HOMCOM 83A-111V80 Folding Dining Table
Product Overview
This document provides assembly instructions for the HOMCOM 83A-111V80 Folding Dining Table. Please read all instructions carefully before beginning assembly.
Parts List
| Part | Description | Quantity |
|---|---|---|
| 1 | Tabletop | 1 |
| 2 | Leaf Panel | 2 |
| 3 | Side Panel | 2 |
| 4 | Support Panel | 2 |
| 5 | Support Block | 2 |
| 6 | Connecting Piece | 2 |
| 7 | Leg | 4 |
Hardware List
| Label | Description | Quantity |
|---|---|---|
| A | 6x35mm Screw | 8 (+1 spare) |
| B | 15x9.6mm Screw | 8 (+1 spare) |
| C | 6x30mm Screw | 14 (+1 spare) |
| D | 4x12mm Screw | 60 (+2 spare) |
| E | Hinge | 6 |
| F | 6x40mm Screw | 8 |
| G | Washer | 8 |
| H | Washer | 8 |
| I | Allen Key | 1 |
| J | 4x55mm Screw | 4 (+1 spare) |
| K | Bracket | 4 |
| L | Connecting Piece | 4 |
Assembly Steps
Step 1
Attach eight screws (A) to the underside of the tabletop (1).
Step 2
Attach two side panels (3) and two support panels (4) to the tabletop (1) using eight screws (B) and eight screws (C).
Step 3
Secure the side panels (3) and support panels (4) further using twenty-four screws (D) and four brackets (K).
Step 4
Attach the four legs (7) to the assembled frame using eight screws (F), eight washers (G), eight washers (H), and one tool (I) [Allen key].
Step 5
Attach two connecting pieces (6) to the frame using two screws (C) and two pieces (L).
Step 6
Attach two support blocks (5) to the frame using four screws (C) and four screws (J).
Step 7
Attach the two leaf panels (2) to the main tabletop (1) using thirty-six screws (D) and six hinges (E).
Step 8
The table is now fully assembled. Ensure all screws are tightened securely.
Step 9: Folding Mechanism
Illustrates the folding mechanism of the table. The leaf panels (2) can be lowered or raised by pivoting them downwards or upwards, secured by internal mechanisms.
Important Note
EN: Do not confuse similar screws.
FR: Ne pas confondre des vis similaires.
ES: No confunda tornillos similares.
PT: Não confundir parafusos semelhantes.
DE: Verwechseln Sie ähnliche Schrauben nicht.
IT: Non confondere le viti simili.
Customer Support
If you have any questions, please contact our customer care center. Our contact details are below:
Phone: 001-877-644-9366
Email: customerservice@aosom.com
Importer: Aosom LLC
Address: 27150 SW Kinsman Rd, Wilsonville, OR 97070 USA
Manufactured in: CHINA
