Sealey VS7100 Engine Oil Funnel

Product Overview

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble-free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1. Safety

• ? Refer to instruction manual
• ?️ Wear eye protection
• WARNING! Ensure Health and Safety, local authority and general workshop practice regulations are adhered to when using tools.
• DO NOT use tools if damaged.
• Maintain tools in a good, clean condition for best and safest performance.
• Wear approved eye protection. A full range of personal safety equipment is available from your Sealey stockist.
• Wear suitable clothing to avoid snagging. DO NOT wear jewellery and tie back long hair.
• Keep children and unauthorised persons away from the work area.
• When not in use, store in a secure, childproof location.

2. Introduction & Applications

A completely new design of oil tunnel that fastens and seals into the engine filler. Hands-free operation with no mess or spills.

Funnel with M37 X P3.0 Threads

Funnel with Clip Type Adapter

4. Instructions

Locate and remove oil filler cap (if unsure, consult vehicle handbook for location) and lock VS7100 funnel in place using the bayonet fixing previously occupied by the filler cap.

Visual Description: The Sealey VS7100 oil funnel is shown. It is a transparent plastic funnel with a blue bayonet fitting at the top, designed to securely attach to engine oil filler necks.

Visual Description: The Sealey VS7100 oil funnel is depicted attached to a car engine's oil filler neck. This illustrates the hands-free operation, allowing for mess-free oil changes without spills.

Environment Protection

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.

Note: It is Sealey's policy to continually improve products and as such, they reserve the right to alter data, specifications, and component parts without prior notice.

Important: No liability is accepted for incorrect use of this product.

Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.