Foxeer WildFire 5.8GHz Goggle Receiver
User Manual V1.0
Introduction
The WildFire is a diversity receiver designed for goggles, providing a stable video feed in various environments such as indoor, outdoor, and multi-path areas. It utilizes a unique algorithm that benefits from fast antenna switching without compromising video feed quality, unlike some other brand receivers. This algorithm effectively minimizes signal latency, increases switch rate, and prevents frame rolls.
02 | Channel
View and select all supported frequencies.
In CHANNEL mode, you can check the current frequency, choose a frequency, check RSSI information, and select it as a favorite frequency.
Controls:
- Long press middle button: Go to the Main Menu.
- Long press right button: Choose/Cancel the favorite frequency.
- Short click left/right button: Turn to other bands.
- Short click up/down button: Turn to other frequencies within the same band.
03 | Favorites ❤️
List all selected favorite channels.
In FAVORITES mode, you can view all your favorite frequencies. You can also add or remove frequencies from your favorites.
Controls:
- Long press middle button: Go to the Main Menu.
- Long press right button: Add/Remove the current frequency to/from favorites.
- Short click left/right button: Select a different frequency band.
- Short click up/down button: Select a different frequency within the same band.
04 | Finder ?
Tracks the signal.
In FINDER mode, the bottom RX module is primarily used. A patch antenna is recommended.
Controls:
- Long press middle button: Go to the Main Menu.
- Short click up/down button: Tune to the next frequency in the same band.
- Short click left/right button: Tune to the next band.
05 | Band Scan ?
Scan channels to find the best frequency and identify interference sources.
In BAND SCAN mode, you can find the best frequency. Click it to set it as the current frequency.
Controls:
- Long press middle button: Go to the Main Menu.
- Short click left/right button: Tune to the next frequency within the same band.
- Short click up/down button: Tune to the next band.
06 | Settings ⚙️
Set parameters according to your preferences.
Settings Options:
- SWITCHING: Fast/Slow/Off. Controls the 2 Rx switch rate. Fast is the default.
- OSD: ON/OFF. Enable/Disable OSD information.
- SHOW RSSI: 6 types of OSD RSSI style overlay on the screen.
- LBR: Left Bar
- CBR: Center Bar
- RBR: Right Bar
- LDG: Left Digit
- CDG: Center Digit
- RDG: Right Digit
- FS SWITCH: ON/OFF.
- ALL BANDS: ON/OFF. If ON, all 72 channels are available. If OFF, only 40 channels (A, B, E, F, R bands) work.
- FAN: ON/OFF. Control the fan on and off.
Controls:
- Long press middle button: Go to the Main Menu.
- Short click up/down button: Select the next option.
- Short click middle button: Enter/Confirm.
07 | Specification
| Parameter | Value |
|---|---|
| Size | 42 x 25 x 23mm |
| Weight (net) | 23g |
| Compatibility | All FatShark Series, 3D STL Case Provided for Attitude and Orqa Users |
| Interface | 5-way button, 0.91" 128x32 OLED screen, Micro-USB |
| OSD | Yes |
| Firmware upgrade | Yes |
| Voltage | 5V~16V |
| Consumption | 0.4A ± 10% @ 5V |
| Frequency | 72CH 5.3-6.0Ghz (A, B, E, F, R, H, U, L, O) |
| Menu | Channel, Favorites, Finder, Band Scan, and Settings |
| Antenna | 2 x SMA |
