SIMRISHAMN Pendant Lamp
by IKEA
Important Safety Information
IMPORTANT: Always shut off power to the circuit before starting installation work. In some countries, electrical installation work may only be carried out by an authorized electrical contractor. Contact your local electricity authority for advice.
CAUTION: Do not overtighten.
Product Overview
This document provides assembly instructions for the SIMRISHAMN pendant lamp. The lamp features a modern design with multiple arms and glass shades.
Parts Included
- Mounting bracket assembly (parts 153748, 153749)
- Glass shades (3x, part 10046667)
Installation Steps
- Step 1: Prepare the Canopy
Attach the mounting bracket assembly to the ceiling canopy. The diagram shows a hand inserting the bracket into the canopy.
- Step 2 & 3: Route Wires
Feed the electrical wires through the designated slots and clips on the mounting bracket.
- Step 4: Prepare and Secure Wires
Strip approximately 20-40 mm (25/32" - 1"37/64") of insulation from the ends of the electrical wires. Secure the main power cable to the mounting bracket.
- Step 5 & 6: Connect Wires
Connect the live (L) and neutral (N) wires using the provided connectors. Ensure a secure connection by pushing the wires in until they click.
- Step 7 & 8: Connect Lamp Wiring
Connect the lamp's internal wiring to the main supply wires using the connectors, ensuring correct polarity (L to L, N to N).
- Step 9: Mount the Canopy
Attach the canopy assembly to the ceiling. Secure the suspension rod by adjusting the collar.
- Step 10: Install Bulb Holders
Insert the bulb holders into the lamp arms.
- Step 11: Attach Glass Shades
Screw the glass shades onto the bulb holders. Be careful not to overtighten.
Final Checks
Ensure all connections are secure and the lamp is firmly mounted. Refer to the safety warnings regarding overtightening.
