Sealey VS7100 Engine Oil Funnel

Model No: VS7100

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT:

PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1. SAFETY

• ? Wear eye protection
• WARNING! Ensure Health and Safety, local authority and general workshop practice regulations are adhered to when using tools.
• DO NOT use tools if damaged.
• Maintain tools in a good, clean condition for best and safest performance.
• Wear approved eye protection. A full range of personal safety equipment is available from your Sealey stockist.
• Wear suitable clothing to avoid snagging. DO NOT wear jewellery and tie back long hair.
• Keep children and unauthorised persons away from the work area.
• When not in use, store in a secure, childproof location.

2. INTRODUCTION & APPLICATIONS

A completely new design of oil tunnel that fastens and seals into the engine filler. Hands free operation with no mess or spills.

FUNNEL WITH M37 X P3.0 THREADS

FUNNEL WITH CLIP TYPE ADAPTER

4. INSTRUCTIONS

Locate and remove oil filler cap (if unsure, consult vehicle handbook for location) and lock VS7100 funnel in place using the bayonet fixing previously occupied by the filler cap.

Funnel Images:

Image 1: A close-up view of the Sealey VS7100 engine oil funnel, highlighting its bayonet fitting mechanism.

Image 2: The Sealey VS7100 engine oil funnel correctly fitted into an engine's oil filler neck, ready for use.

ENVIRONMENT PROTECTION

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.

Important Notes:

NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.

IMPORTANT: No Liability is accepted for incorrect use of this product.

WARRANTY: Guarantee is 12 months from purchase date, proof of which is required for any claim.

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR

Phone: 01284 757500

Email: sales@sealey.co.uk

Website: www.sealey.co.uk