Solar Charging Setup: Connect the ALLPOWERS Solar Panel (XT60 220W, 12-60V) to the Solar Input port.

3.5 UPS Function (Uninterruptible Power Supply) ⚡UPS

This product supports UPS functionality. Connect the power grid input to the AC input port via the AC charging cable. Connected electrical appliances can use the AC output port. In this mode, AC power comes directly from the grid, not the battery. If the mains power is cut off, the product automatically switches to battery power within 10ms. For safety, it's recommended to use only one device at a time to avoid overloading the power station. If the power station malfunctions or data is lost due to improper operation, the company is not liable.

Note: When AC charging and AC output are active, the UPS function icon will illuminate. When using the UPS function, ensure your home's circuit can support 5A (220-240V) or 10A (100-120V) current.

Normal Operation: When fully charged, mains power directly supplies the device.

Power Outage: If mains power is cut off, the R600 automatically powers the device using its battery.

3.6 App Operation Guide ?

3.6.1 App Download

Scan the QR codes below using your mobile phone to download and install the app:

• iOS QR Code: [QR code description: leads to iOS App Store]
• Android QR Code: [QR code description: leads to Google Play Store]

3.6.2 Power Station Bluetooth Connection

1. Confirm that the power station and your mobile phone's Bluetooth are enabled.
2. Tap the Bluetooth icon on the device's app interface to enter the Bluetooth connection screen.
3. Tap to scan and search for a power station.
4. Select the corresponding power station and tap to connect.
5. Upon successful connection, "AP R600 V2.0" will be displayed on the device's Bluetooth bar.

3.6.3 Mobile App Operation Instructions

The mobile app provides control and monitoring of the power station:

• Display Output Remaining Time: Shows the estimated time the battery can power connected devices.
• Display Remaining Battery Capacity: Shows the current battery percentage (e.g., 90%).
• Display Input Power: Shows the power being received by the station (e.g., from AC or solar).
• Display Output Power: Shows the total power being delivered to connected devices.
• AC Switch: Toggle to turn AC output on or off.
• DC Switch: Toggle to turn DC output on or off.
• LED Light Switch: Toggle to turn the LED light on or off.
• Frequency Switching Options: Select between 50Hz or 60Hz output.

Settings:

• Work Mode: Allows setting charging modes (e.g., Standard, Mute).
• ECO Mode: Enables power-saving mode.
• Shutdown Times: Configure automatic shutdown timers.

4. FAQ ❓

1. Q1: What type of battery does the product use?
   A1: This product uses high-quality Lithium Iron Phosphate (LFP) batteries.
2. Q2: What devices can the R600 power?
   A2: The AC output port has a rated power of 100-120V 600W (1200W surge) or 220-240V 600W (1200W surge), capable of powering most home appliances. Ensure the total power consumption of connected devices is below the rated power.
3. Q3: How do I know how long the product can provide power?
   A3: The LCD screen will display the remaining battery life, which can be estimated for devices with stable power consumption.
4. Q4: How do I know if the product is charging?
   A4: During charging, the LCD screen will display the remaining charging time, and the battery circle will show a breathing animation.
5. Q5: How do I clean the product?
   A5: Wipe the product with a dry, soft, clean cloth or paper towel.
6. Q6: How should I store the product?
   A6: Before storing, discharge the product. Store it in a dry, ventilated place at room temperature. Do not place it near water. For long-term storage, discharge the battery to 30% and recharge to 60% every three months to prolong its lifespan.
7. Q7: Can this product be taken on an airplane?
   A7: No.
8. Q8: Can the R600 be charged while in use?
   A8: Yes, the product supports simultaneous charging and discharging.
9. Q9: Is the actual output capacity of the product consistent with the target capacity in the manual?
   A9: The capacity indicated in the user manual is the rated capacity of the battery pack. Due to efficiency losses during charging and discharging, the actual output capacity may be slightly lower than stated in the manual. The display shows input power.
10. Q10: How do I turn the power station's Bluetooth on/off?
    A10: Bluetooth is disabled by default. The icon disappears when it is off. (Refer to app guide for activation).
11. Q11: How do I turn on the button beep sound?
    A11: The button beep sound is disabled by default. (Refer to app guide for activation).

5. Troubleshooting ?️

Error codes are displayed on the screen. Refer to the table below for related error types and recovery methods:

6. Package Contents ?

The package includes:

• ALLPOWERS R600 Portable Power Station
• AC Charging Cable
• User Manual and Warranty Card

[Image description: Diagram showing the ALLPOWERS R600 unit, an AC charging cable, and a booklet labeled "User Manual and Warranty Card".]

7. Declaration ?

Before using this product, please read the user manual thoroughly to ensure correct operation. Improper use may cause serious injury to yourself or others, or damage to the product and property. By using this product, you acknowledge and accept all terms and contents of this document. The user is responsible for their actions and all consequences thereof. ALLPOWERS is not responsible for any losses caused by the user's failure to use the product in accordance with the user manual.

In accordance with laws and regulations, the Company reserves the right of final interpretation of this document and all related product documents. If updated, revised, or closed without notice, please visit the official ALLPOWERS website for the latest product information.

This product is not intended for use in applications requiring extremely high reliability and safety, such as aerospace equipment, trunk communication equipment, nuclear energy control equipment, and medical equipment. Please judge the suitability of this product and its use case yourself. If this product is used in the aforementioned equipment, ALLPOWERS will not be held responsible for any personal injury, fire, or equipment malfunctions caused by the failure of this product.

8. Contact Us ?

For any questions or assistance with our products and services, please email us at: support@allpowers.com

Our official website: www.allpowers.com