Lumary USER MANUAL

Specifications

Dimmable, 16 Million Color, Music Sync, App Control, Local control.

Please note that all colorful lights cannot be DIY cut!

IR Remote Controller 24KEY

The IR remote controller has 24 keys for various functions:

1. LED brightness adjustment [+]: Increase sensitivity in music mode.
2. LED brightness adjustment [-]: Reduce sensitivity in music mode.
3. ON/OFF button.
4. LED white button: Switch between cold and warm white colors.
5. LED color buttons: Select Red, Green, or Blue colors.
6. Timing function ON/OFF lights: Set timer for 1 hour, 4 hours, or 8 hours.
7. Music modes: Select from 3 music modes.
8. Scene modes: Select from 5 fixed colorful scene modes.
9. Brightness buttons: Adjust brightness to 25%, 50%, or 100%.
10. Scene mode loop: Switches scenes automatically every 30 seconds.
11. Mode switch: Switch the mode of light forward or backward in scene or monochrome mode.

Operation Instructions:

Please pull out the plastic tab from the bottom of the IR remote to ensure the battery is powered properly.

Ensure the IR remote aims at the IR receiver within the sensing distance. The angle of the IR receiver is 120°, and the sensing distance is 16.4 ft. Please use the remote control within the sensing range.

Setting Lumary App

Download and Install: Download the "Lumary" App from the App Store or Google Play Market.

Account Registration and Connection: Register a Lumary account by entering your email address and logging into the App. Please select your region and country.

Device Pairing:

To activate pairing mode for the light, follow these steps:

1. If the light is off when powered on, press the button for 5 seconds.
2. If the light is already on when powered on, press the button 5 times quickly.
3. If the light is already on, press the button twice in a row to turn off the device first, and then use method 1.

Steps for connecting:

1. Enable Bluetooth.
2. Ensure the device is in pairing mode when powered on.
3. Open the Lumary App, tap '+' in the top corner of the Devices screen, and select 'Add Device' to confirm pairing.
4. If pairing fails, hold the light controller button for 5 seconds to ensure it is in pairing mode.

App Interface and Features

The Lumary app interface allows users to add devices, search for nearby devices, and add them manually. Once added, devices appear in a list, confirming successful integration.

The app provides control over smart lights, including DIY color customization, selection from various color palettes, and modes such as Energy, Rhythm, Rolling, and Spectrum. Sensitivity can be adjusted.

Product Features

The light string offers 16 million colors, 7 single colors, over 80 scene modes, and 4 music modes. The light controller features a built-in sensitive microphone for music synchronization, allowing lights to react to sound. The lights have a memory function and a timer. Control is available via remote and app for refined adjustments.

FCC ID: 2AKBP-HELLOFAIRY. Made in China. Compliance marks: FCC, RoHS.

Voice Control Guide

To enable voice control, a separate gateway is required to link the device.

WARNING: Battery Safety

INGESTION HAZARD: This product contains a button cell or coin battery. DEATH or serious injury can occur if ingested. A swallowed battery can cause internal chemical burns within hours. KEEP new and used batteries OUT OF REACH OF CHILDREN. Seek immediate medical attention if a battery is suspected to be swallowed.

Requirements for consumer products containing button cell or coin batteries:

• Remove and recycle or dispose of used batteries according to local regulations. Do NOT dispose of batteries in household trash or incinerate.
• Even used batteries may cause severe injury or death.
• Call a local poison control center for treatment information.
• Indicate compatible battery type (e.g., LR44, CR2025) and nominal battery voltage (e.g., 3V).
• Non-rechargeable batteries are not to be recharged.
• Do NOT force discharge, recharge, disassemble, heat, or incinerate batteries, as this may result in injury.

Products with replaceable button/coin cell batteries shall additionally include:

• Ensure batteries are installed correctly according to polarity [+ and -].
• Do not mix old and new batteries, or batteries of different brands or types (e.g., alkaline, carbon-zinc, rechargeable).
• Remove and recycle or dispose of batteries from equipment not used for an extended period.
• Always secure the battery compartment. If it does not close securely, stop using the product, remove batteries, and keep them away from children.