TEEHO Programming Instructions

Model: TE001 / TE001K

Product Overview

This document provides programming instructions for the TEEHO Keyless Entry Door Lock. It covers installation, basic usage, feature settings, and troubleshooting.

Diagram: Exterior and Interior Lock Assemblies

The exterior unit features a keypad, handle/knob, and speaker grille. The interior unit includes a thumbturn and battery compartment.

Information and Safety Warnings

Please read this manual carefully before installation and use. Keep this manual for future reference. Incorrect installation or operation may cause damage to the product or personal injury.

⚠️ WARNING: Always ensure the door is unlocked before programming or attempting to enter. Failure to do so may result in the lock engaging and trapping you outside or inside.

⚠️ CAUTION: Do not expose the lock to extreme temperatures or moisture. Do not use abrasive cleaners. Ensure batteries are installed correctly with correct polarity. Replace batteries when the low battery indicator appears. Keep small parts away from children.

Diagram: Installation Configuration Table

A table detailing different lock states or configurations, possibly related to installation or operation, with columns for 'Door Status', 'Lock Status', and 'Indicator Light'.

Installation

Exterior Assembly

Diagram: Shows the exterior part of the lock with the keypad and spindle.

Interior Assembly

Diagram: Shows the interior part of the lock with the thumbturn and battery compartment.

Install the Exterior Assembly: Mount the exterior unit through the door, ensuring the spindle passes through the door correctly.
Install the Interior Assembly: Attach the interior unit to the spindle and align it with the mounting plate.
Connect the Cable: Connect the wire harness from the exterior unit to the interior unit.
Install Batteries: Insert 4 AA alkaline batteries into the interior unit, observing correct polarity.
Test the Lock: Manually operate the lock mechanism to ensure smooth movement.
Secure the Interior Assembly: Fasten the interior unit to the door.
Install the Strike Plate: Mount the strike plate on the door frame in the correct position for the deadbolt.

How to Use

Unlocking with Code:
Diagram: Sequence showing pressing the TEEHO button, entering a code, and the lock turning with a green light.

To unlock, press the TEEHO button, enter your valid user code on the keypad, and the deadbolt will retract. A green light confirms successful operation.
Manual Operation:
Diagram: Shows the interior thumbturn being rotated.

The door can be locked or unlocked from the inside by manually turning the thumbturn on the interior assembly.
Low Battery Indicator:
Diagram: Shows a red light flashing.

A flashing red light on the keypad indicates that the batteries are low and need to be replaced.

Feature Detail Setting

Item	Specifications	Value
Master Code	6-8 digits	12345678
User Code	4-8 digits	(User Set)
Auto Lock Time	5-90 seconds	30 seconds
Passage Mode	Enable/Disable	Disable
Tamper Alarm	Trigger after 5 incorrect code entries	Enabled
Low Battery	Indicator light flashes red	N/A
Battery Type	4 x AA Alkaline Batteries	N/A
Operating Temp.	-20°C to 60°C (-4°F to 140°F)	N/A
Door Thickness	35mm - 50mm (1 3/8" - 2")	N/A

Code Setting

Follow these steps to program your lock:

1. Setting the Master Code

Press the TEEHO button. Wait for a long green light.
Enter the current Master Code. Wait for a flashing green light.
Enter the new Master Code (6-8 digits). Wait for a flashing green light.
Re-enter the new Master Code. Wait for a long green light.

Result: New Master Code is set.

2. Adding a User Code

Press the TEEHO button. Wait for a long green light.
Enter the Master Code. Wait for a flashing green light.
Press '1' (to add User Code). Wait for a flashing green light.
Enter the User Code (4-8 digits). Wait for a flashing green light.
Re-enter the User Code. Wait for a long green light.

Result: User Code is added.

3. Deleting a User Code

Press the TEEHO button. Wait for a long green light.
Enter the Master Code. Wait for a flashing green light.
Press '2' (to delete User Code). Wait for a flashing green light.
Enter the User Code to delete. Wait for a flashing green light.
Re-enter the User Code to delete. Wait for a long green light.

Result: Specified User Code is deleted.

4. Deleting All User Codes

Press the TEEHO button. Wait for a long green light.
Enter the Master Code. Wait for a flashing green light.
Press '3' (to delete all User Codes). Wait for a flashing green light.
Re-enter the Master Code. Wait for a long green light.

Result: All User Codes are deleted.

5. Enabling/Disabling Passage Mode

Press the TEEHO button. Wait for a long green light.
Enter the Master Code. Wait for a flashing green light.
Press '4' (for Passage Mode). Wait for a flashing green light.
Enter '1' to enable or '0' to disable. Wait for a flashing green light.
Re-enter '1' to enable or '0' to disable. Wait for a long green light.

Result: Passage Mode is set.

Troubleshooting

1. Lock does not respond

Possible Cause: Batteries are low or dead.
Solution: Replace batteries with new AA alkaline batteries.
Possible Cause: Batteries installed incorrectly.
Solution: Ensure batteries are inserted with correct polarity.
Possible Cause: Loose connection.
Solution: Check cable connection between interior and exterior units.

2. Cannot set Master Code

Possible Cause: Incorrect current Master Code entered.
Solution: Ensure you are entering the correct existing Master Code.
Possible Cause: New Master Code does not meet requirements (e.g., length).
Solution: Ensure the new Master Code is 6-8 digits.

3. User Code not accepted

Possible Cause: Incorrect User Code entered.
Solution: Ensure you are entering the correct User Code.
Possible Cause: User Code not properly programmed.
Solution: Re-program the User Code following the instructions.

4. Lock jams or is difficult to turn

Possible Cause: Door alignment issues.
Solution: Check door and frame alignment. Adjust strike plate if necessary.
Possible Cause: Spindle not properly seated.
Solution: Ensure the spindle is correctly installed.

	TEEHO TE001 Keyless Entry Door Lock Installation Guide Step-by-step instructions for installing the TEEHO TE001 keyless entry door lock, including door preparation, parts identification, and assembly.
	TEEHO Smart Lock Reset Guide: Step-by-Step Instructions This guide provides clear, step-by-step instructions for resetting TEEHO keyless entry door locks, including models like TE001 and TE002K. Essential for maintaining your smart lock.
	TEEHO TE001K Keyless Entry Door Lock and Door Knob Installation Guide Comprehensive installation instructions for TEEHO TE001K keyless entry door locks and door knobs, covering door preparation, parts identification, and step-by-step assembly for secure and easy installation.
	TEEHO TE002K Fingerprint Door Lock Installation Guide Comprehensive installation instructions for the TEEHO TE002K Fingerprint Door Lock, detailing door preparation, parts identification, and step-by-step assembly for a secure and easy setup.
	TEEHO TE002 Fingerprint Door Lock Installation and Programming Guide Comprehensive guide for installing and programming the TEEHO TE002 Fingerprint Door Lock, covering door preparation, parts identification, installation steps, and various programming functions.
	TEEHO TE012W WiFi Smart Lock User Manual: Setup, App Guide, and Troubleshooting Comprehensive user manual for the TEEHO TE012W smart lock. Learn how to pair the app, set up PIN codes, manage fingerprints, lock/unlock, reset the device, and troubleshoot common issues. Includes programming guide and FAQ.
	TEEHO TZ001 Keypad Door Lock Installation Instructions Comprehensive installation guide for the TEEHO TZ001 Keypad Door Lock, detailing door preparation, parts identification, and step-by-step assembly for a secure and functional smart lock.
	TEEHO Keyless Entry Door Lock Programming Instructions Comprehensive programming instructions for TEEHO keyless entry electronic door locks, covering setup, features, and troubleshooting for model TK004.