MAUI Ceiling & Wall Lamp Installation Guide
Model: MAUI
Installation Overview
This guide provides instructions for installing the MAUI ceiling and wall lamp. Please read all instructions carefully before proceeding.
Dimensions & Clearance: Approximately 8mm clearance is required. Recommended distances from ceiling/wall are 0.6m and 2.4m.
Protection Ratings: The lamp offers various protection levels depending on the specific model, indicated by ratings such as IP66, IP65, IP44, IP43, and IP21.
Important Safety Note: All protective covers must be replaced if broken. A cracked safety glass lampshade must be replaced immediately to prevent injury.
Mounting and Installation Steps
Follow these steps for secure and correct installation:
- Step 1: Attach the mounting bracket to the ceiling or wall using appropriate screws [screw symbol].
- Step 2: Make the electrical connections. Refer to the wire color coding and connection diagram below. Ensure power is disconnected before making connections [power-off symbol].
- Step 3: Secure the main lamp body to the mounting bracket.
- Step 4: Insert the light bulb into the lamp socket [bulb symbol]. Ensure the bulb wattage does not exceed the maximum specified on the lamp's label.
- Step 5: Attach the protective glass cover securely.
- Step 6: Final tightening and checks.
Electrical Connection Diagram
Connect the wires from the wall/ceiling to the corresponding wires on the lamp within the junction box.
| Wire Function | Lamp Wire Color | Wall/Ceiling Wire Color |
|---|---|---|
| Neutral (N) | Blue | Blue |
| Phase (L) | Brown/Black | Brown/Black |
| Ground (PE) | Green/Yellow | Green/Yellow |
Safety Instructions
Read and follow all safety instructions before installation and use:
- Electrical connections must only be performed by qualified persons [tools symbol].
- Important! Before starting installation, disconnect the main power supply by removing the fuse or turning the switch to "OFF" [power-off symbol].
- Lamps with an IP20 protection rating are for indoor use only and cannot be used outdoors.
- Lamps marked with a specific symbol [flammable surface warning] may not be installed on easily flammable surfaces such as wood or carpet.
- Do not install the lamp on surfaces that are damp, freshly painted, or electrically conductive.
- Use fixation systems appropriate for the weight of the lamp.
- Keep wires and connections away from heat sources.
- Ensure wiring is not damaged during the drilling or fixing procedure.
- Always use the correct type of bulb as specified on the lamp's label.
- Keep these instructions in a safe place for future reference.
- Use protective sleeves for mains supply wiring.
- Cleaning is limited to outer surfaces, shades, protective glass, reflectors, and covers [cleaning symbol]. Ensure no moisture enters the terminal compartment or reaches live parts. Gold and brass finished lamps should only be cleaned with a soft, damp cloth (no cleaning agents).
- Use low-pressure halogen lamps with low ultraviolet radiation (UV-STOP) if applicable (indicated by a symbol [UV-STOP symbol]).
- This lamp is suitable for indoor use only, with an ambient temperature of 25°C.
Explanation of Protection Classes
- Protection Class I: This lamp has an earth terminal. The earth wire (yellow and green) must be connected to the terminal indicated by the earth symbol [ground symbol].
- Protection Class II: This lamp is double insulated and must not be connected to an earth wire.
- LED Technology: Lamps with LED technology are constructed with non-replaceable LED systems.
Warranty Information
The manufacturer guarantees the proper functioning of this equipment and provides repairs or spare parts for defects in manufacture for 3 years from the date of delivery. The manufacturer is not responsible for damages or injuries caused by misuse. For any claims, the purchase ticket must be presented. The company agrees to repair any defect or malfunction and any direct damages caused by it. If the repair is unsatisfactory or the object does not meet optimal conditions for its intended use, the warranty holder has the right to a replacement with an item of identical characteristics or a full refund of the purchase price.
Product manufactured in Spain.
Company Address: Camino Valencia, 104. 46190 RIBA-ROJA DEL TÚRIA (Valencia - España)
