Bosch Dishwasher Installation Instructions

General Information

Product Model: SMI8ZCS00X/48

Material Number: 9001 902 404 (0311)

Estimated Installation Time: 2-3 hours

Required Tools: Torx T20 screwdriver, SW 13 wrench, SW 10 wrench.

Important Note: Ensure no parts are pinched during installation.

Languages Available: English, Chinese, Korean, Japanese, Arabic.

Step 1: Preparation and Parts Check

Verify all parts are present before starting. The installation requires specific components and tools.

Diagram shows various parts and tools required, including screws (4x15, 4x42, 4x36), a Torx T20 screwdriver, and measuring tools.

Step 2: Mounting the Dishwasher

Follow the diagrams to correctly mount the dishwasher unit. This involves attaching various brackets and panels.

Diagrams illustrate the process of attaching side panels, base supports, and securing the main unit.

Step 3: Water and Drainage Connections

Connect the water inlet and drainage hoses according to the provided instructions. Ensure secure connections to prevent leaks.

Diagrams show the connection points for water inlet (G3/4" and G1/2") and drainage, with pressure requirements (0.05-1 MPa) and temperature limits (max. 60°C).

Step 4: Electrical Connection

Connect the dishwasher to the power supply. Ensure the electrical connection is safe and compliant with local regulations.

Diagram shows electrical connection details, including voltage and power requirements.

Step 5: Door Panel and Final Assembly

Attach the front door panel and complete the final assembly. Adjustments may be needed for proper door operation.

Diagrams illustrate attaching the door panel, adjusting hinges, and securing the unit in place.

Step 6: Initial Checks and Leak Test

After the first wash cycle, check for any leaks and ensure all connections are secure. The maximum weight capacity for certain components is indicated.

Diagrams show checks for leaks after a wash cycle and indicate weight limits (2.5-8.5 kg) for specific parts.

Additional Components and Adjustments

The installation may involve specific components like drawer runners and adjustable feet. Ensure correct alignment and secure fitting.

Diagrams detail the installation of drawer runners, adjustable feet, and securing mechanisms, with torque specifications (max. 10 Nm).

Troubleshooting and Support

If you encounter issues, refer to the diagrams for troubleshooting. For further assistance, contact customer service.

Diagrams show common installation scenarios and potential issues, along with symbols indicating correct and incorrect procedures.

Safety Information

Follow all safety instructions provided in the manual to ensure safe operation and installation.

Symbols indicate safety precautions, such as avoiding pinching and ensuring proper ventilation.

Product Specifications

Dimensions: Specific dimensions for installation are provided in the diagrams (e.g., min. 18mm clearance, max. 608mm width).

Water Pressure: 0.05-1 MPa (0.5-10 bar)

Water Temperature: Max. 60°C

QR Codes

QR codes are present in the document, likely linking to further information or support resources.