GDW Tow Hitch - Attelage

Assembly (SAMENSTELLING)

• 1 Tow hitch
• 1 Ball holder - two-piece
• 1 Ball 50 complete
• 2 Nuts with bolts M 14-35

Included Parts (SAMENSTELLING)

• 1 Tow hook
• 2 Safety washers 14 mm
• 4 Bolts M12x35mm (*)
• 4 Bolts M12/1.25-40 (A)
• 4 Washers 40-12-4 (A)
• 8 Safety washers 12mm (*-A)
• 1 Safety strap

Composition (COMPOSITION)

• 1 Tow hitch
• 1 Ball carrier bracket
• 1 Ball 50 complete
• 2 Nuts with bolts M 14-35

Included Parts (COMPOSITION)

• 1 Towing piece
• 2 Safety washers 14mm
• 4 Bolts M12x35mm (*)
• 4 Bolts M12/1.25-40 (A)
• 4 Washers 40-12-4 (A)
• 8 Safety washers 12mm (*-A)
• 1 Safety ring

Approval Information

Approval Number: e6*94/20*0078*00

D-value: 7.8

S-value: 75

Mounting Instructions (MONTAGEHANDLEIDING)

1. From the rear of the vehicle, on both sides, remove the towing eyes.
2. Place the tow hitch against the underside of the chassis on the freed holes provided with thread, screw in the bolts. Mount and tighten everything securely.

Mounting Manual (MANUEL DE MONTAGE)

1. Loosen the two towing rings.
2. Place the tow hitch against the holes that come out, with the thread, and tighten the bolts. Mount it and tighten everything well.

Diagram

A diagram shows the tow hitch assembly. It illustrates the main tow bar connecting to the vehicle's chassis at points marked 'A', with bolts and washers indicated. A separate view shows the ball mount and its connection points.

Note

N.B. (*) Standard equipment (can be replaced by original adaptation parts). (A) Standard equipment (can be replaced by original adaptation parts).