Bosch Dishwasher Installation Guide

Preparation and Safety

Estimated Installation Time: 2-3 hours.

Model Reference: GV 64x B Voll-I-86,5 cm-k.SW 9001 881 831 (0310)

Required Tools: Torx T20 screwdriver, possibly SW 10 and SW 13 wrenches.

Materials: Ensure you have appropriate mounting surfaces such as wooden boards or stone slabs.

Important Safety Notes:

• Avoid pinching any cables or hoses [⚠️].
• Follow all instructions precisely.
• Some steps may require removing a disc [➡️ remove disc].

Installation Steps

Step 1: Appliance Placement

Position the dishwasher unit into the designated cabinet space. Drill pilot holes using a Ø2 or Ø4 drill bit as needed and secure the unit with appropriate screws (e.g., 4x15mm, 4x16T, 4x42mm). Ensure the appliance is properly braced or secured vertically [➡️].

Step 2: Water Connection

Connect the water inlet hose to the appliance and the water supply. Use correct fittings (G3/4" and G1/2"). Maintain water pressure between 0.05-1 MPa (0.5-10 bar) and water temperature below 60°C. Recommended hose length is 2m to 4m.

Step 3: Electrical Connection

Connect the appliance to the mains power supply according to local electrical codes and safety standards.

Step 4: Leveling the Unit

Adjust the appliance's feet to ensure it is perfectly level and stable on the floor. This is critical for optimal performance and door function.

Step 5: Attaching Front Panel/Door

Mount the main appliance door or a decorative front panel. Pay attention to hinge weight limits (3-10 kg) and torque specifications (max. 10 Nm). Ensure smooth operation.

Step 6: Securing the Appliance

Secure the dishwasher firmly to the kitchen cabinetry or countertop using the provided brackets and screws. This prevents tipping and ensures stability.

Step 7: Installing Kickplate/Lower Panel

Attach any lower panels or kickplates as shown in the diagrams.

Step 8: Final Checks

Verify all connections are secure. Perform a leak check after the first wash cycle [? Check for leaks]. Ensure all clearances are maintained (e.g., min. 10mm, min. 18mm, max. 1.1m).

Step 9: Side Panel/Insulation Installation

Install any side panels or insulation materials as indicated.

Step 10: Securing the Top

Fasten the top of the appliance to the countertop or cabinet for added stability.

Step 11: Handle/Trim Attachment

Attach any handles or decorative trim pieces to the door or front panel.

Step 12: Waste Water Hose Connection

Connect the waste water hose to the appropriate drain connection.

Step 13: Door Adjustment

Make any necessary adjustments to the door alignment for a flush fit and proper closure.

Step 14: Decorative Panel Mounting

Attach the decorative panel to the appliance door, ensuring it is aligned correctly.

Step 15: Final Securing

Complete the final securing of the appliance to the installation structure.

Step 16: Operation Readiness

The dishwasher is now installed and ready for operation. Refer to the user manual for operating instructions.

Additional Technical Details

Part Numbers: Mat.-Nr. 12022522, Mat.-Nr. 00350564.

Torque Limit: Maximum 10 Nm for specific fastenings.

Bracing: Ensure the unit is properly braced ("verspannen") as illustrated.