Product Image
Image of a dark blue Ford Cougar coupe.
EEC Approval
EEC APPROVAL N°: e6*94/20*0396*00
Towing Capacity Specifications
D-value calculation: D = max kg × max kg × 0.00981 ≤ 8.30 KN
Maximum vertical load (s/): 75 Kg
Maximum towing mass: 1500 Kg
Fitting Instructions
- Disassemble the bumper, the buffer beam, the exhaust, and the heat shield. Permanently remove the towing ring.
- Place the mounting pieces (-c) and (-d) against the inside of the chassis beams with points (A) on the provided drillings. Insert the tubes with the bolts and washers through the outside of the chassis beam into the drillings, but do not tighten yet. Points (B) align with the provided drillings in the front of the body work.
- Place the tow bar with points (B) against the back of the body work plate on the provided drillings which match points (B) of the already mounted pieces (-c) and (-d). Insert the bolts and tighten everything firmly.
- Replace the parts mentioned in point 1. Assemble the parts indicated by [star_ref] and tighten everything firmly.
Composition (Parts List)
| Part | Quantity | Reference |
|---|---|---|
| Tow bar | 1 | Reference 1141 |
| Ball T43L000 | 1 | |
| Bolts M10x110 + nuts | 4 | (A) |
| Bolts M12x35 + nuts | 4 | (B) |
| Bolts M12x40 + nuts | 4 | [star_ref] |
| Washers 40x12x4 | 4 | (A) |
| Security washers M10 | 4 | (A) |
| Security washers M12 | 8 | (B-[star_ref]) |
| Safety shackle | 1 | [star_ref] |
| Mounting tubes (-e) | 4 | (A) |
| Mounting piece (-c) | 1 | (B) |
| Mounting piece (-d) | 1 | (B) |
Bolt and Nut Specifications
All bolts and nuts: quality 8.8
| Bolt Size | Torque (Nm) | Torque (kgm) | Standard |
|---|---|---|---|
| M6 | 10.8 | 1.1 | DIN 912, DIN 931, DIN 933, DIN 7991 |
| M8 | 25.5 | 2.60 | DIN 912, DIN 931, DIN 933, DIN 7991 |
| M10 | 52.0 | 5.30 | DIN 912, DIN 931, DIN 933, DIN 7991 |
| M12 | 88.3 | 9.0 | DIN 912, DIN 931, DIN 933, DIN 7991 |
| M14 | 137.0 | 14.0 | DIN 912, DIN 931, DIN 933, DIN 7991 |
| M16 | 211.0 | 21.5 | DIN 912, DIN 931, DIN 933, DIN 7991 |
All bolts and nuts: quality 10.9
| Bolt Size | Torque (Nm) | Torque (kgm) | Standard |
|---|---|---|---|
| M6 | 13.7 | 1.4 | DIN 912, DIN 931, DIN 933, DIN 7991 |
| M8 | 35.3 | 3.6 | DIN 912, DIN 931, DIN 933, DIN 7991 |
| M10 | 70.6 | 7.20 | DIN 912, DIN 931, DIN 933, DIN 7991 |
| M12 | 122.6 | 12.5 | DIN 912, DIN 931, DIN 933, DIN 7991 |
| M14 | 194.0 | 19.8 | DIN 912, DIN 931, DIN 933, DIN 7991 |
| M16 | 299.2 | 30.5 | DIN 912, DIN 931, DIN 933, DIN 7991 |
Important Notes
- Please consult your car dealer or owner's manual for the maximum permissible towing mass.
- Remove any bitumen coating or anti-vibration material from the fastening positions for the tow bar.
- When drilling, be careful not to damage any brake lines, electrical wiring, or fuel lines.
Manufacturer Information
GDW nv
Hoogmolenwegel 23
B-8790 Waregem
TEL: 32(0)56 60 42 12(5)
FAX: 32(0)56 60 01 93
Email: gdw@gdwtowbars.com
Website: www.gdwtowbars.com
