Baby Trend Lil Snooze Deluxe Nursery Center

Model: PY81JR

Warranty Information

DO NOT RETURN YOUR PRODUCT TO THE STORE. PLEASE CONTACT BABY TREND FOR REPLACEMENT PARTS, SERVICE AND REPAIR.

The Baby Trend® warranty covers workmanship defects within the first 180 days of purchase. Any product subjected to misuse, abuse, abnormal use, excessive wear and tear, improper assembly, negligence, environmental exposure, alteration, or accident, or with a altered/removed serial number invalidates all claims against the manufacturer. Any damage to property during installation is the sole responsibility of the end user.

Customer Service: 1 (800) 328-7363, Monday through Friday, 8:00 am - 4:30 pm PST. Return Authorizations are required. Warranty valid only in North America.

(Spanish and French warranty information is also provided in the original document but is omitted here for conciseness in the primary language.)

Contact Information

Baby Trend, Inc.
1607 S. Campus Ave.,
Ontario, CA 91761

Phone: 1-800-328-7363 (8:00 am - 4:30 pm PST)

Website: www.babytrend.com

Important Safety Instructions

Read all instructions BEFORE assembly and USE of product. KEEP INSTRUCTIONS FOR FUTURE USE.

General Warnings

  • ⚠️ WARNING: NEVER LEAVE INFANT IN PRODUCT WITH SIDES DOWN. Infant may roll into space between pad and loose mesh side causing suffocation.
  • ⚠️ WARNING: INFANTS CAN SUFFOCATE:
    • In gaps between a mattress too small or too thick and product sides.
    • On soft bedding.
    Never add a mattress, pillow, comforter, or padding. Use only the mattress provided by manufacturer. Never use a water mattress.
  • ⚠️ WARNING: See playard floor and side rails for warning.
  • ⚠️ WARNING: Failure to follow the instructions could result in serious injury or death.
  • The playard, including side rails, must be fully erected prior to use. Make sure latches are secure.
  • Strings can cause strangulation! NEVER place items with a string around a child's neck. NEVER suspend strings over playard or attach strings to toys.
  • Discontinue use when child can climb out or reaches 35 in. (890 mm) or 30 lbs. (13.6 kgs), whichever comes first.
  • When child can pull to standing, remove bumper pads, large toys, and other objects that could serve as steps.
  • NEVER place product near a window where cords from blinds or drapes can strangle a child.
  • Always provide necessary supervision. NEVER leave child unattended.
  • To reduce the risk of SIDS, place infants on their back to sleep, unless advised by physician.
  • Child can become entrapped and die if improvised netting or covers are placed on top of a play yard.
  • NEVER leave child in product with sides lowered. Ensure sides are raised and locked.
  • NEVER use plastic shipping bags or film as mattress covers not intended for this purpose; they can cause suffocation.
  • This product is not intended for commercial use.
  • If using a sheet, use only the one provided by the manufacturer or one specifically designed for the mattress.
  • NEVER leave the bassinet in place when child is in playard.
  • NEVER leave the Napper in place when child is in the playard. Only one child can use the Nursery Center at any time.
  • ALWAYS ensure the playard, changing table, and napper are safe by checking regularly that every part is properly and securely in place.
  • NEVER use this product if there are any loose or missing fasteners, loose joints, broken parts, or torn mesh/fabric. Contact Baby Trend Customer Service at 1-800-328-7363 for replacement parts or repair. NEVER substitute parts.

Parts Identification

Check the parts list on the back cover to make sure you have all the parts for this model before assembling the playard.

  • Playard: The main playpen structure.
  • Travel / Storage Bag: For carrying or storing the playard.
  • Bassinet with metal support tubes: An elevated sleeping area within the playard.
  • Short Bar with Connector Knob (2): Shorter frame pieces with knobs for assembly.
  • Long Curved Bar (2): Longer, curved frame pieces for assembly.
  • Changing Table: An accessory that attaches to the playard.
  • Mattress: The padded base for the playard.
  • Toy Bar with plush toys**: An accessory bar with toys.
  • Napper Fabric: Fabric component for the napper accessory.
  • Napper Frame Bars (2): Frame pieces for the napper.
  • Napper Support Tubes (2): Support tubes for the napper.
  • Diaper Stacker*: An accessory for organizing diapers.
  • Parent Organizer*: An accessory for organizing parent items.
  • Music Center (if equipped): An electronic unit with music, nature sounds, sleep sounds, night light, and vibration.

*Type may vary. **Type and quantity may vary.

Assembly Instructions

IMPORTANT! To ensure safe operation, follow these instructions carefully and keep them for future reference. Adult assembly is required.

To Assemble Playard

  1. Unzip the bag and remove the Playard frame. Undo the fasten straps and set the mattress aside. DO NOT push the center down yet.
  2. Ensure all four top rails are fully erected. Pull up one rail at a time, holding each side of the rail, and pull sharply upwards. Do not pull from the middle where the center latch release is located. Ensure both tubes latch securely and each rail is rigid. IMPORTANT: The center must be raised while locking the rails. If one rail locks but the other does not, unlock the rail by squeezing the release in the center and try again.
  3. Once all four top rails are locked, push down on the center handle. The center mechanism will automatically lock. IMPORTANT: Test each top rail by pushing down slightly to confirm it is rigid and securely in place. IMPORTANT: The center handle must remain raised (approx. 45.7 cm or 18 inches) while locking the side rails. If the center is not raised, the rails will not lock. If you experience difficulty, unlock the rail by squeezing the center release and try again.
  4. Place the Mattress on the floor of the Playard with the padded side facing up.
  5. Insert the hook & loop fasteners on the underside of the Mattress through the slots in the floor on each end of the Playard. Fasten them to the underside of the Playard floor to prevent the Mattress from moving.
  6. To operate the brakes on the wheels, press downward on the brake levers. To release, lift upward on the lever.

Folding Playard

  1. Release the hook and loop fasteners holding the Mattress from underneath the Playard floor or Bassinet and set the mattress aside.
  2. DO NOT unlock top rails yet; the center of the floor must be raised before top rails will unlock.
  3. Rotate the center handle counter-clockwise 90 degrees and raise the center as high as the top rails. Gather the Legs and Wheels together towards the center as close as possible so they nearly touch.
  4. Locate the rail latch release in the center and bottom side of each rail. Squeeze the lever with two hands until the rail releases the two tubes, then push down. NOTE: If top rail(s) do not release completely, DO NOT FORCE! Lift the center of the floor higher. Both tubes must be released for the top rail to fold.
  5. Gather four corners and center tightly. Wrap the Mattress around the Playard frame with the padded side facing inward.
  6. Secure the hooks and loop fasteners by feeding them through the loops on the end of the Mattress and folding them back onto themselves. Place the folded Playard into the carry bag so the handle comes through the opening between the zipper sides.

To Use as a Bassinet

Skip to page 20 for bassinet installation instructions.

Changing Table Assembly

ATTENTION: Playard must be fully assembled and securely locked before installing or using the changing table feature.

  1. Connect the two (2) Long Curved Bars together.
  2. Insert the assembled curved bars into the Changing Table fabric. Slide the Curved Bars around inside the sleeve of the Changing Table.
  3. Connect the two (2) Short Bars to each end of the Long Curved Bar. Ensure the knobs face down and in the same direction on each end.
  4. Insert Connector Knob Prongs into holes located on both corners of the Playard.
  5. Turn the Connector Knobs counter-clockwise to lock into place.
  6. Flip the Changing Table over onto the Playard.
  7. Snap the two (2) buttons on the flap down onto the Playard.
  8. Secure the changing table to the playard frame by fastening the hook and loop fasteners on the underside of the changing table to the side rails of the playard frame.

To Use the Changing Table Restraint System

  1. Place child on the changing table, ensuring hands and arms are clear of the restraint. Bring the restraint around the child's waist and clip the buckle ends together.
  2. Tighten strap until snug around the child's waist. DO NOT OVER TIGHTEN.
  3. To remove, unsnap the buckle. ATTENTION: NEVER use the changing table if it is damaged or broken.

To Remove the Changing Table

  1. Flip the Changing Table to the outside of the Playard. Unsnap the fabric flap from the Playard. Twist Connector Knobs clockwise to unlock.
  2. Remove the Changing Table from the Playard and disconnect the Short Bars from the Curved Bar by pressing snap buttons and pulling apart. Remove the Curved Bar from the Changing Table sleeve.

Parent Organizer Assembly

  1. Parent Organizer: Position each hook so the hooked end faces the rear. Press the hook firmly into the slot until it snaps into place.
  2. Diaper Stacker: Skip to step 2.
  3. Connect the Parent Organizer/Diaper Stacker to the Playard by sliding the two connecting clips over an open portion of the top rail. NOTE: Installation is only possible on open sides where clips attach easily without interfering with other features.

Deluxe Side Pocket Organizer

The Deluxe Side Pocket Organizer is conveniently located on the side of your Playard, equipped with multiple pockets for baby essentials.

WARNING: Do not place hot liquids or more than 2 pounds in the organizer. Serious burns or unstable conditions could result. Do not allow children to hang or play with side pockets.

Napper Assembly

ATTENTION: Playard must be fully assembled and securely locked before installing or using the Napper feature.

  1. Pull the napper fabric flaps up at the top and bottom.
  2. Insert the left napper frame bar into the left sleeve of the napper fabric, ensuring the bar curves upwards. Repeat for the right side. NOTE: The curve of the bar must be upward.
  3. At the bottom of the napper, insert the left and right frame bars into the napper support tubes and slide inward until they lock. Ensure supports are seated and locked.
  4. Pull the top napper fabric flap down and ensure it is secured.

Attaching the Napper to the Playard

  1. Slide the napper into the bassinet and push into the playard until it locks. NOTE: DO NOT use the napper on the playard without the bassinet and securing the clips.
  2. To remove the napper, push both napper support tubes buttons and pull both tubes out.

Toy Bar Installation

WARNING: Possible entanglement injury. Keep out of baby's reach. Remove toy bar when baby begins to push up on hands and knees.

  • Always attach provided fasteners tightly. Check frequently.
  • DO NOT add extra strings or straps.
  • DO NOT attach the toy bar with child in Playard or Bassinet.
  • The toy bar is not a carry handle.
  1. Push down on the ends of the toy bar to secure it onto the top of the frame.

Music Center Operation

The Music Center requires 4 AA batteries (not included). Install batteries as shown in Figure 28.

  • Music: Press the MUSIC button to play melodies. Press again to change songs. ?
  • Nature Sounds: Press the NATURE button to play nature sounds. Press again to change sounds. ?
  • Sleep Music: Press the SLEEP button to play sleep sounds. Press again to change songs. ?
  • Volume Control: Two buttons control the unit's volume. ?
  • Vibration: Press the VIBRATION button once to activate speed, press again for faster speed, press again to reduce speed. ?
  • Night Light: Press the NIGHT LIGHT button. ?

The Music Center is designed to attach to the playard's/bassinet's long rail.

FCC Statement

This device complies with Part 15 of the FCC rules. Operation is subject to two conditions: 1) it may not cause harmful interference, and 2) it must accept any interference received, including interference that may cause undesired operation.

WARNING: Changes or modifications not expressly approved by the responsible party could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with Class B digital device limits, per Part 15 of FCC Rules, to provide reasonable protection against harmful interference in residential installations. It generates, uses, and can radiate radio frequency energy and may cause interference if not installed per instructions.

If interference occurs, try reorienting the antenna, increasing separation between equipment and receiver, connecting to a different circuit, or consulting a dealer/technician.

(Canada ICES-003 Statement is also provided in the original document but is omitted here for conciseness.)

PDF preview unavailable. Download the PDF instead.

PY81XXXJR 3L 040417 Adobe PDF Library 11.0 Adobe InDesign CC (Macintosh)

Related Documents

Preview Baby Trend Lil Snooze Deluxe Nursery Center - Instruction Manual
Comprehensive instruction manual for the Baby Trend Lil Snooze Deluxe Nursery Center (Model PY811), covering assembly, safety warnings, parts identification, and maintenance instructions. Includes guidance on playard, bassinet, changing table, and toy bar setup.
Preview Baby Trend Lil Snooze Deluxe Nursery Center Instruction Manual
This manual provides comprehensive instructions for the Baby Trend Lil Snooze Deluxe Nursery Center (Model PY81A66i), covering assembly, safety warnings, operation, and warranty information. It details the setup of the playard, bassinet, changing table, napper, toy bar, and music center.
Preview Baby Trend Lil Snooze Deluxe Nursery Center Instruction Manual
This manual provides detailed instructions for assembling, using, and maintaining the Baby Trend Lil Snooze Deluxe Nursery Center (Model RC81XXXJR), including important safety warnings, operation guidance, and regulatory information.
Preview Baby Trend RC81A81 Playard & Nursery Center: Assembly and Safety Manual
Comprehensive instruction manual for the Baby Trend RC81A81 Playard and Nursery Center, covering warranty, safety warnings, assembly steps for all components, and maintenance instructions.
Preview Baby Trend Lil' Snooze™ Deluxe II Nursery Center Playard Instruction Manual
Comprehensive instruction manual for the Baby Trend Lil' Snooze™ Deluxe II Nursery Center Playard, covering assembly, safety warnings, maintenance, and accessory installation. Includes detailed steps for setting up the playard, bassinet, and changing table.
Preview Baby Trend Lil Snooze Deluxe Nursery Center Instruction Manual
Comprehensive instruction manual for the Baby Trend Lil Snooze Deluxe Nursery Center, covering assembly, safety, and usage of the playard, bassinet, and changing table.
Preview Baby Trend Deluxe II Nursery Center Instruction Manual
Comprehensive guide for assembling, using, and maintaining the Baby Trend Deluxe II Nursery Center playard. Includes safety warnings, parts list, step-by-step assembly instructions for the playard, bassinet, and changing table, accessory information, and care instructions.
Preview Baby Trend Lil Snooze Nursery Center Instruction Manual
Comprehensive instruction manual for the Baby Trend Lil Snooze Nursery Center, covering assembly, safety warnings, maintenance, operation, and warranty information. Includes detailed steps and part identification.