Harbor Breeze LED Well Light Installation and Troubleshooting

Product Information

Item/Article #: 0688459, 4902876

Model #: ZDL1138-LED6.5K8030, ZDL1138-L6.5K8030B

Product Type: LED Well Light Luminaire

Brand: Harbor Breeze

Estimated Assembly Time: 10 minutes

Tools Required (Not Included): None specified.

Preparation

Before starting assembly, ensure all parts are present. Compare parts with the package contents list. Do not attempt to assemble if any part is missing or damaged.

For more information, visit Lowes.com, search the item number, and refer to the Guides & Documents tab.

For questions or problems, contact customer service at 1-888-251-1003 (8 a.m. - 8 p.m., EST, Monday - Sunday), partsplus@lowes.com, or visit www.lowespartsplus.com.

Troubleshooting

Problem: The light does not turn on at night.

• Possible Cause 1: The transformer is not plugged in or turned on.
• Corrective Action 1: Ensure the transformer is plugged in and turned on.
• Possible Cause 2: Fixture connector is not properly installed on the low voltage cable.
• Corrective Action 2: Ensure the contact pins pierce the wire insulation and make proper contact with the wire.

Care and Maintenance

Clean the lens, lamp head, and lamp stand regularly with a non-abrasive cleaner. Warning: Always ensure the light is unplugged and completely cool before cleaning.

Warranty

This fixture is warranted against defects in materials and workmanship for five (5) years from the original purchase date. Contact 1-888-251-1003 for a Return Authorization number and instructions. The manufacturer is liable for replacement of defective items.

Safety Information

Read and understand the entire manual before assembly, operation, or installation.

• This product is not a toy and must not be operated by children.
• Do not connect this fixture to an electrical system that does not provide a means for equipment grounding.
• Do not submerge in water; the product can be damaged.
• Use with 18AWG minimum, underground low-voltage circuit cord.
• The wire is intended for shallow burial, less than 6 inches deep.
• Risk of Electric Shock: Install all luminaires 10 ft. or more from a pool, spa, or foundation.
• Keep lamp away from material that may burn.
• Do not touch hot lens, guard, or fixture housing.
• Do not operate or install a fixture with missing or damaged parts.
• Do not touch the LED at any time, as this may cause damage to the fixture.

Installation Overview

1. Dig a hole for fixture (A) according to the dimensions shown (5.12 in / 13 cm). Insert fixture (A) into the hole, securing with excess dirt or decorative rock/stones (not included).

2. Connect the low-voltage transformer (sold separately) to the wire guide by twisting the wire into each end of the wire guide. Align the pins on the connector top cover so that each pin lines up with opposite sides of the wire. Securely tighten the connector top cover, ensuring the pins completely pierce the plastic shield of the wire.

Package Contents

• Fixture (A) x1

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. The user is encouraged to try to correct interference by:

• Reorienting or relocating the receiving antenna.
• Increasing the separation between the equipment and the receiver.
• Connecting the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consulting the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.