Bosch Dishwasher Installation Guide

Before You Begin

Safety First: Ensure the power is switched off before starting any installation work. Read all instructions before proceeding.

Tools Required: Typically, a Torx T20 screwdriver is needed. Ensure you have the correct tools for the job.

Weight Considerations: The dishwasher unit weighs between 2.5 and 8.5 kg. Ensure you can handle it safely.

Unpacking and Preparation

Carefully unpack the dishwasher and check for any damage. Remove all protective packaging materials.

Important Note: Do not pinch or bend any components during unpacking or installation. Ensure components are not bent (No doblar).

Step-by-Step Installation

Step 1: Mounting the Base

Refer to the diagrams for precise placement and securing of the base components. Use the provided screws (e.g., Torx T20) and ensure a secure fit.

Step 2: Attaching Side Panels

Follow the visual guides to attach the side panels. Pay attention to the orientation and connection points.

Step 3: Installing the Door Mechanism

The diagrams illustrate the installation of the door, including any spring mechanisms or hinges. Ensure smooth operation.

Step 4: Connecting Water Supply

Connect the water inlet hose to the water supply. The pressure should be between 0.05-1 MPa (0.5-10 bar) and the water temperature should not exceed 60°C.

Water Connection Details:

• Inlet hose length: 2.2 m
• Connection thread sizes: G3/4" and G1/2"

Step 5: Connecting Drainage

Connect the drainage hose to the appropriate waste pipe. Ensure the hose is not kinked and has a maximum vertical lift of 1 meter (max. 1 m).

• Drainage hose length: 2 m
• Maximum hose length: 4 m

Step 6: Electrical Connection

Connect the dishwasher to a grounded power outlet. The power consumption is typically low, but ensure the circuit can handle the load. Maximum power rating: 5A.

Step 7: Securing the Dishwasher

Ensure the dishwasher is level and securely fixed in place. Use the provided brackets or mounting points as shown in the diagrams. The unit dimensions are approximately 650 mm, 660 mm, 670 mm, 680-725 mm in height, with a width of 600 mm.

Step 8: Final Checks

Leak Test: After connecting the water supply, check for leaks after one wash cycle. Ensure all connections are tight.

Door Operation: Test the door to ensure it opens and closes smoothly and latches correctly.

Stability: Verify the dishwasher is stable and does not wobble.

Important: Do not overtighten screws (max. 10 Nm).

Product Specifications

• Model Number Example: GV 64x, SW 9001 902 262
• Dimensions: Width 600 mm, Height range 650-725 mm
• Weight Capacity: 2.5-8.5 kg
• Water Pressure: 0.05-1 MPa (0.5-10 bar)
• Water Temperature: Max. 60°C
• Torque: Max. 10 Nm

Multilingual Support

This manual is available in multiple languages. Please refer to the front page for a full list of supported languages, including German, English, French, Italian, Spanish, Dutch, Portuguese, Swedish, Danish, Finnish, Norwegian, Polish, Czech, Hungarian, Russian, Bulgarian, Macedonian, Uzbek, Georgian, Greek, Romanian, Ukrainian, Turkish, Croatian, Serbian, Azerbaijani, Persian, Arabic, Indonesian, Thai, Korean, Chinese, and Japanese.

Customer Service

For further assistance or to obtain replacement parts, please contact customer service. Parts are available through customer service channels (indicated by '*').