SOLVINDEN Pendant Lamp
Assembly Instructions
Important Safety Information
WARNING!
- For INDOOR & OUTDOOR USE!
- Do not connect the chain to the supply while it is in the packing.
- The connecting cable cannot be repaired or replaced. If the cable is damaged, the entire fitting must be discarded.
- Do not connect this chain electrically to another chain.
- NON-REPLACEABLE BULB.
- CAUTION! Strangulation hazard. Hang out of reach of young children.
- ONLY USE A SAFETY TRANSFORMER AS SUPPLY FOR THE PRODUCT.
The light source of this luminaire is not replaceable; when the light source reaches its end of life, the whole luminaire shall be replaced.
This product contains a light source of energy efficiency class G.
Parts Included
The package contains the following components:
- 1x Main cylindrical body
- 4x Curved vertical panels (labeled 1x)
- 3x Curved vertical panels (labeled 3x)
- 4x Connecting clips (small)
- 4x Connecting clips (large)
- 4x Horizontal support bars
- 1x Hanging hook
Refer to the diagrams for visual identification of parts.
Assembly Steps
- Attach the 4 horizontal support bars to the top of the main cylindrical body. Ensure they are securely clipped in place.
- Take one curved vertical panel (1x) and attach it to the main body using the provided clips.
- Attach the three curved vertical panels (3x) to the main body, ensuring they connect to the horizontal support bars and the base. Use the clips to secure each panel.
- Attach the remaining curved vertical panel (1x) to complete the outer structure.
- Connect the hanging hook to the top of the assembled lamp structure.
- Ensure all connections are secure.
Detailed visual instructions are provided in the original document for each step.
Operation
The lamp has a pull cord for turning it on and off, and potentially for adjusting brightness or modes if applicable.
- Pull once: Light on.
- Pull twice: Light on (potentially brighter or different mode).
- Pull three times: Light off.
Final Safety Note
To reduce the risk of strangulation, the flexible wiring connected to this luminaire shall be effectively fixed to the wall if the wiring is within arm's reach.
