Bosch SBD6ECX Series Fully-Integrated Dishwasher Installation Guide

Important Handling and Installation Notes

• Warning: Do not pinch components. [!]
• Action: Ensure components are properly braced or secured vertically. [?]
• Warning: Avoid bending parts. [!]
• Action: Ensure flush mounting where indicated. [?]

Installation Procedures

The following steps outline the installation process, referencing specific tools, fasteners, and measurements. Diagrams illustrate the correct placement and adjustments.

1. Step 1: Secure a component using four 4x30 mm screws.
2. Step 2: Attach a component using four 4x15 mm screws. (Part Number: 00622456)
3. Step 3: Secure another component with four 4x15 mm screws.
4. Step 4: Adjust a component within a range of 0 to 60 mm.
5. Step 5: Ensure proper bracing and vertical alignment of components.
6. Step 6: Perform flush mounting as required by the design.
7. Step 7: Utilize SW 13 and SW 10 tools for necessary adjustments.
8. Step 8: Ensure the installation is suitable for loads between 3.0 kg and 10 kg.
9. Step 9: Adjust mounting brackets to a minimum of 70 mm and a maximum of 120 mm clearance. Ensure no dimension exceeds 120 mm.
10. Step 10: Make alignment adjustments as indicated by the 'x = x' diagram, ensuring symmetry or levelness.
11. Step 11: Use a Torx T20 driver for specific fastening points.
12. Step 12: Note the specified diameter of 38 mm for a particular connection or component.
13. Step 13: Ensure the installation provides a maximum reach of 1.1 meters and maintains a minimum clearance of 280 mm.
14. Step 14: Refer to the following part numbers for replacement or additional components: 00622456, 00350564, 00657927, 12022522.
15. Step 15: A 5-meter length component (e.g., cable or hose) is indicated.

Technical Specifications Summary

• Adjustment Range: 0 - 60 mm
• Fasteners: 4x30 mm screws, 4x15 mm screws
• Required Tools: SW 13, SW 10, Torx T20 driver
• Load Capacity: 3.0 - 10 kg
• Mounting Bracket Adjustment: Min. 70 mm, Max. 120 mm
• Reach/Clearance: Max. 1.1 m, Min. 280 mm
• Component Diameter: 38 mm
• Associated Part Numbers: 00622456, 00350564, 00657927, 12022522