HOMCOM 835-527 Round Dining Table Assembly and Care Instructions

Important Information

Important: Retain for future reference. Read carefully. For domestic use only.

Safety Warnings & Precautions

• Do not place the furniture in areas exposed to high heat, humidity, or direct sunlight.
• Avoid placing heavy objects on the surface to prevent structural deformation or damage.
• Ensure the floor is dry to reduce slip risks.

Assembly Guide

• Open packaging and verify all parts are included.
• Tighten feet periodically to prevent loosening.

Usage Instructions

• Maximum Load Capacity: 80kg
• Distribute weight evenly to avoid overloading one side.

Maintenance & Care

• Wooden Surfaces: Clean with dry cloths only; avoid moisture.
• Glass/Ceramic Tops: Use neutral cleaners; never apply acidic or abrasive agents.
• Store in a dry, ventilated area after cleaning; avoid humid environments.

Disclaimer

The manufacturer is not liable for injuries or damages caused by failure to comply with these instructions. Product design may be updated for technical improvements.

Parts and Hardware

Parts:

• 1. Tabletop (Round)
• 2. Legs (Set of 4)

Hardware:

• A: M6*16 Screws (16 + 1 spare)
• B: Ø6*16 Washers (16 + 1 spare)
• C: Allen Key (1)
• D: Feet (M6) (4)

Assembly Steps

Step 01: Attaching Legs

Attach the four legs (2) to the underside of the tabletop (1) using screws (A) and washers (B). Secure the connections with the Allen key (C). Ensure the feet (D) are properly attached to the bottom of each leg.

Diagram Description: The cover illustration shows a round table with four legs. Below the table image are several icons: a stopwatch indicating '10 MIN' (⏱️ 10 MIN), a person with a plus sign (?➕), a checkmark (✔️), a cross (❌), two people (?), another checkmark (✔️), and another cross (❌), representing usage or safety indicators. The assembly illustration shows the underside of the round tabletop with four leg assemblies being attached. Each leg is secured to the tabletop's mounting plates using screws and washers. An enlarged inset view details the connection points, showing a screw passing through a washer and into the leg assembly, which is then attached to the tabletop. Arrows indicate the correct placement of parts A, B, C, and D.

Step 02: Final Assembly

The table is now fully assembled and ready for use.

Diagram Description: A clear illustration of the completed HOMCOM round dining table, standing on its four legs.

Contact Information & Recycling