Foxeer Wildfire 5.8GHz Goggle Receiver

Introduction

WildFire is a diversity receiver that provides a stable video feed in various environments such as indoor, outdoor, and multi-path areas. WildFire adopts a unique algorithm which benefits from fast switching between antennas without harm to the video feed, which may happen in other brand receivers. The algorithm can effectively minimize signal latency, increase switch rate, and prevent frame rolls.

01 | Main Menu

Long press the middle button to enter the Main Menu.

Short Left/Right click to browse all the modes.

Main Menu Options:

• CHANNEL
• FAVORITES
• FINDER
• BAND SCAN
• SETTINGS

02 | Channel

Check and choose all supported channels.

In CHANNEL mode, you can check the current frequency, choose frequency, check RSSI info, and choose the favorite frequency.

Controls:

• Long press middle button: Go to the Main Menu.
• Long press right button: Choose/Cancel the favorite frequency.
• Short click left/right button: Turn to other bands.
• Short click up/down button: Turn to other frequency in the same band.

03 | Favorites

Lists all selected favorite channels.

In this mode, the user can view the current frequency, select a frequency, view RSSI signals, and add the frequency to favorites.

Controls:

• Long press middle button: Return to the Main Menu.
• Long press right button: Add/Remove the current favorite frequency.
• Short click left/right button: Select different frequency bands.
• Short click up/down button: Select different frequencies within the same band.

In this mode, the user can view all favorite frequencies and can also perform deletion operations.

04 | Finder

Tracks the signal.

In FINDER mode, only the bottom RX works. A patch antenna is recommended.

Controls:

• Long press middle button: Return to the Main Menu.
• Short click left/right button: Select different frequency bands.
• Short click up/down button: Select the next frequency.

05 | Band Scan

Scan channels, find the best frequency.

In BAND SCAN mode, you can find the best frequency, then click it to set it as the current frequency.

Controls:

• Long press middle button: Go to the Main Menu.
• Short click left/right button: Turn to next frequency in the same band.
• Short click up/down button: Turn to next band.

06 | Settings

Set parameters.

In SETTINGS mode, you can set up based on personal preference.

Settings Options:

• SWITCHING: Fast/Slow/Off, controls the 2 Rx switch rate. Fast is default.
• OSD: ON/OFF, Enable/Disable OSD info.
• SHOW RSSI: 6 types of OSD RSSI style overlay on the screen.
• LBR: Left Bar.
• CBR: Center Bar.
• RBR: Right Bar.
• LDG: Left Digit.
• CDG: Center Digit.
• RDG: Right Digit.
• FS SWITCH: ON/OFF.
• ALL BANDS: ON/OFF. If ON, all 80CH are available. If OFF, only 40CH works (A, B, E, F, R band).
• FAN: ON/OFF, controls the fan on and off.

Controls:

• Long press middle button: Go to the Main Menu.
• Short click up/down button: Select the next parameter.
• Short click middle button: Set/Confirm.

07 | Specification