RÅDMANSÖ Bedside Table Assembly Instructions

Important Safety Information

⚠️ WARNING: This is a delicate table. Do not sit on the product.

⚠️ WARNING: Do not place heavy objects on this product. The maximum load capacity is 25 kg (55 lb).

Assembly Steps

1 Attach the left drawer slide (CL) to the left side panel using six screws (10115917).

2 Attach the right drawer slide (CR) to the right side panel using six screws (10115917).

3 Assemble the main cabinet box. Connect the base panel, side panels, and top panel using screws (10x 118331, 4x 124539).

4 Attach the left side panel to the base panel using screws. Ensure correct orientation; an incorrect placement is indicated by a red cross symbol (❌).

5 Attach the right side panel to the base panel using screws. Ensure correct orientation; an incorrect placement is indicated by a red cross symbol (❌).

6 Attach the top panel to the assembled side panels and back panel using screws.

7 Insert the back panel into the grooves and secure it.

8 Attach the first leg. Insert the leg component (102509) into the base and secure it with screws.

9 Attach the second leg similarly.

10 Attach the remaining two legs to the base.

11 Position the main cabinet body onto the leg structure. Align holes.

12 Secure the cabinet body to the leg assembly using screws (4x 100001, 4x 10114655, 4x 10114653).

13 Continue securing the cabinet body to the leg assembly using screws (4x 103095, 4x 10121165).

14 Attach the final leg components and secure them.

15 Install the drawer runners inside the cabinet. Use the provided hardware.

16 Attach the drawer front and sides. Use screws (4x 10075382).

17 Place the drawer bottom panel into the assembled drawer frame.

18 Adjust the leveling feet on the bottom of each leg to ensure the bedside table is stable and level (? symbol indicates adjustment).

19 Assemble the drawer box. Connect the drawer sides and back panel using screws.

20 Attach the drawer slides (DR and DL) to the sides of the drawer box using screws (2x 10115917, 4x 10047245).

21 Attach the drawer front to the assembled drawer box. Ensure it aligns correctly.

22 Attach the remaining drawer slides to the drawer box using screws (4x 159553, 4x 117434).

23 Insert the completed drawer into the cabinet. The drawer slides should engage with the runners inside the cabinet. A "Click!" sound indicates proper engagement.

24 Final check of the assembled drawer and cabinet.

25 The RÅDMANSÖ bedside table is now assembled and ready for use.