Bosch Dishwasher Installation Instructions

General Information

The installation instructions are available in multiple languages. Some parts or accessories may be available from customer service.

Part Number: 9001902340

Installation Steps

1. Step 1: Preparation

   Ensure you have the necessary tools and components. A minimum cable length of 1.75 m is required.

   Components:

   • Main unit
   • Mounting brackets
   • Screws (e.g., 4x36, Ø4x13T)
   • Water connection hoses
   • Power cable

2. Step 2: Mounting the Dishwasher

   Position the dishwasher in its designated space. Ensure clearance of at least 608 mm, with a maximum of 608 mm for the unit. The height should be between 815 mm and 875 mm. The width should accommodate a 600 mm space, with a minimum of 570 mm.

   Diagram Description: Visuals show positioning the unit, securing it with brackets, and ensuring it is level.

   Important: Do not pinch or bend the hoses or cables during installation.

3. Step 3: Water Connection

   Connect the water inlet hose to the water supply. The connection requires a G 3/4" or G 1/2" fitting. Ensure the water pressure is between 0.05-1 MPa (0.5-10 bar) and the water temperature is a maximum of 60°C.

   Diagram Description: Illustrations detail connecting the water inlet and drain hoses, emphasizing proper sealing and avoiding kinks.

   Note: Check for leaks after the first wash cycle.

4. Step 4: Electrical Connection

   Connect the power cable to a suitable electrical outlet. The power cable length is typically 2 meters, with options for 5 meters.

   Diagram Description: Shows the electrical connection point and the power cord.

   Safety: Ensure the electrical connection is secure and meets local regulations. Maximum torque for connections is 10 Nm.

5. Step 5: Securing the Unit

   Secure the dishwasher to the surrounding cabinetry using the provided brackets and screws. This ensures stability during operation.

   Diagram Description: Illustrates how to brace the unit vertically and horizontally for stability.

6. Step 6: Final Checks

   Verify all connections are secure and leak-free. Ensure the dishwasher is level and stable. Check that all hoses and cables are properly routed and not kinked.

   Diagram Description: A final check of the installed unit, including water and power connections.

Troubleshooting & Additional Information

Diagram 8: Shows a detailed view of the water connection, including a disc that needs to be removed. It also indicates a maximum flow rate of 10 l/min.

Diagram 8b: Illustrates the electrical connection with a 5m cable option.

Diagram 11: Provides information on water flow rate and pressure requirements.

Diagram 12: Shows the maximum height for the drain hose (max. 1.1 m) and the length of the hoses (2m, 2.2m, 5m).

Note on Part Numbers: Specific parts like the power cable have associated part numbers (e.g., Mat.-Nr. 00350564, Mat.-Nr. 12022522).