SOLVINDEN Pendant Lamp

Safety Information & Product Usage

• ⚠️ For INDOOR & OUTDOOR USE!
• Do not connect the chain to the power supply while it is in the packing.
• The connecting cable cannot be repaired or replaced. If the cable is damaged, the entire fitting must be discarded.
• Do not connect this chain electrically to another chain.
• The bulb is NOT REPLACEABLE.
• CAUTION! Strangulation hazard. Hang out of reach of young children.
• ONLY USE THE PROVIDED SAFETY TRANSFORMER AS THE POWER SUPPLY FOR THE PRODUCT.
• The light source of this luminaire is not replaceable; when the light source reaches its end of life, the whole luminaire shall be replaced.
• This product contains a light source of energy efficiency class G.
• To reduce the risk of strangulation, the flexible wiring connected to this luminaire shall be effectively fixed to the wall if the wiring is within arm's reach.

Parts Included

• 1x Cylindrical main shade component
• 1x Top/bottom cap component
• 3x Curved panel components (forming the main body)
• 4x Connecting clips (small, U-shaped)
• 4x Connecting clips (larger, C-shaped)
• 4x Mounting brackets/holders
• 1x Hook for hanging
• 1x Safety transformer (power adapter)
• 1x Light bulb holder with cord and pull switch

Assembly Instructions

Step 1: Prepare the Light Fitting

Attach the four mounting brackets to the central light fitting assembly. The brackets are inserted into slots on the fitting. [Hand icon] indicates correct placement.

[Diagram shows central light fitting with bulb and pull cord, with 4 mounting brackets being attached to its sides.]

Step 2: Prepare the Curved Panels

Attach the small U-shaped connecting clips to the bottom edge of each of the three curved panel components. [Arrow pointing into clip] shows insertion, [hand icon] shows securing.

[Diagram shows a curved panel with small clips being attached to its bottom vertical bars.]

Step 3: Prepare More Curved Panels

Attach the larger C-shaped connecting clips to the vertical bars of the curved panel components, at various heights. [Arrow pointing into clip] shows insertion, [hand icon] shows securing.

[Diagram shows curved panels with larger clips being attached to their vertical bars.]

Step 4: Attach First Panel to Light Fitting

Connect the first curved panel to the central light fitting assembly by aligning the mounting brackets on the fitting with the larger clips on the panel. [Arrow pointing right] indicates sliding the bracket into the clip.

[Diagram shows the central light fitting with brackets, and the first curved panel being attached using the larger clips.]

Step 5: Attach Second Panel

Connect the second curved panel to the central light fitting assembly, aligning its clips with the corresponding mounting brackets. [Arrow pointing right] indicates sliding the bracket into the clip.

[Diagram shows the second curved panel being attached to the central fitting.]

Step 6: Attach Third Panel

Connect the third curved panel to the central light fitting assembly.

[Diagram shows the third curved panel being attached.]

Step 7: Connect Panels Together

Use the small U-shaped clips to connect the edges of the curved panels together. [Arrow pointing into clip] shows insertion, [hand icon] shows securing.

[Diagram shows close-ups of small clips connecting the vertical bars of adjacent curved panels.]

Step 8: Secure Panels Further

Use more small clips to secure the panels together at different heights.

[Diagram shows more small clips being used to connect the panels.]

Step 9: Final Panel Securing

Ensure all curved panels are securely connected to each other and the central fitting.

[Diagram shows the assembled cage structure.]

Step 10: Prepare the Cylindrical Shade

Attach clips to the top and bottom edges of the cylindrical shade component.

[Diagram shows the cylindrical shade component and clips being attached to its edges.]

Step 11: Attach Cylindrical Shade

Slide the cylindrical shade component over the assembled frame. [Arrow pointing down] indicates placement.

[Diagram shows the cylindrical shade being lowered onto the frame.]

Step 12: Secure Cylindrical Shade

Use the clips attached to the shade to secure it to the frame. [Arrow pointing into clip] shows insertion, [hand icon] shows securing.

[Diagram shows close-ups of clips securing the shade to the frame.]

Step 13: Attach Bulb Holder

Connect the bulb holder assembly to the central fitting. [Arrow indicating rotation/insertion] shows the connection.

[Diagram shows the bulb holder being attached to the central part of the light fitting.]

Step 14: Attach Top Cap

Place the top/bottom cap component onto the top of the assembled structure. [Arrow pointing down] indicates placement.

[Diagram shows the top cap being placed on the lamp.]

Step 15: Secure Top Cap

Use clips to secure the top cap to the structure. [Arrow pointing into clip] shows insertion, [hand icon] shows securing.

[Diagram shows close-ups of clips securing the top cap.]

Step 16: Connect Power Adapter

Connect the safety transformer (power adapter) to the power cord of the lamp. Ensure a secure connection. [Icon with a cross through a hand holding a wire] indicates not to force the connection or use incorrect adapters.

[Diagram shows the connection of the power adapter to the lamp's cord.]

Step 17: Hanging the Lamp

Use the provided hook to hang the lamp from a suitable ceiling fixture. [Diagram shows how to attach the hook to the lamp's suspension cord and then to a ceiling hook.]

Step 18: Light Operation

The light can be operated by repeatedly switching the power on and off using the pull switch or wall switch:

• 1st switch: Light on (full brightness).
• 2nd switch: Light on (dimmed or different effect).
• 3rd switch: Light off.

[Diagram shows sequences of switching: 1x -> light on, 2x -> light on (different), 3x -> light off.]

Important Notes

• Ensure the flexible wiring is securely fixed to the wall if it is within reach to prevent strangulation hazards.