Viidure N8 Dashcam User Manual

Table of Contents

• Connection Process
• Important Notes
• N8 Appearance
• N8 Boot-up Guide
• Package Contents
• Power Supply Accessories
• Homepage Status Descriptions
• Settings Interface Description
• Playback Interface Description
• Installation Guide Description
• Introduction to the APP Interface
• Viewing Files in the Dashcam
• Dash Cam Hardwire Kit Installation Guide
• Safety Warnings
• About the Micro SD Card

Connection Process

1. Android:

On your Android phone, use a browser with a QR code scanning function (e.g., Edge, Opera) to scan the QR code and download "Viidure". Grant all necessary permissions.

2. iOS:

On your iPhone, use the built-in camera to scan the QR code. Click the yellow button that appears on the camera interface below the QR code to download it from the Apple App Store.

Download Viidure App: You can also search for and download "Viidure" in the Android Store or Apple App Store. Remember to allow all permissions.

Instructions for connecting to Wi-Fi:

1. Tap the '+' icon in the upper right corner of the app's home screen and proceed to the next step for Wi-Fi connection.
2. Turn on the dashcam and go to its settings to activate the Wi-Fi hotspot. On your phone, connect to the hotspot signal starting with "N8-******". If a message appears stating that the Wi-Fi cannot access the internet, click "Connect". After connecting to the hotspot, return to the app's homepage to complete the connection.

QR Codes for Connection:

• N8 Connect to WLAN - Operating Instructions
• N8 Dashboard Camera Installation Video
• Hardwiring Kit Installation Video
• Email
• Whatsapp

Important Notes

Before installing the dashcam, please remove the protective film from the front and back of the lens and apply the included static cling film to the car window.

Hardwire-Kit (Required for parking monitoring function): (Not included in the package, please purchase separately if needed.)

N8 Appearance

Control Panel Buttons and Function Descriptions:

• M Button:
  • Short press on the preview interface to enter the main menu.
  • Short press in the main menu to return to the preview interface.
  • Short press in the menu/settings/file search to go to the previous menu.
  • Long press on the preview interface to switch to Wi-Fi connection.
• Up Button:
  • Short press on the preview interface to enter the file search interface.
  • Short press in the main menu to navigate up.
  • Short press in menu settings to select the previous menu option.
  • Short press in the file search interface to select the previous video file.
  • During video playback pause, short press to switch to the previous video file.
  • Short press on the recording interface to start video playback.
• Power Button:
  • Short press on the preview interface to turn the screen on/off.
  • Long press the power button for 3 seconds to turn off the device when it is on.
  • Short press the power button to turn on the device when it is off.
  • Select a file in the video playback interface and press to delete the file.
• Down Button:
  • Short press on the preview interface to enter the file search interface.
  • Short press in the main menu to navigate down.
  • Short press in menu settings to select the next menu option.
  • Short press in the file search interface to select the next video file.
  • When video playback is paused, short press to switch to the next video file.
  • Short press on the recording interface to lock the current video.
• OK Button:
  • Short press on the preview interface to switch between front recording, rear recording, and split-screen display.
  • Short press in the menu interface to enter menu settings.
  • Short press in menu settings to save settings.
  • Short press in the file search interface to play the selected video file.
  • Short press during video playback to pause playback.
  • Short press during playback pause to resume playback.

N8 Boot-up Guide

Included Accessories:

• N8 4K Dashcam
• 3M Adhesive
• Power Cable Type C
• 1080P Rear Camera
• Auto Cable Trim Tool
• User Manual
• Dust-Free Cloth
• Electrostatic Sticker
• Cable Clips
• TF Card

Package Contents

The N8 4K Dashcam comes with the following accessories:

• N8 4K Dashcam
• 3M Adhesive
• Power Cable Type C
• 1080P Rear Camera
• Auto Cable Trim Tool
• User Manual
• Dust-Free Cloth
• Electrostatic Sticker
• Cable Clips
• TF Card

Power Supply Accessories

1. Auto Charger Cable: A standard car charger cable for powering the device.
2. Hardwire Kit (Required for parking monitoring function): (Not included in the package, please purchase separately if needed.) Asin: BODHSBH9KS

Homepage Status Descriptions

The dashcam's recording screen displays various status indicators:

• Micro TF Card Status: Indicates whether a Micro TF card is inserted or not.
• Recording Status: Shows normal recording or emergency recording status.
• GPS Status: Indicates successful positioning or positioning error.
• Date and Time: Displays the current date and time.
• Recording Screen: Shows the live view from the camera.
• Speed and Direction: Displayed after successful GPS positioning.
• MIC Status: Indicates whether the microphone is on or off.

Settings Interface Description

Press the menu button on the side of the screen to access the settings menu.

• W-LAN: Enables Wi-Fi connection. Download the product app first. Scan the universal QR code for Android/iPhone. For Android, open with your browser and download. For iPhone, it directs you to the App Store. After downloading the app, turn on the dashcam's Wi-Fi function. The Wi-Fi name and password will be displayed on the Wi-Fi screen. Open the app, select "Connect to Dashcam", find the corresponding Wi-Fi name, and enter the password to connect. You can then view recorded videos and parameters in the app.
• Resolution: Offers resolution options: 1080P, 2K, and 4K. 2K is the default. 4K provides clearer videos but requires more storage.
• Loop Recording: Allows selection of loop recording duration: 1 minute, 3 minutes, or 5 minutes. 1 minute is the default.
• Audio Recording: Enables or disables the audio recording function. Default is enabled.
• Light Frequency: Options for light frequency: 50 Hz and 60 Hz.
• Mirror/Flip: Options for rear-view mirror imaging and 180° mirror rotation.
• Screen Saver: Set screen saver to Off, 1 minute, 2 minutes, or 3 minutes. Default is Off.
• Volume: Adjust speaker volume to Off, Low, Medium, or High. Default is High.
• G-Sensor: Adjust G-Sensor sensitivity (Off, Low, Medium, High). Default is Off.
• Language: Select the desired language.
• Time Settings: Set the current date and time.
• Time Zone: Select the appropriate time zone.
• Speed Unit: Choose between km/h or mph. Default is mph.
• GPS Watermark: Enable or disable GPS watermark. Default is enabled.
• GPS Information: View current GPS signal strength.
• Storage: View TF card usage. Format the TF card by selecting the confirmation icon. It is recommended to format the TF card every 2-3 weeks and use a Class 10 or higher card.
• Format Reminder: Enable or disable reminders to format the TF card. Default is enabled.
• Factory Reset: Reset the device to factory settings.
• Software Version: View the current device software version.
• Installation and Warranty: Scan the QR code for installation assistance and warranty registration.

Playback Interface Description

From the video recording interface, short press the Up button to enter the playback interface.

• Video File: Displays video files.
• Image File: Displays image files.
• Multi-selection: Select multiple files at once.
• Locked Video File: Indicates a video file that is locked.
• Front/Rear Switch Icon: Switch between front and rear recording.
• Back Icon: Return to the recording interface.

Select a video file name and short press the OK button to enter the playback interface for that video. The video will play automatically. Press the OK button to play/pause the video. After playback, it will automatically proceed to the next video file. Short press the Menu button to return to the playback list interface.

Installation Guide Description

Hidden Wiring: Illustrates how to route the cables discreetly.

Auto Charger - Power Supply: Shows the connection point for the car charger.

Important Notes for Installation:

1. Before installation, turn on the device to check if all functions are normal. Do not pull the cables forcefully during installation. Ensure that the terminal connections are not incorrectly connected, plugged in, or swapped.
2. If functions and display are abnormal after installation, it is likely due to installation issues. Check for short circuits in the wiring or bent/shorted terminals.
3. It is strictly forbidden to damage or alter the original wiring circuits during vehicle installation. If the wiring is damaged during installation, the entire set of new wiring must be replaced and installed before powering on the vehicle.

Introduction to the APP Interface

(The interface may vary depending on the operating system but will function similarly.)

Viewing Files in the Dashcam:

Tap the folder icon to access the main folder interface. Press and hold any video file to edit it as described below.

• Take Photo: In photo mode, tap the icon to take a picture.
• Video Recording: In video mode, tap the icon to start recording.
• View Video Files
• View Image Files
• Access Settings Menu
• Check downloaded video and image files
• Share files with family and friends on SNS
• View preview in full-screen mode

Download/Delete Files:

• Select a picture or video and tap this icon to download it to your phone.
• Select a picture or video and tap this icon to delete it.
• Cancel: Tap to exit.

Viewing Files in the Dashcam

Collision Sensing: Select between Low, Medium, or High sensitivity.

Low Voltage Regulation: Set a target voltage. The dashcam will automatically shut down to protect the car battery if the voltage drops below this level.

Parking Monitoring Collision Detection: Adjust collision sensitivity or turn it off while parking.

Parking Recording Time: Select the duration for parking monitoring.

Wi-Fi SSID: Change the Wi-Fi SSID/name.

Firmware Version: Check the firmware version.

Format Memory Card: Format the TF card.

Restore Factory Settings: Restore factory settings.

Audio Recording: Enable/disable audio recording during video recording.

Speaker Volume: Adjust speaker volume using the slider.

Startup Tone: Enable/disable the startup tone.

Video Resolution: Select between 4K/2K.

Recording Time: Select between 1/3/5 minutes.

Frequency: Select between None or 50/60.

Video Encoder Format: Select between H264/H265.

Left/Right Mirroring: Enable/disable left and right mirroring.

Flip Upwards: Enable/disable the flip function.

Dash Cam Hardwire Kit Installation Guide

Function of the Dash Cam Hardwire Kit

The typical voltage in a car is 12V, while the universal voltage for dashcams is 5V. The Hardwire Kit reduces the voltage from 12V in the car to 5V for use by the dashcam.

For 24-hour parking mode, a power connection via the Hardwire Kit is required (collision detection and time-lapse video duration).

Warning:

Incorrect connection of the Hardwire Kit can lead to the parking mode being inoperable and damage to the car battery. Hardwire Kit Installation Method: Connect to the vehicle's continuous power fuse. Yellow wire > B+; Red wire > ACC; Connect to the positive terminal of the car battery (controlled by the ignition switch). Black wire > Ground; Ground (attach to the screw in the fuse box).

Installation Method for Hardwire-Kits:

1. When selecting an installation location, ensure that the Hardwire Kit can be connected to the car's power source without obstructing the driver's view or interfering with driving operations.
2. Before starting the installation, disconnect the power supply to avoid electrical malfunctions or damage to the vehicle.
3. Connect the red wire of the Hardwire Kit cable to the ACC in the fuse box, the yellow wire to the vehicle's continuous power source, and the black wire to the ground (use a test pen during the installation process to confirm connections).
4. Reconnect the car to the power supply, start the engine, and ensure the dashcam is functioning correctly.

Note:

During wiring, protect the vehicle's internal wiring to ensure the normal operation of other devices. If you are unsure about your actions, we recommend seeking assistance from a qualified professional.

FQA:

1. How to activate Park Mode: Park mode is activated via the dashcam's settings menu. Access the dashcam's settings menu, find the "Collision Detection" option, and enable it.
2. My Dashcam is not recording videos after parking. What should I do?
   • Ensure that it is correctly connected to both the continuous power supply (BAT) and the ignition power supply (ACC).
   • Check Dashcam Settings: Ensure that Park Mode is enabled in the settings menu.
   • Voltage Test: Use a multimeter to measure the output voltage of the Hardwire Kit. Ensure the output voltage is stable and meets the dashcam's requirements.
3. Problems with the Hardwire Kit: If the above checks are satisfactory, the Hardwire Kit may need to be replaced.
4. How long can recordings be stored in Park Mode? The recording time depends on the memory card capacity and recording mode. In Parking Detection and Gravity Sensing modes, recording only occurs when an event is detected, leading to longer storage times. Time-lapse videos have smaller recording files and can be stored for longer periods. It is recommended to use a high-capacity memory card and regularly clean or back up recordings.
5. Where can I view recordings in Park Mode? Recordings in Park Mode are typically stored on the dashcam's memory card and can be viewed in the following ways:
   • Dashcam Playback: Long press the Menu button to access the playback interface. Recordings are saved in a locked file.
   • View on Computer: Remove the memory card, insert it into a card reader connected to a computer, and open the playback folder in the file manager.
   • Mobile App: Activate the dashcam's Wi-Fi function, connect to your phone's Wi-Fi, open the Viidure app, and view playback files.

Safety Warnings

Video (Audio) files recorded with this product may not be used without the consent of the copyright holder, except for personal use. Information on the built-in battery (built-in or not depending on the model).

When using a product with a battery:

You must follow these rules:

• Do not modify or disassemble the product.
• Do not heat or throw the product into fire.
• Do not expose the product to heat for extended periods, such as direct sunlight or high-temperature environments. This behavior can lead to fires and personal injury.

When disposing of built-in battery components:

You must follow these rules:

• Do not throw the battery into fire or water, and do not heat it.
• Do not expose the battery to direct sunlight.
• Apply insulating tape to the battery terminals.
• These actions can cause fire, explosion, battery fluid leakage, and personal injury.

When disposing of built-in battery components, you must also consider the following:

• Keep out of reach of children.
• Seek medical attention if battery fluid gets into your eyes.
• This behavior can lead to fire, explosions, battery fluid leakage, and injuries.

When installing this product:

• Do not install this product in vehicles that are not equipped with an electronic DC12V/24V system (with ground cable).
• Connecting this product to a power source that is not DC12V/24V may cause fires and other malfunctions.
• Do not install or wire in a location that obstructs airbag function. This can lead to airbag malfunction and fatal accidents.
• Never use screws or nuts for car safety parts (steering, brakes, fuel tanks, etc.). This can lead to traffic accidents.
• Do not install in locations that obstruct visibility or driving, or that could pose a danger to passengers.

Please read this manual and install it correctly.

• Before installation, confirm the position of pipes, tanks, and electrical system wiring.
• Ensure you do not conflict with pipes, tanks, electrical lines, etc., when drilling a hole for installation.
• Use only the parts included in the package or recommended parts. Other parts may cause accidents, malfunctions, or fires.
• If it wraps around the steering wheel, gear shifter, brake pedal, etc., it can lead to a traffic accident.
• When wiring, ensure the cable does not get caught in moving parts like the car body or seat.
• Ensure the cable does not get caught in moving parts like the car body or seat.
• Insulate the exposed part of the cable with tape or similar.
• We recommend seeking professional help for installation and wiring. Incorrect installation or wiring can cause severe damage to the car and lead to traffic accidents.
• Do not install this product in vehicles not equipped with an electronic DC12V/24V system (with ground cable).
• Before installation, connect the parts of this product and turn it on to check if it functions properly. This way, you can more easily request a refund or replacement if you find a defect or malfunction.

About the Micro SD Card

• When needed, insert the memory card into the slot using the edge of a small coin (or similar object). Ensure the card is inserted correctly. A second press inwards will release the memory card.
• Do not remove or insert the memory card when the dashcam is turned on, as this can damage the memory card.
• Format the memory card regularly. We recommend formatting the memory card every 2-3 weeks. This will delete all files from the card and set it up for further use with your dashcam. Of course, only do this after downloading all files you wish to keep from the SD card, as formatting will erase all content.
• Be careful when removing the SD card from the dashcam if it is installed in the vehicle. Due to the card slot mechanism, the card may spring out of the slot upon release.
• To format your memory card before using the dashcam: This ensures the card is structured specifically for your camera.
• Press to access settings, and select the storage option. Then follow the on-screen instructions.

Contact Information

Manufacturer: Shenzhen Jiedu Technology Co., Ltd.

Address: Jiedu Industrial Park, No. 29, Baigonggao Industrial Zone, Guanlan, Longhua District, Shenzhen, China

FCC WARNING

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To comply with FCC RF exposure guidelines, this equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. Use only the supplied antenna.