Model No: B7147-2CU
Assembly Instructions
- Attach the lamp holder (A) to the canopy (B) using the nuts (C) to secure.
- Attach the connecting rods (D) to the canopy (B) using the nuts (E) to secure.
- Attach the glass shades (F) to the connecting rods (D) using the nuts (G) to secure.
Diagram 1: Initial Attachment
This diagram illustrates the first step of assembly. It shows the components required to attach the lamp holder (labeled A) to the canopy (labeled B). The securing hardware includes nuts (labeled C). The components listed are: Hex Nut, Tooth Lock Washer, Ground Wire, Iron Spacer, and Canopy (B).
Components: Hex Nut, Tooth Lock Washer, Ground Wire, Iron Spacer, Canopy (B), Lamp Holder (A), Nuts (C)
Diagram 2: Connecting Rods
This diagram shows the process of attaching the connecting rods (labeled D) to the canopy (labeled B). The nuts used for securing are labeled E. The diagram lists the following components: Hex Nut, Spring Washer, Iron Spacer, and Canopy (B).
Components: Hex Nut, Spring Washer, Iron Spacer, Canopy (B), Connecting Rods (D), Nuts (E)
Diagram 3: Attaching Glass Shades
This diagram depicts the attachment of the glass shades (labeled F) to the connecting rods (labeled D). The nuts used for securing are labeled G. The diagram shows the connecting rods (D) extending from the canopy, with the glass shades (F) being attached to their ends using nuts (G).
Components: Hex Nut, Connecting Rods (D), Glass Shades (F), Nuts (G)
Diagram 4: Final Assembly
This diagram shows the completed assembly of the lighting fixture. It illustrates the final configuration where the glass shades are securely attached to the connecting rods, which are themselves attached to the canopy, forming the main body of the fixture.
