USER MANUAL

Product Overview

Please read the user manual carefully before using the product and keep it properly.

For video instructions and customer support, scan the QR codes provided.

Video instruction: Scan the QR Code to view the Video Manual, which makes VD01 easier to setup and use.

Customer Service: Scan QR Code to enter your question, to realize your 1-year warranty or help you arrange the replacement.

Product Illustration

The VD01 body camera features the following components:

• (1) LED Fill Lights
• (2) High definition camera
• (3) Monitor
• (4) Right flip-flop
• (5) Left flip-flop
• (6) Confirmation key
• (7) Horn
• (8) Microphone
• (9) Quick Record Button
• (10) LED Indicator light
• (11) Record button
• (12) ON/OFF button
• (13) Reset hole
• (14) Flip key/WiFi on key
• (15) Voice recording button
• (16) Fill light key/Screensaver key
• (17) Micro SD card slot
• (18) Data/Charging Interface

Icon Introduction

Understanding the icons on the display:

• (1) Video ON Indication
• (2) Video mode icon
• (3) Loop recording ON icon
• (4) Motion detection ON icon
• (5) Fill light ON icon
• (6) Video tape recording indication
• (7) Recording time (Red) / Memory card remaining time (White)
• (8) Video resolution indication
• (9) System time display
• (10) Battery level display

Quick Guide

Ensure the memory card is inserted before use.

• Power On: Long press the "<0xE2><0x97><0x8B>" button. (LED Indicator: long RED light - standby mode)
• Start Recording: Short press the "<0xE2><0x96><0xAB>" button. (RED recording time displayed in the upper right corner. LED flashes and then turns off - recording mode)
• Stop Recording: Short press the "<0xE2><0x96><0xAB>" button again. (White remaining recording time displayed in the upper right corner. Enter standby mode)
• Voice Recording: Short press the "<0xF0><0x9F><0x94><0x8A>" button to enter the recording interface, and short press again to Start/Stop recording.

Album & Replay

In standby mode, short press the confirmation button "<0xE2><0x97><0x8B>" to enter the album. Use the "<0xE2><0x97><0x80>" "<0xE2><0x96><0xB6>" left and right buttons to select video or recording.

Fast-forward & Delete Recordings:

• Short press the confirmation button "<0xE2><0x97><0x8B>" to play video or recording. "<0xE2><0x96><0xB6>" adjusts fast forward (x2, x4, x8).
• Long press the confirmation button "<0xE2><0x97><0x8B>" to delete the current file.

Return to Previous Level

Short press the power button "<0xE2><0x97><0x8B>" to return to the previous interface.

Go to Setting

In standby mode, long press the confirmation button "<0xE2><0x97><0x8B>" to enter the settings.

LED Indicators

Main Function Introduction

1. Quick Video Recording

   In any mode (except hot spot mode), push up the "<0xF0><0x9F><0x94><0x8A>" key to enter the fast recording mode, and press down the "<0xF0><0x9F><0x94><0x8A>" key to save the video and return to the recording standby mode.

   How to realize one key start recording: Toggle the slide switch upwards first, then press and hold the power button to turn on the machine. The camera will auto start recording after it has been ON. In WiFi mode, the Force video recording button is not effective.

2. Image Mirroring

   In standby mode, long press the "<0xE2><0x97><0x8B>" key to enter the Settings, select the item "Image Mirror" in the Settings menu, and enable/disable the picture mirror function (valid only for selfies).

3. Motion Detection

   Long press the "<0xE2><0x96><0xAB>" button in the video mode to enter the motion detection mode. If object movement is detected, the video will start. If object movement is not detected, the video will stop automatically. Long-press "<0xE2><0x96><0xAB>" to exit motion detection recording. (Once motion is detected, recording will be for a minimum of 1 minute without movement).

4. Loop Recording

   Auto loop recording: when the disk is full, continued recording will overwrite the previous video. "Stop Loop" means auto stop recording after the card has been full.

5. Car Mode

   Start the car mode. USB power on will automatically turn on and start recording. USB power off will save the video and turn off the computer.

6. Fill Light Switch

   In any mode with power on, long press the "<0xF0><0x9F><0x91><0x80>" key to turn on the LED light, and long press the "<0xF0><0x9F><0x91><0x80>" key again to turn off the LED light.

7. Light up/ down the screen

   In any mode with power on, short press "<0xF0><0x9F><0x91><0x80>" to close the screen, and short press any key to light up the screen.

8. Image Flip

   The default back clip direction of the image. If you need to rotate the lens for shooting, press "<0xC2><0xB0>" to adjust the image.

9. Reset

   When the machine crashes and the key is invalid, it cannot be used normally. Insert the point of the "reset hole" with the reset pin provided to reset the machine. It can be used normally after the reset.

WiFi Connection

Please use the QR code to download and install "Viidure", or search and download "Viidure" in Google Play or App Store.

WiFi Switch:

In standby mode, long press the "<0xC2><0xB0>" Left-first key to turn on/off WiFi and enter/quit the WiFi mode.

WiFi connection:

Search and connect to the network named WiFi_ (such as WiFi_44BA) in the WiFi Settings of your mobile phone or tablet. After successful connection, open the "Viidure App" to enter the main interface and click "Continuous Recorder" to enter the real-time preview interface.

Wi-Fi Mode State: If your phone shows "No Internet Connection" while connected to the camera's Wi-Fi, this is normal and does not affect the connection. Follow these steps if your phone disconnects constantly:

1. Re-download the app and ensure you allow Wi-Fi usage. This prevents the app from being unable to connect to the internet.
2. Choose to "still connect" to this no-internet Wi-Fi when you turn on the hotspot mode of the camera. Otherwise, the connection will stop constantly as you do not offer permission to keep it connected.

Key Function Introduction

Methods of Lens Usage

This product's lens can be rotated 180°. The usage can be adjusted according to the needs of the angle as shown:

[Image: Camera with lens rotated 180 degrees, showing front view.]

[Image: Camera with lens rotated 180 degrees, showing side view.]

[Image: Camera with lens rotated 60 degrees, showing front view with LED lights.]

Installation of MicroSD Card

As shown in the figure:

[Image: Close-up of the camera showing the MicroSD card slot.]

Insert the TF card as shown, avoid the card getting stuck in the card slot.

Supports 4-256GB.

Timestamp Setting

Power on the device and be in standby mode.

• Long press the "<0xE2><0x97><0x8B>" key to enter the setting.
• Select the "Date/Time" item in the setting menu.
• Use the left and right keys "<0xE2><0x97><0x80>" "<0xE2><0x96><0xB6>" to adjust the time.
• Finally, press the confirm "<0xE2><0x97><0x8B>" key to complete the time setting until back to setting.

Charging & Data Transfer

Connect the provided cable with a 5V 1A/2A adapter or power bank to charge the device. (BLUE Solid while charging, and off after fully charged).

Connect the provided cable with a computer to read the data. (A new flash-disk will show. Open the disk to view the files).

Use the card reader provided to recognize the card taken out from the camera with the computer.

High-frequency Questions

1. Screen Protector/Automatic Shut-Down Mode:

   The Screen/Cam will default to auto turn Off in 1 minute if there are no operations. This can be closed or changed in the menu.

2. How to realize one key start recording:

   Toggle the slide switch upwards first, then press and hold the power button to turn on the machine. The camera will auto start recording after it has been ON.

3. Manual Control the screen:

   You can short-press the "left-third" button to manually control the screen's ON/OFF, regardless of whether the camera is recording.