HOMCOM 835-491 Bar Table Assembly Instructions
Model Number: IN230100254V02_GL
Important Information
Please retain for future reference. Read carefully.
Estimated Assembly Time: ⏱️ 30 minutes
Number of Steps: 2️⃣ 2 Steps
Assembly requires 2 or more persons ??.
Key Assembly Tips:
- Confirm all components are present before starting.
- Protect your furniture by placing parts on a clean, smooth surface to prevent damage.
- Do not confuse similar screws.
- Do not fully tighten bolts until all parts are connected.
- Periodically check all fittings and re-tighten as necessary.
Parts List
Identify all parts before assembly:
| Part ID | Description | Quantity |
|---|---|---|
| 1 | Tabletop | x1 |
| 2 | Long Support Bar | x2 |
| 3 | Short Support Bar | x1 |
| 4 | Leg | x2 |
Visual Description: The parts consist of a rectangular tabletop (1), two longer horizontal bars (2) for the lower shelf, one shorter horizontal bar (3) for the lower shelf, and two vertical leg frames (4) which form the sides of the table.
Hardware List
Check all hardware is present:
| Hardware ID | Description | Quantity |
|---|---|---|
| A | Screw M6x50 | x10 (+2 spare) |
| B | Screw M6x60 | x8 (+1 spare) |
| C | Allen Key M4 | x1 |
| D | Foot Cap / Leveler | x4 |
Visual Description: Hardware includes screws of two different lengths (A and B), an Allen key (C) for tightening screws, and four adjustable foot caps (D) for the bottom of the legs.
Assembly Steps
Step 1: Assemble the Base Frame
Attach the two Leg frames (4) to the two Long Support Bars (2) using eight M6x60 screws (B) and the Allen key (C). Ensure the holes align correctly. Then, attach the Short Support Bar (3) between the two Leg frames (4) using four M6x50 screws (A).
Diagram Description: This step shows the two leg frames (4) standing upright. The two long support bars (2) are positioned horizontally between the legs, near the bottom. Screws (B) are inserted through the legs into the ends of the long support bars. The short support bar (3) is then fitted horizontally between the legs, above the long support bars, and secured with screws (A). The table in the diagram confirms B x8 and A x4 are used in this step.
Step 2: Attach Tabletop and Foot Caps
Place the Tabletop (1) onto the assembled frame. Secure the tabletop by inserting six M6x50 screws (A) from the underside of the Long Support Bars (2) into the pre-drilled holes on the bottom of the tabletop. Finally, screw the Foot Caps (D) into the bottom of each Leg frame (4).
Diagram Description: This step shows the tabletop (1) being placed on top of the leg frames. Screws (A) are shown being inserted upwards through the long support bars (2) into the tabletop. The foot caps (D) are shown being screwed into the bottom of the legs (4). The table in the diagram confirms D x4 and A x6 are used in this step.
Assembly is now complete. ✔️
Customer Support
If you have any questions or require assistance, please contact the customer care center. Details for the US region are provided below:
US Customer Care:
Phone: 001-877-644-9366
Email: customerservice@aosom.com
Imported by: Aosom LLC
Address: 27150 SW Kinsman Rd, Wilsonville, OR 97070 USA
Made in China.
Note: Contact details for other regions (Canada, UK, France, Germany, Italy, Spain, Portugal) are available in the original document.
