Harbor Breeze LED Deck Light

Introduction

Thank you for purchasing this Harbor Breeze product. These instructions are designed to be easy to follow, allowing you to enjoy the product quickly. For additional information, visit Lowes.com, search the item number, and refer to the Guides & Documents tab on the product's page.

For questions or issues, contact customer service at 1-888-251-1003 (8 a.m. - 8 p.m. EST, Monday - Sunday), or email partsplus@lowes.com, or visit www.lowespartsplus.com.

Preparation

Before beginning assembly, ensure all parts are present by comparing them with the package contents list. Do not attempt assembly if any part is missing or damaged.

Estimated Assembly Time: 10 minutes.

Tools Required: Not included (implied by diagrams for installation).

For more information, visit www.lowes.com.

Troubleshooting

Care and Maintenance

Clean the lens, lamp head, and lamp stand regularly with a non-abrasive cleaner. Warning: Always ensure the flood light is unplugged and completely cool before cleaning.

Warranty

This fixture is warranted against defects in materials and workmanship for five (5) years from the original purchase date. For warranty service, call 1-800-643-0067 to obtain a Return Authorization number and further instructions. The manufacturer is liable for replacement of defective items but not for other losses, damages, or injuries caused by the product.

Safety Information

Please read and understand this entire manual before attempting to assemble, operate, or install the product.

General Precautions:

• This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: it must not cause harmful interference, and it must accept any interference received.
• This equipment has been tested and found to comply with Class B digital device limits per FCC Rules, designed for reasonable protection against harmful interference in residential installations.
• Changes or modifications not expressly approved by the responsible party could void the user's authority to operate the equipment.
• This product is not a toy and must not be operated by children.
• Do not connect this fixture to an electrical system without a means for equipment grounding.
• Do not submerge in water; the product can be damaged.
• Use with 18AWG minimum, underground low-voltage circuit cord.
• The wire is intended for shallow burial, less than 6 inches deep.
• Install all luminaires 10 feet or more from a pool, spa, or foundation.
• Keep the lamp away from materials that may burn.
• Do not touch hot lens, guard, or fixture housing.
• Do not operate or install a fixture with missing or damaged parts.
• Do not touch the LED at any time, as this may cause damage to the fixture.

Interference Correction Measures:

If the equipment causes radio or television reception interference, try one or more of the following:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from the receiver's circuit.
• Consult the dealer or an experienced radio/TV technician for help.

Package Contents

• Item A: LED Deck Light Fixture (1 piece)
• Item B: Mounting Cleat (1 piece)

Hardware Contents

• AA: Screws (2 pieces)
• BB: Screws (2 pieces)
• CC: Wire Connector (1 piece)
• DD: Screws (2 pieces)

Installation Overview

Follow these steps for installation:

Step 1: Surface Mounting (Wood or Masonry)

Install the fixture (A) to a wood installation site without the cleat (B). Alternatively, install the fixture (A) to a masonry installation site without the cleat (B). This step typically involves using screws like AA and DD.

Step 2: Landscape Hardscape Mounting

Install the fixture (A) to landscape hardscape surfaces using the cleat (B) and hardware (BB).

Step 3: Wiring Connection

Insert the wire from a low-voltage transformer (sold separately) into the wire guide. Twist the wire into each end of the wire guide. Align the pins on the connector top cover with the opposite sides of the wire. Securely tighten the connector top cover, ensuring the pins completely pierce the wire's plastic shield.